FCE17E09SN490 D-Sub 9-Position Receptacle Connector Equivalent & Substitute Parts

Part Overview

The FCE17E09SN490 is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This connector features female sockets, vertical through-hole mounting, and solder termination. The part is currently active in production with 1017 units in stock. D-Sub connectors of this configuration are widely used in industrial, telecommunications, and legacy computing applications where standardized 9-position signal connectivity is required. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Receptacle, Female Sockets
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole
Termination	Solder
Contact Type	Signal
Current Rating (Amps)	5A
Material Flammability Rating	UL94 V-0
Operating Temperature Range	-40°C ~ 85°C
Contact Finish	Gold
Shell Material, Finish	Steel, Tin Plated
Color	Black
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

Substitute parts for the FCE17E09SN490 are identified based on strict electrical and mechanical compatibility criteria. All substitute parts must satisfy the following core parameters:

Connector Style & Type: D-Sub receptacle with female sockets
Position Count & Layout: 9 positions in 2-row configuration, Shell Size 1 (DE, E)
Termination Method: Solder termination
Contact Type: Signal contacts
Flammability Rating: UL94 V-0 minimum
Current Capacity: Minimum 5A rating
Operating Temperature: Must encompass or exceed -40°C to 85°C range
Contact Finish: Gold plated
Mounting Configuration: Through-hole compatible

Substitute parts are grouped into two categories based on mounting configuration differences:

Category A - Panel Mount Variants (NorComp 172 Series): These parts feature panel mount through-hole capability with board-side or mating-side flange options. They are electrically and mechanically compatible with the FCE17E09SN490 but offer alternative mounting flange configurations.

Category B - Vertical Through-Hole Variants (TE Connectivity AMPLIMITE HDP-20 Series): These parts maintain the vertical through-hole mounting orientation identical to the main part, with unthreaded housing/shell flange design.

Parameter Comparison

Parameter	FCE17E09SN490 (Main)	172-009-283L001	172-009-283L011	172-009-283L021	172-009-283L031	205734-5	205734-7	5205734-7	5745183-1	5745183-2	5745183-3
Manufacturer	Amphenol ICC	NorComp Inc.	NorComp Inc.	NorComp Inc.	NorComp Inc.	TE Connectivity	TE Connectivity	TE Connectivity	TE Connectivity	TE Connectivity	TE Connectivity
Connector Type	Receptacle, Female	Receptacle, Female	Receptacle, Female	Receptacle, Female	Receptacle, Female	Receptacle, Female	Receptacle, Female	Receptacle, Female	Receptacle, Female	Receptacle, Female	Receptacle, Female
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Shell Size Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole	Panel Mount, Through Hole	Panel Mount, Through Hole	Panel Mount, Through Hole	Panel Mount, Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	6A	6A	6A	6A	6A	6A
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Operating Temperature	-40°C ~ 85°C	-50°C ~ 125°C	-50°C ~ 125°C	-50°C ~ 125°C	-50°C ~ 125°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold
Shell Material, Finish	Steel, Tin Plated	Steel, Nickel Plated	Steel, Nickel Plated	Steel, Nickel Plated	Steel, Nickel Plated	Steel, Yellow Chromate Plated Zinc	Steel, Yellow Chromate Plated Zinc	Steel, Yellow Chromate Plated Zinc	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated
Contact Material	Phosphor Bronze	Brass	Brass	Brass	Brass	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Dielectric Material	Thermoplastic, Glass Filled	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polyamide (PA), Nylon, Glass Filled	Polyamide (PA), Nylon, Glass Filled	Polyamide (PA), Nylon, Glass Filled	Polyamide (PA), Nylon, Glass Filled	Polyamide (PA), Nylon, Glass Filled	Polyamide (PA), Nylon, Glass Filled
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS non-compliant	RoHS non-compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All listed substitute parts maintain active production status and satisfy the core electrical and mechanical requirements for direct substitution with the FCE17E09SN490. Selection among substitute options is determined by specific application requirements and compliance mandates.

NorComp 172 Series (172-009-283L001, 172-009-283L011, 172-009-283L021, 172-009-283L031): These parts are suitable for applications requiring panel-mount through-hole configurations. All variants are ROHS3 compliant and operate across an extended temperature range (-50°C to 125°C). The primary distinction among these four parts is flange configuration: 172-009-283L001 features unthreaded housing flange, while 172-009-283L011, 172-009-283L021, and 172-009-283L031 feature board-side or mating-side 4-40 threaded flanges. Contact material is brass rather than phosphor bronze. Dielectric material is PBT rather than glass-filled thermoplastic.

