FCE17E09PC600 Equivalent & Substitute Parts

Part Overview

The FCE17E09PC600 is a 9-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This connector features male pins, right-angle mounting, and solder termination, designed for signal applications in through-hole configurations. The connector is currently active in production with 1150 pieces in stock. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements permit component flexibility within specified electrical and mechanical parameters.

Substiute Parts

FCE17E09PC600

Amphenol ICC (Commercial Products)In Stock: 1254FCE17E09PC600 Datasheet

Current PartRFQ

183-009-113R171

NorComp Inc.In Stock: 1942183-009-113R171 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the FCE17E09PC600 with the NorComp Inc. part number 183-009-113R171 is permissible based on the following alignment of critical parameters:

Both connectors share identical specifications for:

• Connector style (D-Sub)
• Connector type (Plug, Male Pins)
• Number of positions (9)
• Number of rows (2)
• Shell size and connector layout (1, DE/E)
• Mounting type (Through Hole, Right Angle)
• Termination method (Solder)
• Current rating (5A)
• Backset spacing (0.590" / 14.99mm)
• Material flammability rating (UL94 V-0)
• Contact finish (Gold)
• Color (Black)

These parameters establish mechanical and electrical compatibility for direct substitution in applications where the FCE17E09PC600 is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the FCE17E09PC600 and 183-009-113R171 are active production components with full regulatory compliance. The FCE17E09PC600 maintains RoHS compliance with an MSL rating of 1 (Unlimited), indicating no moisture sensitivity constraints. The 183-009-113R171 achieves ROHS3 compliance and carries REACH Unaffected status, providing additional regulatory coverage for certain applications.

The NorComp substitute part offers an extended operating temperature range (-55°C ~ 105°C) compared to the Amphenol part (-40°C ~ 85°C), making it suitable for applications requiring broader thermal performance. The substitute part also includes panel mount capability in addition to through-hole mounting, providing design flexibility.

Shell finish differs between the two parts: the primary part features tin plating while the substitute uses nickel plating. Both finishes provide corrosion resistance appropriate for signal-level applications. Contact material composition differs (Phosphor Bronze versus Brass), and dielectric materials vary (Thermoplastic Glass Filled versus Polyamide PA9T), though both meet UL94 V-0 flammability requirements.

Selection between these parts should be based on specific application requirements regarding operating temperature range, shell finish preference, and regulatory compliance needs.

Frequently Asked Questions (FAQ)

Q: Can the 183-009-113R171 directly replace the FCE17E09PC600 in existing designs?

A: Yes. Both connectors share identical mechanical and electrical specifications for connector style, pin count, shell size, mounting type, current rating, and backset spacing. Direct substitution is permissible from a compatibility standpoint.

Q: What are the differences in operating temperature ranges?

A: The FCE17E09PC600 operates from -40°C to 85°C, while the 183-009-113R171 operates from -55°C to 105°C. Applications requiring operation below -40°C or above 85°C must use the NorComp substitute part.

Q: How do the shell finishes differ between these parts?

A: The FCE17E09PC600 features a steel shell with tin plating. The 183-009-113R171 features a steel shell with nickel plating. Both finishes provide corrosion resistance for signal applications. Selection depends on specific environmental and application requirements.

Q: What is the difference in contact material composition?

A: The FCE17E09PC600 uses Phosphor Bronze contacts, while the 183-009-113R171 uses Brass contacts. Both materials are suitable for signal-level applications and maintain gold plating on contact surfaces.

Q: Are there differences in regulatory compliance between these parts?

A: The FCE17E09PC600 is RoHS Compliant with MSL 1 (Unlimited). The 183-009-113R171 is ROHS3 Compliant and REACH Unaffected. Both meet UL94 V-0 flammability requirements. The substitute part provides additional regulatory coverage for certain jurisdictions.

Q: What is the difference in dielectric material?

A: The FCE17E09PC600 uses Thermoplastic with glass filling. The 183-009-113R171 uses Polyamide (PA9T) Nylon 9T. Both materials meet UL94 V-0 flammability standards and are suitable for the specified applications.

Q: Does the NorComp part offer additional mounting options?

A: Yes. The 183-009-113R171 supports Panel Mount in addition to Through Hole and Right Angle mounting, providing additional design flexibility compared to the Amphenol part.

Q: What is the difference in contact finish thickness?

A: The FCE17E09PC600 specifies 15.0µin (0.38µm) gold plating thickness. The 183-009-113R171 specifies flash gold plating. Both provide adequate contact surface protection for signal applications.