Request Quote
(Ships tomorrow)
FCE17E09SA4DB D-Sub Receptacle 9-Position Equivalent & Substitute Parts
Part Overview
The FCE17E09SA4DB is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This right-angle, through-hole solder-terminated connector features female sockets in a DE/E shell size configuration. The connector is classified as Active product status with 1058 units in current inventory. D-Sub receptacle connectors serve as mating interfaces for signal transmission in industrial, telecommunications, and computing applications. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, ensuring functional interchangeability within defined application constraints.
Substiute Parts
Key Parameters
| Parameter | Value | Criticality for Substitution |
|---|---|---|
| Connector Type | Receptacle, Female Sockets | Critical |
| Number of Positions | 9 | Critical |
| Shell Size, Connector Layout | 1 (DE, E) | Critical |
| Mounting Type | Through Hole, Right Angle | Critical |
| Termination | Solder | Critical |
| Current Rating (Amps) | 5A | High |
| Backset Spacing | 0.318" (8.08mm) | Critical |
| Operating Temperature | -40°C ~ 85°C | High |
| Material Flammability Rating | UL94 V-0 | High |
| RoHS Status | RoHS Compliant | High |
Substitute Part Grouping Explanation
Substitute parts are classified into two categories based on parametric alignment with FCE17E09SA4DB:
Parametric Equivalent (Direct Substitution): Parts matching all critical parameters including connector type (receptacle, female sockets), position count (9), shell size (DE/E), mounting configuration (through-hole right-angle), and termination method (solder). Current rating, operating temperature range, and compliance certifications must remain within or exceed the original specification.
Similar Parts (Conditional Substitution): Parts sharing the same critical mechanical and electrical parameters but differing in secondary attributes such as contact finish thickness, flange feature design, shell material finish, or dielectric material composition. These parts maintain functional compatibility for the core 9-position D-Sub receptacle application but may require validation for specific environmental or performance requirements.
Key Substitution Parameters:
- Connector type and gender (receptacle with female sockets)
- Position count and row configuration (9 positions, 2 rows)
- Shell size designation (DE/E, Size 1)
- Mounting orientation (right-angle through-hole)
- Solder termination capability
- Backset spacing tolerance (0.318" ± tolerance)
- Current capacity (minimum 5A)
- Flammability compliance (UL94 V-0)
Parameter Comparison
| Parameter | FCE17E09SA4DB | FCE17E09SA44B | 09681535611 | 09681535612 | 09681535613 | 182-009-213R161 | 182-009-213R171 |
|---|---|---|---|---|---|---|---|
| Manufacturer | Amphenol ICC | Amphenol ICC | HARTING | HARTING | HARTING | NorComp Inc. | NorComp Inc. |
| Connector Type | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets |
| Number of Positions | 9 | 9 | 9 | 9 | 9 | 9 | 9 |
| Shell Size | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) |
| Mounting Type | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Panel Mount, Through Hole, Right Angle | Panel Mount, Through Hole, Right Angle |
| Termination | Solder | Solder | Solder | Solder | Solder | Solder | Solder |
| Current Rating (Amps) | 5A | 5A | 6.5A | 6.5A | 6.5A | 5A | 5A |
| Backset Spacing | 0.318" (8.08mm) | 0.318" (8.08mm) | 0.318" (8.08mm) | 0.318" (8.08mm) | 0.318" (8.08mm) | 0.318" (8.08mm) | 0.318" (8.08mm) |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C | -55°C ~ 125°C | -55°C ~ 125°C | -55°C ~ 125°C | -55°C ~ 105°C | -55°C ~ 105°C |
| Material Flammability Rating | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 |
| Contact Finish | Gold | Gold | Gold or Gold-Palladium | Gold or Gold-Palladium | Gold or Gold-Palladium | Gold | Gold |
| Shell Material Finish | Steel, Tin Plated | Steel, Tin Plated | Steel | Steel | Steel | Steel, Nickel Plated | Steel, Nickel Plated |
| RoHS Status | RoHS Compliant | RoHS Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant |
| Moisture Sensitivity Level | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | Not Applicable | Not Applicable |
Engineering Selection Recommendations
FCE17E09SA44B (Amphenol ICC): This part qualifies as a parametric equivalent to FCE17E09SA4DB. Both parts share identical specifications across all critical parameters: 9-position receptacle configuration, DE/E shell size, through-hole right-angle mounting, solder termination, 5A current rating, and -40°C to 85°C operating temperature range. Both maintain RoHS Compliance and UL94 V-0 flammability rating. The FCE17E09SA44B provides 1101 units in inventory, offering availability advantage. Selection of this part requires no design modification or validation beyond standard procurement verification.
