FCE17E09PC49B D-Sub Plug Connector Equivalent & Substitute Parts

Part Overview

The FCE17E09PC49B is a 9-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This right-angle, through-hole solder connector features male pins and is designed for signal applications in industrial and commercial electronics. The connector is currently in active production status with 912 pieces available in new original inventory.

Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable, when inventory constraints exist, or when design flexibility permits component interchange based on equivalent electrical and mechanical specifications.

Substiute Parts

FCE17E09PC49B

Amphenol ICC (Commercial Products)In Stock: 1012FCE17E09PC49B Datasheet

Current PartRFQ

183-009-113R171

NorComp Inc.In Stock: 1942183-009-113R171 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the FCE17E09PC49B are identified based on strict equivalence of the following critical parameters:

Mechanical Compatibility:

• Connector style (D-Sub)
• Connector type (Plug, Male Pins)
• Number of positions (9)
• Number of rows (2)
• Shell size and layout (1 / DE, E)
• Mounting type (Through Hole, Right Angle)
• Backset spacing (0.590" / 14.99mm)

Electrical Compatibility:

• Termination method (Solder)
• Current rating (5A)
• Contact type (Signal)
• Material flammability rating (UL94 V-0)

Environmental & Regulatory:

• RoHS compliance status
• ECCN classification (EAR99)
• HTSUS code (8536.69.4040)

The substitute part 183-009-113R171 from NorComp Inc. meets all critical mechanical and electrical parameters, enabling direct functional interchange in applications where the FCE17E09PC49B is specified.

Parameter Comparison

Engineering Selection Recommendations

Primary Part: FCE17E09PC49B

The FCE17E09PC49B remains the primary selection when Amphenol ICC sourcing is required or when inventory availability is confirmed. This connector is RoHS Compliant and carries active product status with established supply chain presence (912 pieces in stock).

Substitute Part: 183-009-113R171

The NorComp Inc. 183-009-113R171 serves as a functional equivalent for applications where manufacturer flexibility is permitted. This substitute offers the following characteristics:

• Identical mechanical interface (9-position D-Sub, right-angle, through-hole solder)
• Equivalent electrical performance (5A current rating, signal contact type)
• Enhanced operating temperature range (-55°C ~ 105°C versus -40°C ~ 85°C)
• ROHS3 Compliant status (exceeds RoHS Compliance requirement)
• Higher inventory availability (1840 pieces in stock)
• EAR99 export classification matching the primary part

The substitute part includes panel mount capability in addition to through-hole mounting, providing design flexibility. Shell material finish differs (nickel plated versus tin plated) and contact material differs (brass versus phosphor bronze), but these variations do not affect functional compatibility for signal applications at the specified 5A current rating.

Frequently Asked Questions (FAQ)

Q: Can the 183-009-113R171 be used as a direct replacement for the FCE17E09PC49B in existing designs?

A: Yes. Both connectors share identical mechanical interfaces (9-position D-Sub, shell size 1/DE-E, right-angle through-hole solder termination) and equivalent electrical specifications (5A current rating, signal contact type, UL94 V-0 flammability rating). The substitute part is mechanically and electrically interchangeable.

Q: What are the differences between these two connectors?

A: The primary differences are: (1) Shell material finish—FCE17E09PC49B uses tin plating while 183-009-113R171 uses nickel plating; (2) Contact material—FCE17E09PC49B uses phosphor bronze while 183-009-113R171 uses brass; (3) Operating temperature range—183-009-113R171 supports -55°C ~ 105°C versus -40°C ~ 85°C for FCE17E09PC49B; (4) RoHS certification level—183-009-113R171 is ROHS3 Compliant versus RoHS Compliant for FCE17E09PC49B; (5) Mounting options—183-009-113R171 includes panel mount capability in addition to through-hole mounting.

Q: Are both connectors RoHS compliant?

A: Yes. The FCE17E09PC49B is RoHS Compliant. The 183-009-113R171 is ROHS3 Compliant, which represents a higher compliance standard. Both parts meet RoHS requirements.

Q: What is the significance of the different shell material finishes?

A: The FCE17E09PC49B features steel with tin plating, while the 183-009-113R171 features steel with nickel plating. Both finishes provide corrosion resistance suitable for signal applications. The choice between them depends on specific environmental exposure and application requirements not specified in the component parameters.

Q: Do these connectors have different current ratings?

A: No. Both the FCE17E09PC49B and 183-009-113R171 are rated for 5A current, making them electrically equivalent for this specification.

Q: What is the backset spacing, and is it identical between both parts?

A: Backset spacing is 0.590" (14.99mm) for both connectors. This measurement defines the distance from the mounting surface to the connector interface and is identical, ensuring mechanical compatibility.

Q: Can the 183-009-113R171 be used in applications requiring the extended temperature range?

A: The 183-009-113R171 supports an operating temperature range of -55°C ~ 105°C, which exceeds the -40°C ~ 85°C range of the FCE17E09PC49B. Applications requiring operation below -40°C or above 85°C should use the 183-009-113R171.

Q: Are both connectors available in the same packaging?

A: The FCE17E09PC49B packaging is not specified in the provided data. The 183-009-113R171 is supplied in Tray packaging. Packaging differences do not affect connector functionality but may impact handling, storage, and assembly processes.

Q: What is the contact finish thickness specification?

A: The FCE17E09PC49B specifies a contact finish thickness of 15.0µin (0.38µm). The 183-009-113R171 specifies contact finish as "Flash," which represents a thinner plating layer. Both finishes provide gold contact surfaces suitable for signal applications.