FCE17E09PC410 Equivalent & Substitute Parts

Part Overview

The FCE17E09PC410 is a 9-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This connector features male pins, right-angle mounting, and solder termination, designed for signal applications in through-hole configurations. The connector is currently active in production with 1084 pieces in stock. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits component selection from qualified manufacturers.

Substiute Parts

FCE17E09PC410

Amphenol ICC (Commercial Products)In Stock: 1163FCE17E09PC410 Datasheet

Current PartRFQ

183-009-113R171

NorComp Inc.In Stock: 1942183-009-113R171 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the FCE17E09PC410 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector style: D-Sub
• Connector type: Plug with male pins
• Number of positions: 9
• Number of rows: 2
• Shell size and layout: 1 (DE, E)
• Mounting type: Through hole, right angle
• Termination method: Solder
• Current rating: 5A
• Backset spacing: 0.590" (14.99mm)
• Contact type: Signal
• Flange feature: Housing/Shell (4-40)
• Material flammability rating: UL94 V-0

The substitute part 183-009-113R171 from NorComp Inc. meets all mandatory matching parameters. Variations in shell material finish (tin plated versus nickel plated), contact material composition (phosphor bronze versus brass), contact finish thickness specification, dielectric material formulation, and operating temperature range do not preclude substitution when the core electrical and mechanical interface requirements are satisfied.

Parameter Comparison

Engineering Selection Recommendations

Both the FCE17E09PC410 and 183-009-113R171 are active production components with current inventory availability. The FCE17E09PC410 maintains RoHS compliance status, while the 183-009-113R171 carries ROHS3 compliance designation, indicating alignment with current regulatory requirements.

The 183-009-113R171 provides an extended operating temperature range of -55°C to 105°C compared to the FCE17E09PC410 range of -40°C to 85°C. This extended range accommodates applications requiring operation at lower ambient temperatures or in thermally demanding environments.

Shell material finish differs between the two parts: the FCE17E09PC410 features tin plating, while the 183-009-113R171 uses nickel plating. Both finishes provide corrosion resistance and are compatible with gold-plated contacts. The choice between these finishes depends on specific environmental exposure and application requirements.

Both connectors satisfy the mandatory electrical and mechanical interface requirements for D-Sub 9-position plug applications with solder termination and 5A current capacity.

Frequently Asked Questions (FAQ)

Q: Can the 183-009-113R171 directly replace the FCE17E09PC410 in existing designs?

A: Yes. Both connectors share identical connector style, pin count, shell size, mounting configuration, termination method, and current rating. The physical interface and electrical performance are equivalent for D-Sub 9-position plug applications.

Q: What is the significance of the different shell material finishes?

A: The FCE17E09PC410 uses tin plating while the 183-009-113R171 uses nickel plating. Both provide corrosion protection and are compatible with gold-plated contacts. Selection depends on environmental exposure conditions and specific application requirements for corrosion resistance.

Q: Does the extended operating temperature range of the 183-009-113R171 affect compatibility?

A: The extended range (-55°C to 105°C versus -40°C to 85°C) does not affect compatibility. The 183-009-113R171 operates within the temperature envelope of the FCE17E09PC410 and extends capability for applications requiring lower temperature operation.

Q: Are there differences in contact material between these parts?

A: Yes. The FCE17E09PC410 uses phosphor bronze contacts while the 183-009-113R171 uses brass contacts. Both materials are standard for D-Sub connectors and provide equivalent electrical performance for signal applications at the specified 5A current rating.

Q: What packaging differences exist between these parts?

A: The FCE17E09PC410 is supplied in standard packaging, while the 183-009-113R171 is supplied in trays. Packaging format does not affect connector performance or compatibility.

Q: Are both parts compliant with current regulatory standards?

A: Yes. The FCE17E09PC410 is RoHS Compliant. The 183-009-113R171 is ROHS3 Compliant, indicating compliance with the current revision of RoHS regulations. Both parts carry UL94 V-0 material flammability ratings.

Q: What is the significance of the mounting type designation "Panel Mount, Through Hole, Right Angle" for the 183-009-113R171?

A: The 183-009-113R171 supports both panel mount and through-hole mounting configurations, providing additional installation flexibility compared to the FCE17E09PC410 which specifies through-hole and right-angle mounting. Both configurations are compatible with standard D-Sub 9-position applications.