FCP16N60N-F102 Equivalent & Substitute Parts

Part Overview

The FCP16N60N-F102 is an N-Channel 600V 16A MOSFET manufactured by onsemi in a Through Hole TO-220F package. This device is rated for 134.4W power dissipation and operates across a temperature range of -55°C to 150°C. The part is currently classified as Obsolete, necessitating identification of equivalent and substitute components for ongoing applications and new designs.

Substitute parts are required to maintain circuit functionality where the original FCP16N60N-F102 is no longer available or for applications requiring active product status and extended supply availability.

Key Parameters

Parameter	Value	Unit
FET Type	N-Channel	—
Drain to Source Voltage (Vdss)	600	V
Continuous Drain Current (Id) @ 25°C	16	A (Tc)
Rds On (Max) @ Id, Vgs	199	mOhm @ 8A, 10V
Gate Charge (Qg) (Max) @ Vgs	52.3	nC @ 10V
Power Dissipation (Max)	134.4	W (Tc)
Operating Temperature Range	-55 to 150	°C (TJ)
Mounting Type	Through Hole	—
Package / Case	TO-220-3 Full Pack	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution of the FCP16N60N-F102 is determined by the following critical parameters:

Mandatory Matching Criteria:

FET Type: N-Channel
Drain to Source Voltage (Vdss): 600V minimum
Continuous Drain Current (Id): 16A or greater
Mounting Type: Through Hole
Package Family: TO-220 variants (TO-220F, TO-220-3, TO-220FP, TO-220ABFP)
Operating Temperature Range: -55°C to 150°C minimum
RoHS3 Compliance

Performance Parameters for Compatibility:

Rds On (Max): 199 mOhm or lower (lower values indicate improved performance)
Gate Charge (Qg): 52.3 nC or lower (lower values reduce switching losses)
Power Dissipation: 134.4W or greater (thermal capability)
Vgs (Max): ±20V or ±30V (gate voltage tolerance)

Substitute parts are grouped based on whether they meet or exceed the electrical specifications of the original part while maintaining mechanical and thermal compatibility. Parts with higher current ratings, lower on-resistance, or improved thermal characteristics are suitable replacements. Voltage ratings above 600V provide additional design margin. Parts with active product status are prioritized for new designs.

Parameter Comparison

Parameter	FCP16N60N-F102	NTP185N60S5H	AOTF190A60L	IPA60R190P6XKSA1	IXFP22N65X2M	IXKP20N60C5M	SPA20N60C3XKSA1	STF20N65M5	STFU28N65M2
Manufacturer	onsemi	onsemi	Alpha & Omega	Infineon	IXYS	IXYS	Infineon	STMicroelectronics	STMicroelectronics
Vdss (V)	600	600	600	600	650	600	600	650	650
Id @ 25°C (A)	16	15	20	20.2	22	7.6	20.7	18	20
Rds On (Max) (mOhm)	199 @ 8A, 10V	185 @ 7.5A, 10V	190 @ 7.6A, 10V	190 @ 7.6A, 10V	145 @ 11A, 10V	200 @ 10A, 10V	190 @ 13.1A, 10V	190 @ 9A, 10V	180 @ 10A, 10V
Qg (Max) (nC)	52.3 @ 10V	25 @ 10V	34 @ 10V	37 @ 10V	37 @ 10V	30 @ 10V	114 @ 10V	45 @ 10V	35 @ 10V
Power Dissipation (W)	134.4	116	32	34	37	—	34.5	30	30
Operating Temp (°C)	-55 to 150	-55 to 150	-55 to 150	-55 to 150	-55 to 150	-55 to 150	-55 to 150	to 150	-55 to 150
Package	TO-220-3 Full Pack	TO-220-3	TO-220-3 Full Pack	TO-220-3 Full Pack	TO-220-3 Full Pack, Isolated Tab	TO-220-3 Full Pack	TO-220-3 Full Pack	TO-220-3 Full Pack	TO-220-3 Full Pack
Product Status	Obsolete	Not For New Designs	Not For New Designs	Active	Active	Active	Active	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

For Active Product Status and New Designs:

The following parts are classified as Active and suitable for new design implementations:

