FCE17E09SC65B D-Sub 9 Position Receptacle Equivalent & Substitute Parts

Part Overview

The FCE17E09SC65B is a 9 position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This connector features female sockets, right-angle mounting, and solder termination, designed for through-hole PCB applications. The part is currently active in production with 843 units in stock. Equivalent and substitute parts are identified based on matching connector topology, electrical ratings, mechanical dimensions, and termination compatibility to ensure direct functional replacement in circuit designs.

Substiute Parts

FCE17E09SC65B

Amphenol ICC (Commercial Products)In Stock: 937FCE17E09SC65B Datasheet

Current PartRFQ

5745988-6

TE Connectivity AMP ConnectorsIn Stock: 15755745988-6 Datasheet

SimilarRFQ

626-009-262-032

Mercury United Electronics, Inc.In Stock: 846626-009-262-032 Datasheet

SimilarRFQ

626-009-662-032

Mercury United Electronics, Inc.In Stock: 923626-009-662-032 Datasheet

SimilarRFQ

747836-6

TE Connectivity AMP ConnectorsIn Stock: 1095747836-6 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the FCE17E09SC65B are qualified based on the following critical parameters that must match or exceed the main part specifications:

Mandatory Matching Parameters:

• Connector Style: D-Sub
• Connector Type: Receptacle, Female Sockets
• Number of Positions: 9
• Number of Rows: 2
• Shell Size, Connector Layout: 1 (DE, E)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder

Electrical Compatibility Parameters:

• Current Rating: Equal to or greater than 5A
• Operating Temperature Range: Must encompass or exceed -40°C ~ 85°C
• Material Flammability Rating: UL94 V-0

Mechanical Compatibility Parameters:

• Shell Material: Steel construction
• Contact Finish: Gold plated
• Backset Spacing: Within tolerance of 0.590" (14.99mm)

Four substitute parts meet these criteria: 5745988-6 (TE Connectivity), 626-009-262-032 (Mercury United Electronics), 626-009-662-032 (Mercury United Electronics), and 747836-6 (TE Connectivity).

Parameter Comparison

Engineering Selection Recommendations

5745988-6 and 747836-6 (TE Connectivity AMPLIMITE HD-20 Series)

These parts provide direct functional equivalence to the FCE17E09SC65B with enhanced electrical performance. Both feature 6A current rating (exceeding the 5A requirement), extended operating temperature range (-55°C ~ 105°C), and ROHS3 compliance. The 747836-6 is packaged in tube format, while 5745988-6 is supplied in tray packaging. Both incorporate ground strap features and mating-side female screwlock flanges. These parts are suitable for applications requiring higher current capacity or extended temperature operation.

626-009-262-032 and 626-009-662-032 (Mercury United Electronics 626 Series)

These parts maintain full D-Sub 9 position receptacle compatibility with board edge and through-hole mounting options. Both feature ROHS3 compliance and board lock functionality with shielding. The 626-009-662-032 provides 30.0µin gold contact finish thickness, matching the thickness of TE Connectivity alternatives. Current rating is specified at 3A per contact, which is lower than the main part specification. These parts are suitable for applications where board edge mounting is required or where shielding is necessary.

RoHS and Compliance Considerations

The FCE17E09SC65B is RoHS Compliant. Substitute parts 5745988-6, 626-009-262-032, and 626-009-662-032 are ROHS3 Compliant, indicating enhanced environmental compliance. The 747836-6 carries "Not applicable" RoHS status but is REACH Affected. All parts maintain UL94 V-0 flammability rating and MSL 1 (Unlimited) moisture sensitivity level.

Frequently Asked Questions (FAQ)

Q: Can 626-009-262-032 or 626-009-662-032 be used as direct replacements for FCE17E09SC65B?

A: These Mercury United Electronics parts are mechanically and electrically compatible as D-Sub 9 position receptacles with solder termination. However, the current rating is specified at 3A per contact, which is lower than the FCE17E09SC65B 5A rating. Backset spacing differs slightly (0.584" versus 0.590"), and shell finish is nickel plated rather than tin plated. These parts are suitable for applications within their 3A per contact specification and where board edge mounting capability is beneficial.

Q: What is the difference between 5745988-6 and 747836-6?

A: Both are TE Connectivity AMPLIMITE HD-20 series 9 position D-Sub receptacles with identical electrical and mechanical specifications: 6A current rating, -55°C ~ 105°C operating temperature, and 0.590" backset spacing. The primary difference is packaging: 5745988-6 is supplied in tray format, while 747836-6 is supplied in tube format. The 747836-6 includes board lock feature in addition to ground strap, whereas 5745988-6 features ground strap only.

Q: Are the TE Connectivity parts (5745988-6 and 747836-6) suitable for all applications using FCE17E09SC65B?

A: Yes, for applications within the specified operating parameters. Both TE Connectivity parts exceed the FCE17E09SC65B electrical specifications with 6A current rating versus 5A, and extended temperature range (-55°C ~ 105°C versus -40°C ~ 85°C). Both maintain UL94 V-0 flammability rating and MSL 1 moisture sensitivity. The higher contact finish thickness (30.0µin versus 15.0µin) provides enhanced durability. These parts are direct functional equivalents with superior performance margins.

Q: What packaging options are available for these substitute parts?

A: FCE17E09SC65B is supplied in standard packaging (not specified). Substitute parts are available in the following formats: 5745988-6 (Tray), 626-009-262-032 (Bulk), 626-009-662-032 (Bulk), and 747836-6 (Tube). Packaging selection should be based on procurement volume and handling requirements for production assembly.

Q: Do all substitute parts maintain the same flange feature as the main part?

A: No. The FCE17E09SC65B features board-side M3 flange. Substitute parts feature different flange configurations: 5745988-6 and 747836-6 feature mating-side female screwlock (4-40) flanges; 626-009-262-032 and 626-009-662-032 feature housing/shell (4-40) flanges with board lock capability. These differences affect mounting methodology and should be evaluated against PCB design requirements.

Q: Which substitute part has the highest contact finish thickness?

A: The 5745988-6, 626-009-662-032, and 747836-6 all feature 30.0µin (0.76µm) gold contact finish thickness, which is double the FCE17E09SC65B specification of 15.0µin (0.38µm). The 626-009-262-032 features flash gold finish thickness. Higher contact finish thickness provides enhanced wear resistance and contact durability.