FCE17E09SB4EB D-Sub 9 Position Receptacle Equivalent & Substitute Parts

Part Overview

The FCE17E09SB4EB is a 9 position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This right-angle, through-hole solder termination connector features female sockets with a DE/E shell size (1) and is designed for signal applications. The connector is actively produced and RoHS compliant, making it suitable for modern electronic assemblies requiring D-Sub connectivity in space-constrained applications.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct replacement in circuit designs without functional degradation.

Key Parameters

Parameter	FCE17E09SB4EB
Connector Style	D-Sub
Connector Type	Receptacle, Female Sockets
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A
Material Flammability Rating	UL94 V-0
Operating Temperature	-40°C ~ 85°C
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

Substitute parts for the FCE17E09SB4EB are grouped based on strict alignment of the following critical parameters:

Primary Substitution Criteria:

Connector Style: D-Sub
Connector Type: Receptacle, Female Sockets
Number of Positions: 9
Number of Rows: 2
Shell Size, Connector Layout: 1 (DE, E)
Mounting Type: Through Hole, Right Angle
Termination: Solder (or Solder Paste for surface mount variants)
Material Flammability Rating: UL94 V-0
Contact Type: Signal

Secondary Compatibility Parameters:

Current Rating: 5A or higher
Operating Temperature Range: Must encompass or exceed -40°C ~ 85°C
RoHS Compliance: RoHS Compliant or ROHS3 Compliant

Substitutes are organized by manufacturer and series. Parts meeting all primary criteria and maintaining compatibility across secondary parameters are classified as direct equivalents. Variations in backset spacing, flange features, shell finish, and contact finish thickness are noted but do not preclude substitution when mechanical and electrical requirements align.

Parameter Comparison

Parameter	FCE17E09SB4EB	182-009-213R531	5745438-1	5745438-4	D09S13A4GL00LF	D09S13A4GX00LF	D09S13A6GX00LF	D09S13A6RX12LF
Manufacturer	Amphenol ICC (Commercial Products)	NorComp Inc.	TE Connectivity AMP Connectors	TE Connectivity AMP Connectors	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)
Connector Style	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	9	9	9	9	9	9	9	9
Number of Rows	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Panel Mount, Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder Paste
Current Rating (Amps)	5A	5A	6A	6A	5A per Contact	5A per Contact	5A per Contact	5A per Contact
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Operating Temperature	-40°C ~ 85°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant
Contact Type	Signal	Signal	Signal	Signal	Signal	Signal	Signal	Signal
Backset Spacing	0.405" (10.29mm)	0.318" (8.08mm)	0.454" (11.53mm)	0.454" (11.53mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold or Gold, GXT™	Gold
Contact Material	Phosphor Bronze	Not Specified	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze

Engineering Selection Recommendations

Direct Substitutes (Primary Selection):

The following parts are classified as direct substitutes for the FCE17E09SB4EB based on alignment of all primary substitution criteria and compatibility across secondary parameters:

D09S13A4GX00LF (Amphenol ICC FCI, Delta D Series): Meets all primary criteria with extended operating temperature range (-55°C ~ 125°C) and ROHS3 compliance. Backset spacing of 0.409" (10.40mm) is within acceptable tolerance of the main part. Current rating of 5A per contact matches the main part specification.
D09S13A4GL00LF (Amphenol ICC FCI, Delta D Series): Equivalent to D09S13A4GX00LF with identical electrical and mechanical specifications. ROHS3 compliant with extended temperature range.
D09S13A6GX00LF (Amphenol ICC FCI, Delta D Series): Meets all primary criteria with enhanced contact finish thickness (30.0µin / 0.76µm) compared to the main part (15.0µin / 0.38µm). Extended operating temperature range and RoHS compliance confirmed.

Secondary Substitutes (Conditional Selection):

5745438-1 (TE Connectivity AMP Connectors, AMPLIMITE HDP-20 Series): Meets all primary criteria with current rating of 6A (exceeds main part specification of 5A). Extended operating temperature range (-55°C ~ 105°C) and ROHS3 compliance. Backset spacing of 0.454" (11.53mm) represents a 1.2% deviation from the main part; mechanical fit verification is required for board-level integration.
5745438-4 (TE Connectivity AMP Connectors, AMPLIMITE HDP-20 Series): Identical to 5745438-1 with RoHS compliance (non-ROHS3). Bulk packaging differs from tray packaging of the main part.
182-009-213R531 (NorComp Inc., 182 Series): Meets all primary criteria with extended operating temperature range (-55°C ~ 105°C) and ROHS3 compliance. Backset spacing of 0.318" (8.08mm) represents a 21.5% reduction from the main part; mechanical fit verification is required before selection.

Termination Variant:

D09S13A6RX12LF (Amphenol ICC FCI, Delta D Series): Solder paste termination variant suitable for surface mount assembly processes. Meets all primary criteria with 5A per contact current rating and RoHS compliance. Operating temperature specification limited to -55°C (lower bound only); full upper temperature limit not provided.