IPA60R190P6XKSA1 (Infineon CoolMOS™ P6): 600V, 20.2A, 190 mOhm, Active status. Provides equivalent voltage and current ratings with improved gate charge (37 nC) compared to the original part. Infineon CoolMOS™ technology offers established reliability in high-voltage switching applications.
IXFP22N65X2M (IXYS HiPerFET™ Ultra X2): 650V, 22A, 145 mOhm, Active status. Exceeds original specifications with higher voltage margin and superior on-resistance. Suitable for applications requiring enhanced performance and thermal efficiency.
IXKP20N60C5M (IXYS CoolMOS™): 600V, 7.6A, 200 mOhm, Active status. Meets voltage and on-resistance specifications but provides lower current rating. Appropriate for lower-current applications within the 600V class.
SPA20N60C3XKSA1 (Infineon CoolMOS™): 600V, 20.7A, 190 mOhm, Active status. Matches voltage and on-resistance with higher current capability. Gate charge of 114 nC is elevated; suitable for applications where switching frequency is not critical.
STF20N65M5 (STMicroelectronics MDmesh™ V): 650V, 18A, 190 mOhm, Active status. Provides voltage margin and equivalent on-resistance with lower gate charge (45 nC) for improved switching performance.
STFU28N65M2 (STMicroelectronics MDmesh™ M2): 650V, 20A, 180 mOhm, Active status. Exceeds current and voltage specifications with superior on-resistance (180 mOhm). Highest inventory availability (33,180 pcs). Recommended for high-volume production requiring extended supply assurance.

For Existing Applications (Maintenance and Repair):

NTP185N60S5H (onsemi SuperFET® V): 600V, 15A, 185 mOhm, Not For New Designs. Maintains onsemi platform continuity with lower gate charge (25 nC) for reduced switching losses. Suitable for direct replacement in existing onsemi-based designs.
AOTF190A60L (Alpha & Omega aMOS5™): 600V, 20A, 190 mOhm, Not For New Designs. Provides higher current rating with equivalent on-resistance. Appropriate for applications requiring increased current headroom.

All substitute parts maintain RoHS3 compliance and operate across the -55°C to 150°C temperature range. Package compatibility is confirmed for all TO-220 variants listed.

Frequently Asked Questions (FAQ)

Q: Can the FCP16N60N-F102 be directly replaced with any of the listed substitutes?

A: Direct replacement is possible for parts sharing identical package designations (TO-220-3 Full Pack). Mechanical fit is confirmed for all listed substitutes. Electrical compatibility requires verification that the substitute part meets or exceeds the original specifications for Vdss, Id, and Rds On. Thermal design review is recommended when substituting parts with different power dissipation ratings.

Q: What is the primary reason for substituting the FCP16N60N-F102?

A: The FCP16N60N-F102 is classified as Obsolete. Substitution is necessary to secure long-term supply availability and to transition to Active product status parts for new designs. Active parts offer extended manufacturer support and documented long-term availability.

Q: Which substitute part provides the best electrical performance?

A: The IXFP22N65X2M offers the lowest on-resistance (145 mOhm) and highest current rating (22A), providing superior electrical performance. The STFU28N65M2 offers the second-best on-resistance (180 mOhm) with the highest inventory availability and Active product status.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts are RoHS3 Compliant and REACH Unaffected, matching the environmental compliance of the original FCP16N60N-F102.

Q: What is the significance of gate charge (Qg) differences?

A: Gate charge affects switching speed and driver power requirements. Lower gate charge values (such as NTP185N60S5H at 25 nC) reduce switching losses and allow faster switching frequencies. Higher gate charge values (such as SPA20N60C3XKSA1 at 114 nC) require more driver current but do not affect DC performance. Selection depends on the switching frequency and driver capability of the application.

Q: Can I use a substitute with a higher voltage rating (650V instead of 600V)?

A: Yes. Higher voltage ratings provide additional design margin and do not degrade performance in 600V applications. Parts rated for 650V (STF20N65M5, STFU28N65M2, IXFP22N65X2M) are fully compatible with 600V circuit designs.

Q: What is the difference between TO-220F and TO-220-3 packages?

A: Both designations refer to the same three-lead Through Hole package with full-pack thermal tab. TO-220F and TO-220-3 Full Pack are mechanically and electrically equivalent. Some manufacturers use different nomenclature for identical physical packages.

Q: Which substitute part has the best supply availability?

A: The STFU28N65M2 has the highest inventory (33,180 pcs), followed by IPA60R190P6XKSA1 (34,400 pcs). Both parts are classified as Active and provide extended supply assurance for production applications.

Q: Is the isolated tab variant (IXFP22N65X2M) compatible with standard TO-220 mounting?

A: The IXFP22N65X2M features an isolated tab design, which is mechanically compatible with standard TO-220 mounting hardware. The isolated tab provides electrical isolation between the tab and the drain connection, beneficial in certain circuit topologies. Standard TO-220 mounting can accommodate this variant without modification.

Q: What thermal considerations apply when substituting parts with different power dissipation ratings?

A: The original FCP16N60N-F102 is rated for 134.4W power dissipation. Substitute parts with lower ratings (30W to 37W) indicate different thermal characteristics. Thermal design review is required to confirm that the substitute part's thermal resistance (Rθ) is acceptable for the application's heat dissipation requirements. Heatsink design may require adjustment based on the substitute part's thermal specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message