TE Connectivity AMPLIMITE HDP-20 Series (205734-5, 205734-7, 5205734-7, 5745183-1, 5745183-2, 5745183-3): These parts maintain vertical through-hole mounting identical to the main part. Current rating is 6A, exceeding the 5A specification of the FCE17E09SN490. Operating temperature range extends to -55°C to 105°C. Parts 205734-5 and 205734-7 are RoHS non-compliant; 5205734-7, 5745183-1, 5745183-2, and 5745183-3 are RoHS compliant or ROHS3 compliant. Shell finish varies between yellow chromate plated zinc (205734 series) and tin plated (5745183 series). Contact material is phosphor bronze, matching the main part. Dielectric material is polyamide nylon glass-filled.

RoHS Compliance Consideration: For applications subject to RoHS directives, select from ROHS3-compliant variants: 172-009-283L001, 172-009-283L011, 172-009-283L021, 172-009-283L031, 5205734-7, 5745183-1, 5745183-2, or 5745183-3. Parts 205734-5 and 205734-7 are not RoHS compliant and are restricted in certain regulatory jurisdictions.

Temperature Range Consideration: Applications operating below -40°C or above 85°C require substitutes with extended temperature ratings. All listed substitutes exceed the original specification range.

Mounting Configuration Consideration: Applications requiring vertical through-hole mounting without panel-mount capability should select from the TE Connectivity AMPLIMITE HDP-20 series. Applications requiring panel-mount capability should select from the NorComp 172 series.

Frequently Asked Questions (FAQ)

Q: Can the NorComp 172 series parts be used as direct replacements for the FCE17E09SN490 in vertical through-hole applications?

A: NorComp 172 series parts feature panel-mount through-hole capability, which differs from the vertical through-hole mounting of the FCE17E09SN490. While electrically compatible, the flange configuration and mounting footprint differ. Application-specific PCB layout and mechanical mounting requirements must be evaluated before substitution.

Q: What is the difference between the four NorComp 172-009-283L variants?

A: The four variants differ only in flange configuration. 172-009-283L001 features unthreaded housing/shell flange. 172-009-283L011 and 172-009-283L021 feature board-side 4-40 threaded flanges. 172-009-283L031 features mating-side 4-40 threaded flange. All other electrical and mechanical parameters are identical.

Q: Are the TE Connectivity AMPLIMITE HDP-20 series parts pin-compatible with the FCE17E09SN490?

A: Yes. All AMPLIMITE HDP-20 variants maintain the 9-position, 2-row D-Sub configuration with Shell Size 1 (DE, E) layout. Pin assignment and contact spacing are identical to the FCE17E09SN490.

Q: What is the difference between 205734-5, 205734-7, and 5205734-7?

A: These parts are electrically and mechanically identical. The primary differences are packaging format (205734-5 and 205734-7 are supplied in bulk; 5205734-7 is supplied in tube) and RoHS compliance status (205734-5 and 205734-7 are RoHS non-compliant; 5205734-7 is RoHS compliant).

Q: What is the difference between 5745183-1, 5745183-2, and 5745183-3?

A: These parts are electrically and mechanically identical. All three are supplied in tube packaging and are ROHS3 compliant. Contact finish thickness specification differs: 5745183-1 and 5745183-3 do not specify thickness; 5745183-2 specifies flash thickness. REACH status varies: 5745183-1 and 5745183-3 are REACH unaffected; 5745183-2 status is vendor undefined.

Q: Can I substitute a part with higher current rating (6A) for the 5A-rated FCE17E09SN490?

A: Yes. A higher current rating indicates the substitute part can safely handle equal or greater current loads. The 6A-rated AMPLIMITE HDP-20 series parts are suitable for applications requiring the 5A specification of the FCE17E09SN490.

Q: Are there any compliance restrictions on using the 205734-5 or 205734-7 parts?

A: These parts are RoHS non-compliant. Applications subject to RoHS directives (EU Directive 2011/65/EU or equivalent) cannot use these parts. Select ROHS3-compliant alternatives for regulated applications.

Q: What is the difference between tin-plated and nickel-plated shell finishes?

A: Both finishes provide corrosion resistance and electrical conductivity. Tin plating (FCE17E09SN490, 5745183 series) offers superior solderability and lower contact resistance. Nickel plating (NorComp 172 series) provides enhanced corrosion resistance in harsh environments. Selection depends on application environment and assembly process requirements.

Q: Can I mix and match parts from different manufacturers in the same application?

A: Yes. All listed parts are mechanically and electrically compatible within the specified parameters. Mixed-manufacturer assemblies are permissible provided all parts meet the application's electrical, mechanical, and compliance requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message