Parts Not Recommended for Direct Substitution:

D09S13A4PA00LF: Lacks board lock and mounting bracket features specified in comparable Delta D variants. No features listed in input data.

All substitute parts maintain UL94 V-0 flammability rating and signal contact type. Compliance certifications (RoHS, ROHS3, REACH) are confirmed for all listed substitutes.

Frequently Asked Questions (FAQ)

Q: Can D09S13A4GX00LF replace FCE17E09SB4EB in all applications?

A: D09S13A4GX00LF meets all primary substitution criteria (9 position, D-Sub receptacle, female sockets, DE/E shell, through-hole right-angle, solder termination, 5A current rating, UL94 V-0). The extended operating temperature range (-55°C ~ 125°C) encompasses the main part specification (-40°C ~ 85°C). Backset spacing of 0.409" (10.40mm) differs from the main part (0.405" / 10.29mm) by 0.4mm; verify mechanical fit with PCB layout before final selection.

Q: What is the significance of backset spacing differences?

A: Backset spacing defines the distance from the mounting flange to the rear of the connector body. Variations affect PCB clearance and component placement. The main part FCE17E09SB4EB specifies 0.405" (10.29mm). Substitute parts with 0.409" (10.40mm) spacing (Delta D series) represent a 0.4mm increase; parts with 0.318" (8.08mm) spacing (NorComp 182 series) represent a 2.1mm decrease. Verify PCB design accommodates the selected spacing before assembly.

Q: Are TE Connectivity 5745438-1 and 5745438-4 interchangeable?

A: Both parts are electrically and mechanically equivalent, with identical specifications for connector type, positions, shell size, mounting, termination, current rating (6A), and operating temperature (-55°C ~ 105°C). The primary difference is packaging: 5745438-1 is supplied in tray packaging, while 5745438-4 is supplied in bulk packaging. RoHS compliance status differs (ROHS3 for 5745438-1, RoHS for 5745438-4). Select based on packaging requirements and compliance specifications for your application.

Q: What does "solder paste" termination mean for D09S13A6RX12LF?

A: Solder paste termination indicates the connector is designed for reflow soldering processes used in surface mount assembly. The connector is supplied with solder paste pre-applied to the termination pads. This variant is suitable for automated assembly lines using pick-and-place and reflow equipment. The main part FCE17E09SB4EB uses standard solder termination for manual or wave soldering processes. Select D09S13A6RX12LF only if your manufacturing process uses reflow soldering.

Q: How do I verify RoHS compliance for my application?

A: All listed substitute parts carry either RoHS Compliant or ROHS3 Compliant status. RoHS Compliant indicates compliance with the original Restriction of Hazardous Substances Directive. ROHS3 Compliant indicates compliance with the updated directive (2011/65/EU). Both certifications restrict lead, cadmium, mercury, hexavalent chromium, and brominated flame retardants. Verify your application's regulatory requirements (EU, China, or other regional standards) and select parts with the appropriate certification level.

Q: Can I use D09S13A4PA00LF as a substitute?

A: D09S13A4PA00LF meets the core electrical and mechanical criteria (9 position, D-Sub receptacle, female sockets, DE/E shell, through-hole right-angle, solder termination, 5A per contact, UL94 V-0, RoHS compliant). However, this variant lacks board lock and mounting bracket features present in the main part and other Delta D variants. If your application requires board lock or mounting brackets for mechanical stability, select D09S13A4GX00LF or D09S13A4GL00LF instead.

Q: What is the difference between contact finish "Flash" and "15.0µin (0.38µm)"?

A: Contact finish thickness specifies the gold plating depth on the contact surface. The main part FCE17E09SB4EB specifies 15.0µin (0.38µm) of gold plating. "Flash" indicates a minimal gold coating applied for corrosion protection without specifying exact thickness. Flash plating is typically thinner than 15.0µin and is suitable for applications with moderate contact cycling. For applications requiring enhanced durability and contact life, select parts with specified thickness (15.0µin or higher). D09S13A6GX00LF and D09S13A6RX12LF offer 30.0µin (0.76µm) thickness for extended contact life.

Q: Is the NorComp 182-009-213R531 suitable for my application?

A: 182-009-213R531 meets all primary substitution criteria with 5A current rating and UL94 V-0 flammability rating. Extended operating temperature range (-55°C ~ 105°C) exceeds the main part specification. However, backset spacing of 0.318" (8.08mm) is significantly shorter than the main part (0.405" / 10.29mm), representing a 2.1mm reduction. This spacing difference may affect PCB layout and component clearance. Verify mechanical compatibility with your PCB design before selection. The part also includes panel mount capability in addition to through-hole mounting.

Q: Which substitute offers the best contact durability?

A: D09S13A6GX00LF and D09S13A6RX12LF both feature enhanced contact finish thickness of 30.0µin (0.76µm), compared to the main part's 15.0µin (0.38µm) and other substitutes' flash plating. The thicker gold plating provides improved resistance to wear and corrosion during repeated mating cycles. Select D09S13A6GX00LF for standard solder termination applications or D09S13A6RX12LF for reflow soldering processes if contact durability is a critical requirement.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message