FCP22N60N-F102 Equivalent & Substitute Parts

Part Overview

The FCP22N60N-F102 is an N-Channel 600V 22A MOSFET manufactured by onsemi in a Through Hole TO-220-3 package. This device is rated for 205W maximum power dissipation and operates across a temperature range of -55°C to 150°C. The part is classified as Obsolete, making identification of equivalent and substitute components essential for ongoing system support, design continuity, and procurement planning. Equivalent parts maintain identical electrical and mechanical specifications, while substitute parts provide functional alternatives with acceptable parameter variations within the same application category.

Key Parameters

Parameter	Value	Unit
Drain to Source Voltage (Vdss)	600	V
Continuous Drain Current (Id) @ 25°C	22	A
On-State Resistance (Rds On) @ 11A, 10V	165	mOhm
Gate Threshold Voltage (Vgs(th)) @ 250µA	4	V
Gate Charge (Qg) @ 10V	45	nC
Input Capacitance (Ciss) @ 100V	1950	pF
Maximum Power Dissipation (Tc)	205	W
Operating Temperature Range	-55 to 150	°C
Package Type	TO-220-3	—
Mounting Type	Through Hole	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution of the FCP22N60N-F102 is determined by alignment of critical electrical parameters: Drain to Source Voltage (Vdss), Continuous Drain Current (Id), On-State Resistance (Rds On), Gate Threshold Voltage (Vgs(th)), and package compatibility. The primary grouping criterion is the 600V voltage rating combined with current handling capability in the 18A to 24A range. Parts are classified into two categories:

Parametric Equivalent: FCP22N60N maintains identical specifications to the FCP22N60N-F102 across all electrical parameters and operates in the same TO-220-3 package. This part differs only in packaging format (Tube versus unspecified) and represents a direct functional replacement.

Functional Substitutes: Parts including NTP165N65S3H, STFH24N60M2, SIHA22N60AE-E3, IPAW60R180P7SXKSA1, IPA60R180P7SXKSA1, and IXTP24N65X2M operate within acceptable parameter ranges for the same application class. These substitutes maintain Vdss ratings between 600V and 650V, continuous drain currents between 18A and 24A, and compatible TO-220 package variants. Rds On values range from 145mOhm to 190mOhm, and all parts operate across the -55°C to 150°C temperature range. All substitute parts are RoHS3 compliant and carry EAR99 ECCN classification.

Parameter Comparison

Part Number	Manufacturer	Vdss (V)	Id @ 25°C (A)	Rds On (mOhm)	Vgs(th) (V)	Qg (nC)	Ciss (pF)	Pd Max (W)	Package	Status
FCP22N60N-F102	onsemi	600	22	165 @ 11A	4 @ 250µA	45 @ 10V	1950 @ 100V	205	TO-220-3	Obsolete
FCP22N60N	onsemi	600	22	165 @ 11A	4 @ 250µA	45 @ 10V	1950 @ 100V	205	TO-220-3	Obsolete
NTP165N65S3H	onsemi	650	19	165 @ 9.5A	4 @ 1.6mA	35 @ 10V	1808 @ 400V	142	TO-220-3	Not For New Designs
STFH24N60M2	STMicroelectronics	600	18	190 @ 9A	4 @ 250µA	29 @ 10V	1060 @ 100V	35	TO-220FP	Active
SIHA22N60AE-E3	Vishay Siliconix	600	20	180 @ 11A	4 @ 250µA	96 @ 10V	1451 @ 100V	33	TO-220-3 Full Pack	Active
IPAW60R180P7SXKSA1	Infineon Technologies	650	18	180 @ 5.6A	4 @ 280µA	25 @ 10V	1081 @ 400V	26	TO-220-3 Full Pack	Not For New Designs
IPA60R180P7SXKSA1	Infineon Technologies	600	18	180 @ 5.6A	4 @ 280µA	25 @ 10V	1081 @ 400V	26	TO-220-3 Full Pack	Active
IXTP24N65X2M	IXYS	650	24	145 @ 12A	5 @ 250µA	36 @ 10V	2060 @ 25V	37	TO-220-3 Full Pack, Isolated Tab	Active
AOTF190A60L	Alpha & Omega Semiconductor Inc.	600	20	190 @ 7.6A	4.6 @ 250µA	34 @ 10V	1935 @ 100V	32	TO-220F	Not For New Designs

Engineering Selection Recommendations

Direct Equivalent Selection: FCP22N60N is the parametric equivalent to FCP22N60N-F102. Both parts maintain identical electrical specifications and TO-220-3 package compatibility. Selection of FCP22N60N is appropriate when exact specification matching is required and availability permits. Both parts carry Obsolete status, requiring inventory verification before procurement.

