FCE17E09SB2EB D-Sub Receptacle Connector - Equivalent & Substitute Parts

Part Overview

The FCE17E09SB2EB is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder connector features female sockets in a DE/E shell size configuration. The part is currently active in production with 719 units in stock. Equivalent and substitute parts are identified when design requirements, supply chain constraints, or application-specific needs necessitate alternative sourcing options while maintaining electrical and mechanical compatibility.

Substiute Parts

FCE17E09SB2EB

Amphenol ICC (Commercial Products)In Stock: 809FCE17E09SB2EB Datasheet

Current PartRFQ

5745438-1

TE Connectivity AMP ConnectorsIn Stock: 8215745438-1 Datasheet

SimilarRFQ

5745438-4

TE Connectivity AMP ConnectorsIn Stock: 16385745438-4 Datasheet

SimilarRFQ

D09S13A6RX12LF

Amphenol ICC (FCI)In Stock: 1454D09S13A6RX12LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FCE17E09SB2EB is determined by the following critical parameters:

• Connector Configuration: 9-position D-Sub receptacle, female sockets, DE/E shell size
• Mounting Orientation: Through-hole, right-angle configuration
• Termination Method: Solder attachment
• Electrical Performance: Current rating and operating temperature range
• Material Compliance: UL94 V-0 flammability rating and RoHS compliance status
• Contact System: Gold-plated phosphor bronze contacts

The three identified substitute parts (5745438-1, 5745438-4, and D09S13A6RX12LF) share the core connector geometry, position count, shell size, and mounting type. Variations exist in current rating capacity, operating temperature range, backset spacing, flange design, and contact finish thickness. These differences are documented to enable informed selection based on specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts maintain active product status and meet the core functional requirements of the FCE17E09SB2EB. Selection criteria are based on the following factors:

5745438-1 and 5745438-4 (TE Connectivity AMPLIMITE HDP-20 Series)

These parts share identical electrical and mechanical specifications with the exception of backset spacing (0.454" versus 0.405") and flange design. Both offer enhanced current rating (6A versus 5A) and extended operating temperature range (-55°C to 105°C versus -40°C to 85°C). The 5745438-1 is packaged in trays with flash gold contact finish, while 5745438-4 is supplied in bulk. Both achieve ROHS3 or RoHS compliance. Backset spacing variation requires PCB layout verification before substitution.

D09S13A6RX12LF (Amphenol ICC Delta D Series)

This part utilizes solder paste termination rather than standard solder, making it suitable for automated assembly processes. It features nickel-plated steel shell finish and thicker gold contact plating (30.0µin). The backset spacing (0.409") is closer to the original part. Operating temperature specification is limited to -55°C maximum. This part is appropriate for high-volume manufacturing environments with solder paste reflow capability.

Frequently Asked Questions (FAQ)

Q: Can 5745438-1 or 5745438-4 be used as direct replacements for FCE17E09SB2EB?

A: Both parts share the same 9-position DE/E shell size, through-hole right-angle configuration, and solder termination. However, backset spacing differs (0.454" versus 0.405"), requiring verification that PCB pad layouts accommodate this 0.049" difference. Current rating and operating temperature are superior in the TE Connectivity parts.

Q: What is the significance of the backset spacing variation?

A: Backset spacing defines the distance from the connector mounting face to the rear contact plane. Variations of 0.049" between parts may require PCB redesign or mechanical accommodation. Verify mounting hole alignment and contact depth requirements before substitution.

Q: Why does D09S13A6RX12LF specify solder paste termination?

A: Solder paste termination is designed for reflow soldering processes used in automated PCB assembly. This differs from standard solder termination, which accommodates wave soldering or manual soldering. Equipment and process compatibility must be confirmed.

Q: Are all substitute parts RoHS compliant?

A: Yes. FCE17E09SB2EB is RoHS Compliant. 5745438-1 is ROHS3 Compliant. 5745438-4 and D09S13A6RX12LF are RoHS Compliant. All meet regulatory requirements for restricted substance elimination.

Q: What is the difference between tin-plated and nickel-plated shell finishes?

A: FCE17E09SB2EB and the TE Connectivity parts feature tin-plated steel shells. D09S13A6RX12LF uses nickel-plated steel. Nickel plating provides enhanced corrosion resistance in harsh environments. Shell finish selection depends on application environment and mating connector compatibility.

Q: Can these parts be intermixed in the same assembly?

A: Mechanical and electrical compatibility exists among all four parts for the connector interface itself. However, backset spacing and flange design variations may prevent simultaneous use on the same PCB without layout modifications. Verify mechanical fit and electrical performance requirements for your specific application.