FCE17E09PC45B D-Sub Plug Connector - Equivalent & Substitute Parts

Part Overview

The FCE17E09PC45B is a 9-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This connector features male pins, right-angle through-hole mounting, and solder termination. The part is currently active in production with 783 units in stock.

D-Sub connectors are essential interface components in industrial, telecommunications, and commercial equipment applications. Substitute parts become necessary when the primary manufacturer experiences supply constraints, when alternative sourcing reduces procurement costs, or when design requirements permit cross-manufacturer compatibility within specified electrical and mechanical parameters.

Substiute Parts

FCE17E09PC45B

Amphenol ICC (Commercial Products)In Stock: 797FCE17E09PC45B Datasheet

Current PartRFQ

183-009-113R171

NorComp Inc.In Stock: 1942183-009-113R171 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for D-Sub connectors is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Connector style (D-Sub)
• Connector type (Plug with male pins)
• Number of positions (9)
• Number of rows (2)
• Shell size and layout (1 / DE, E)
• Mounting type (Through hole, right angle)
• Termination method (Solder)
• Current rating (5A minimum)
• Backset spacing (0.590" / 14.99mm)
• Contact finish (Gold)

Acceptable Variations:

• Shell material finish (tin plated vs. nickel plated)
• Contact material (phosphor bronze vs. brass)
• Dielectric material composition (thermoplastic glass-filled vs. polyamide)
• Operating temperature range (substitute may exceed original range)
• Flange feature location (board side vs. housing/shell)
• Compliance certifications (RoHS vs. ROHS3)

The substitute part 183-009-113R171 from NorComp Inc. meets all mandatory matching parameters and is therefore classified as a direct functional equivalent.

Parameter Comparison

Engineering Selection Recommendations

Primary Part: FCE17E09PC45B

The FCE17E09PC45B remains the preferred selection when:

• Original equipment manufacturer (OEM) specifications explicitly require Amphenol ICC components
• Tin-plated steel shell finish is required for specific environmental or corrosion resistance applications
• Phosphor bronze contact material is specified in design documentation
• Operating temperature range does not exceed -40°C to 85°C
• Procurement lead times and inventory availability are not constraints

Substitute Part: 183-009-113R171

The 183-009-113R171 from NorComp Inc. is a qualified functional equivalent when:

• Design specifications permit cross-manufacturer D-Sub connectors with matching electrical and mechanical parameters
• Extended operating temperature range (-55°C to 105°C) provides additional thermal margin
• Nickel-plated steel shell finish meets environmental requirements
• Brass contact material is acceptable within circuit design parameters
• ROHS3 compliance status satisfies regulatory requirements
• Higher inventory availability (1840 units) reduces procurement risk

Both parts carry identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications, ensuring equivalent export and tariff treatment.

Frequently Asked Questions (FAQ)

Q: Can the 183-009-113R171 be used as a direct replacement for the FCE17E09PC45B in existing designs?

A: Yes. Both connectors share identical connector style, type, position count, row configuration, shell size, mounting method, termination type, current rating, and backset spacing. The substitute part meets all mandatory mechanical and electrical parameters for D-Sub 9-position plug connectors.

Q: What are the differences in shell material finish between these two parts?

A: The FCE17E09PC45B features a tin-plated steel shell, while the 183-009-113R171 uses a nickel-plated steel shell. Both finishes provide corrosion resistance. Tin plating is typically selected for general-purpose applications, while nickel plating offers enhanced durability in harsh environments. Design specifications should confirm which finish is required.

Q: Does the contact finish thickness difference affect compatibility?

A: The FCE17E09PC45B specifies 15.0µin (0.38µm) gold contact finish thickness, while the 183-009-113R171 specifies flash gold plating. Both provide gold contact surfaces for signal integrity. Flash plating is a thin, economical coating suitable for standard applications. If specific contact resistance or durability requirements mandate thicker gold plating, the FCE17E09PC45B is the appropriate choice.

Q: Why does the substitute part have a wider operating temperature range?

A: The 183-009-113R171 operates from -55°C to 105°C, compared to the FCE17E09PC45B range of -40°C to 85°C. The wider range reflects the polyamide (PA9T) dielectric material used in the NorComp connector, which exhibits greater thermal stability than the glass-filled thermoplastic in the Amphenol part. For applications within the original -40°C to 85°C range, both parts perform identically.

Q: Are there packaging differences between these connectors?

A: The FCE17E09PC45B is supplied in standard packaging, while the 183-009-113R171 is packaged in trays. Tray packaging is suitable for automated assembly processes and bulk handling. Confirm packaging requirements with your assembly or procurement department before substitution.

Q: Do both parts meet the same compliance standards?

A: Both parts carry UL94 V-0 flammability ratings and EAR99 export classifications. The FCE17E09PC45B is RoHS Compliant, while the 183-009-113R171 is ROHS3 Compliant. ROHS3 represents an updated compliance standard that supersedes RoHS. Both statuses satisfy current regulatory requirements for commercial and industrial applications.

Q: What is the difference between phosphor bronze and brass contact materials?

A: The FCE17E09PC45B uses phosphor bronze contacts, while the 183-009-113R171 uses brass. Both materials provide excellent electrical conductivity and mechanical durability. Phosphor bronze offers slightly higher strength and fatigue resistance, while brass provides cost efficiency. For standard signal applications at 5A current rating, both materials perform equivalently.

Q: Can I mix these two connector types in the same assembly?

A: Yes, provided the mating connector (socket) is compatible with both plug styles. Since both parts conform to D-Sub 9-position DE/E shell size specifications with identical backset spacing and pin configuration, they are mechanically and electrically interchangeable with standard D-Sub sockets.