Active Product Substitutes: For applications requiring active product status with ongoing manufacturer support, IPA60R180P7SXKSA1 (Infineon Technologies, Active) and SIHA22N60AE-E3 (Vishay Siliconix, Active) are suitable alternatives. IPA60R180P7SXKSA1 maintains 600V Vdss rating with 18A continuous drain current and is RoHS3 compliant. SIHA22N60AE-E3 provides 600V Vdss with 20A continuous drain current, also RoHS3 compliant. Both operate across the full -55°C to 150°C temperature range.

Higher Current Capability: IXTP24N65X2M (IXYS, Active) offers 24A continuous drain current at 650V Vdss with lower Rds On (145mOhm), providing enhanced current handling and reduced conduction losses. This part is suitable for applications requiring improved thermal performance or higher current margins.

Voltage Margin Consideration: NTP165N65S3H (onsemi, Not For New Designs) and IPAW60R180P7SXKSA1 (Infineon Technologies, Not For New Designs) provide 650V Vdss rating, offering additional voltage margin over the 600V specification. These parts are classified as Not For New Designs and should be reserved for legacy system support.

Thermal Performance Trade-off: STFH24N60M2 (STMicroelectronics, Active) and AOTF190A60L (Alpha & Omega Semiconductor Inc., Not For New Designs) exhibit reduced maximum power dissipation (35W and 32W respectively) compared to the FCP22N60N-F102 (205W). These parts are suitable only for applications with lower thermal loads or where reduced power dissipation is acceptable.

All recommended substitutes maintain RoHS3 compliance and EAR99 ECCN classification consistent with the original part.

Frequently Asked Questions (FAQ)

Q: Can FCP22N60N-F102 be directly replaced with FCP22N60N?

A: Yes. FCP22N60N is a parametric equivalent with identical electrical specifications (600V Vdss, 22A Id, 165mOhm Rds On, 205W Pd) and TO-220-3 package compatibility. The only difference is packaging format (Tube). Both parts are classified as Obsolete.

Q: What is the primary difference between the main part and substitute parts?

A: The FCP22N60N-F102 is rated for 22A continuous drain current and 205W maximum power dissipation. Most substitute parts operate at 18A to 20A with significantly lower power dissipation (26W to 35W). IXTP24N65X2M is the exception, offering 24A current capability. Voltage ratings range from 600V to 650V across all substitutes.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed carry RoHS3 Compliant status, matching the compliance profile of FCP22N60N-F102.

Q: Which substitute part is recommended for new designs?

A: IPA60R180P7SXKSA1 (Infineon Technologies) and SIHA22N60AE-E3 (Vishay Siliconix) are both classified as Active and suitable for new designs. IXTP24N65X2M (IXYS) is also Active and offers higher current capability (24A). Parts classified as Not For New Designs should be reserved for legacy system support only.

Q: What is the significance of the TO-220-3 Full Pack designation?

A: TO-220-3 Full Pack indicates a fully isolated tab package variant, providing electrical isolation between the tab and the drain connection. This differs from standard TO-220-3 packages where the tab is internally connected to the drain. Verify application requirements before substituting between standard and full pack variants.

Q: Can IXTP24N65X2M be used as a direct replacement?

A: IXTP24N65X2M is functionally compatible but operates at 650V Vdss (versus 600V) and 24A (versus 22A). The lower Rds On (145mOhm versus 165mOhm) reduces conduction losses. The isolated tab package variant requires verification of PCB layout compatibility. This part is suitable for applications where higher current capability and improved thermal performance are beneficial.

Q: Why do some substitute parts have significantly lower power dissipation ratings?

A: Power dissipation ratings reflect thermal design and package characteristics. Parts such as STFH24N60M2 (35W) and AOTF190A60L (32W) are designed for lower thermal loads or different application classes. These parts are not suitable for applications requiring the full 205W dissipation capability of the FCP22N60N-F102.

Q: Are there any temperature range differences among substitute parts?

A: Most substitute parts operate across -55°C to 150°C, matching the FCP22N60N-F102. IPA60R180P7SXKSA1 operates across -40°C to 150°C, providing a narrower low-temperature range. Verify application requirements if operation below -40°C is necessary.

Q: What does "Not For New Designs" status mean?

A: Parts classified as Not For New Designs are typically in mature or declining production phases. Manufacturers may discontinue these parts or limit support. These parts are suitable for legacy system maintenance and repair but should not be selected for new product development. Active status parts are preferred for new designs.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message