HARTING 09681535611, 09681535612, 09681535613, 09681537611, 09681537612, 09681537613: These HARTING parts maintain functional compatibility with FCE17E09SA4DB across core mechanical and electrical parameters. All share 9-position receptacle configuration, DE/E shell size, through-hole right-angle mounting, and solder termination. HARTING parts provide enhanced current rating (6.5A versus 5A) and extended operating temperature range (-55°C to 125°C versus -40°C to 85°C). Differences exist in flange feature design (M3 threaded versus 4-40 threaded versus female screwlock), contact finish thickness (30.0µin versus 15.0µin), and dielectric material composition (PBT/Polyester glass-filled versus thermoplastic glass-filled). ROHS3 Compliance and UL94 V-0 rating are maintained. These parts are suitable for applications requiring extended temperature performance or higher current capacity.
NorComp Inc. 182-009-213R161 and 182-009-213R171: NorComp parts maintain 9-position receptacle configuration, DE/E shell size, through-hole right-angle mounting, and solder termination. Both provide 5A current rating matching the original specification. Operating temperature range extends to -55°C to 105°C. Flange feature differs: 182-009-213R161 uses unthreaded housing flange while 182-009-213R171 uses 4-40 threaded flange. Shell material finish is nickel-plated steel versus tin-plated steel. Contact finish is gold with flash thickness. Both parts include ground strap feature and maintain ROHS3 Compliance and UL94 V-0 rating. These parts are suitable for applications requiring panel-mount capability or ground strap integration.
Frequently Asked Questions (FAQ)
Q: Can FCE17E09SA44B directly replace FCE17E09SA4DB without PCB modification?
A: Yes. FCE17E09SA44B is a parametric equivalent with identical mechanical footprint, electrical ratings, and termination method. No PCB layout modification is required. Both parts maintain the same 0.318" (8.08mm) backset spacing and through-hole solder pad configuration.
Q: What is the primary difference between Amphenol ICC and HARTING 9-position receptacles?
A: The primary differences are current rating (5A for Amphenol versus 6.5A for HARTING), operating temperature range (-40°C to 85°C for Amphenol versus -55°C to 125°C for HARTING), and contact finish thickness (15.0µin for Amphenol versus 30.0µin for HARTING). Mechanical compatibility remains identical for the 9-position DE/E configuration.
Q: Are NorComp 182-009-213R161 and 182-009-213R171 interchangeable?
A: Both NorComp parts share identical electrical and core mechanical specifications. The primary difference is flange feature: 182-009-213R161 has unthreaded housing flange while 182-009-213R171 has 4-40 threaded flange. Selection depends on mounting hardware availability and panel design requirements.
Q: Does shell material finish (tin-plated versus nickel-plated) affect electrical performance?
A: Shell material finish does not affect electrical signal integrity for this connector category. Both tin-plated and nickel-plated finishes provide adequate corrosion resistance. Selection depends on environmental exposure and specific application requirements for corrosion resistance duration.
Q: Can HARTING parts with 6.5A rating be used in applications designed for 5A?
A: Yes. HARTING parts with 6.5A rating exceed the 5A requirement and provide design margin. However, the application circuit design must remain unchanged. The higher current rating does not modify connector mechanical compatibility or electrical signal characteristics.
Q: What does "Contact Finish Thickness: Flash" mean for NorComp parts?
A: Flash thickness indicates a minimal gold plating layer applied to the contact surface. This provides corrosion protection and contact reliability while minimizing material cost. Flash thickness is suitable for signal-level applications and meets industry standards for D-Sub connectors.
Q: Are all listed substitute parts RoHS compliant?
A: Yes. All substitute parts listed maintain either RoHS Compliance (Amphenol ICC) or ROHS3 Compliance (HARTING and NorComp). All parts are suitable for applications requiring RoHS compliance certification.
Q: What is the significance of "Board Lock" feature on HARTING parts?
A: Board Lock is a mechanical feature that provides positive retention of the connector to the PCB during assembly and operation. This feature does not affect electrical performance but improves mechanical reliability in high-vibration or high-shock environments. Presence or absence of Board Lock does not prevent functional substitution.
Q: Can a 9-position D-Sub receptacle mate with a 9-position D-Sub plug from a different manufacturer?
A: Yes, provided both connectors conform to the DE/E shell size standard and maintain identical pin spacing (0.318" backset spacing). All listed receptacle parts are compatible with standard 9-position D-Sub plugs meeting this specification.
Q: What inventory levels should be considered for procurement decisions?
A: FCE17E09SA4DB has 1058 units in stock. FCE17E09SA44B has 1101 units. HARTING parts range from 767 to 1362 units. NorComp 182-009-213R161 has 8733 units and 182-009-213R171 has 2344 units. Higher inventory levels may indicate longer lead time availability and reduced supply chain risk.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts