FCE17E09SB68B D-Sub 9 Position Receptacle Connector Equivalent & Substitute Parts

Part Overview

The FCE17E09SB68B is a 9 Position D-Sub Receptacle connector manufactured by Amphenol ICC (Commercial Products). This connector features female sockets in a right-angle, through-hole configuration with board-side M3 flange mounting and solder termination. The part is currently active in production with 844 units in stock inventory.

D-Sub receptacle connectors are essential interface components in electronic systems requiring standardized signal transmission and mechanical coupling. Equivalent and substitute parts become necessary when addressing supply chain constraints, inventory optimization, or specific application requirements such as enhanced temperature ratings or alternative packaging formats.

Substiute Parts

FCE17E09SB68B

Amphenol ICC (Commercial Products)In Stock: 891FCE17E09SB68B Datasheet

Current PartRFQ

5745438-1

TE Connectivity AMP ConnectorsIn Stock: 8215745438-1 Datasheet

SimilarRFQ

5745438-4

TE Connectivity AMP ConnectorsIn Stock: 16385745438-4 Datasheet

SimilarRFQ

D09S13A6RX12LF

Amphenol ICC (FCI)In Stock: 1454D09S13A6RX12LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FCE17E09SB68B is determined by strict alignment of the following critical parameters:

Primary Compatibility Criteria:

• Connector Style: D-Sub (mandatory)
• Connector Type: Receptacle, Female Sockets (mandatory)
• Number of Positions: 9 (mandatory)
• Number of Rows: 2 (mandatory)
• Shell Size, Connector Layout: 1 (DE, E) (mandatory)
• Mounting Type: Through Hole, Right Angle (mandatory)
• Termination: Solder (mandatory)
• Contact Material: Phosphor Bronze (mandatory)
• Material Flammability Rating: UL94 V-0 (mandatory)

Secondary Compatibility Parameters:

• Shell Material, Finish: Steel with plating (Tin or Nickel acceptable)
• Contact Finish: Gold (required)
• RoHS Compliance Status: RoHS or ROHS3 Compliant (acceptable)
• Moisture Sensitivity Level: 1 (Unlimited) (required)

Allowable Variations:

• Current Rating: 5A or higher (6A acceptable)
• Operating Temperature Range: Equal to or exceeding -40°C ~ 85°C
• Contact Finish Thickness: Variations permitted (Flash, 15.0µin, 30.0µin)
• Backset Spacing: Minor variations within connector geometry tolerance
• Flange Feature: Board Side or Mating Side configurations acceptable
• Packaging Format: Tray, Bulk, or Cut Tape formats acceptable

The three substitute parts listed (5745438-1, 5745438-4, D09S13A6RX12LF) meet all primary compatibility criteria and fall within allowable secondary parameter variations.

Parameter Comparison

Engineering Selection Recommendations

5745438-1 (TE Connectivity AMPLIMITE HDP-20 Series, Tray Packaging)

This substitute meets all primary compatibility requirements. The TE Connectivity part offers enhanced current rating (6A versus 5A) and extended operating temperature range (-55°C ~ 105°C versus -40°C ~ 85°C). ROHS3 compliance status indicates adherence to current regulatory standards. Backset spacing variation (0.454" versus 0.405") is within acceptable connector geometry tolerance. Mating-side flange configuration with standard 4-40 screws differs from board-side M3 mounting but maintains mechanical compatibility. Tray packaging format supports automated assembly processes. Inventory availability is 807 units.

5745438-4 (TE Connectivity AMPLIMITE HDP-20 Series, Bulk Packaging)

This substitute is functionally equivalent to 5745438-1 with identical electrical and mechanical specifications. RoHS compliance is confirmed. The primary distinction is bulk packaging format, which accommodates high-volume production environments. Highest inventory availability at 1531 units supports extended supply chain requirements. Backset spacing and flange configuration match 5745438-1 specifications.

D09S13A6RX12LF (Amphenol FCI Delta D Series, Cut Tape Packaging)

This substitute maintains all primary compatibility criteria with Amphenol ICC (FCI) manufacturing. Solder Paste termination variant accommodates reflow soldering processes in surface-mount assembly workflows. Nickel plating on steel shell provides alternative corrosion resistance compared to tin plating. Contact finish thickness is 30.0µin (0.76µm), exceeding the main part specification. Voltage rating of 300V exceeds application requirements. Operating temperature minimum of -55°C extends low-temperature performance. Cut Tape packaging format supports component-level inventory management. Inventory availability is 1419 units.

All three substitutes maintain RoHS compliance and MSL 1 (Unlimited) moisture sensitivity ratings, ensuring compatibility with standard manufacturing and storage protocols.

Frequently Asked Questions (FAQ)

Q: Can 5745438-1 or 5745438-4 be used as direct replacements for FCE17E09SB68B in existing PCB designs?

A: Both TE Connectivity parts meet all primary electrical and mechanical compatibility criteria. However, backset spacing variation (0.454" versus 0.405") and flange configuration differences (mating-side with 4-40 screws versus board-side M3) require PCB layout verification. Mechanical mounting hole patterns must be confirmed before implementation.

Q: What is the significance of the Solder Paste termination on D09S13A6RX12LF compared to standard Solder termination?

A: Solder Paste termination is optimized for reflow soldering processes in automated surface-mount assembly. Standard Solder termination accommodates wave soldering or manual soldering methods. Selection depends on manufacturing process capability. Both achieve equivalent electrical performance.

Q: Are there temperature rating implications when substituting FCE17E09SB68B with parts rated to -55°C ~ 105°C?

A: The substitute parts (5745438-1 and 5745438-4) offer extended temperature range capability. This provides design margin for applications operating near the original -40°C ~ 85°C specification. No performance degradation occurs when operating within the original temperature range. Extended ratings do not impose additional requirements on the application.

Q: How do packaging format differences (Tray, Bulk, Cut Tape) affect component selection?

A: Packaging format selection is determined by manufacturing workflow and inventory management strategy. Tray packaging (5745438-1) supports automated pick-and-place assembly. Bulk packaging (5745438-4) accommodates high-volume production with manual or semi-automated handling. Cut Tape packaging (D09S13A6RX12LF) supports component-level inventory control and lower-volume assembly. Electrical and mechanical performance is identical across all packaging formats.

Q: What is the impact of contact finish thickness variations (15.0µin, Flash, 30.0µin)?

A: Contact finish thickness variations do not affect electrical performance or mechanical compatibility. All specified thicknesses provide adequate gold plating for signal integrity and corrosion resistance. Thicker plating (30.0µin on D09S13A6RX12LF) offers extended contact life in high-cycle mating applications. Selection is based on application duty cycle requirements.

Q: Are all substitute parts RoHS compliant?

A: Yes. FCE17E09SB68B is RoHS Compliant. 5745438-1 is ROHS3 Compliant (current regulatory standard). 5745438-4 and D09S13A6RX12LF are RoHS Compliant. All parts meet environmental compliance requirements for regulated markets.

Q: Can D09S13A6RX12LF be used in applications requiring the original -40°C ~ 85°C operating range?

A: D09S13A6RX12LF specifies -55°C minimum operating temperature without upper limit documentation. This part is suitable for applications requiring -40°C ~ 85°C operation. However, upper temperature limit confirmation is required before final selection for applications approaching 85°C.

Q: What inventory considerations apply when selecting between the three substitutes?

A: 5745438-1 (Tray): 807 units available. 5745438-4 (Bulk): 1531 units available. D09S13A6RX12LF (Cut Tape): 1419 units available. Selection based on immediate availability and supply chain continuity requirements. Higher inventory levels (5745438-4 and D09S13A6RX12LF) support extended production schedules.