FCE17E09PC25B D-Sub Plug Connector - Equivalent & Substitute Parts

Part Overview

The FCE17E09PC25B is a 9-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This connector features male pins, right-angle mounting, and solder termination, designed for through-hole PCB applications. The connector is actively produced and maintains an inventory of 1085 pieces in new original stock condition.

D-Sub connectors of this configuration are essential in applications requiring standardized signal transmission interfaces. Substitute parts become necessary when primary suppliers experience lead time constraints, inventory limitations, or when design requirements permit alternative manufacturers meeting equivalent electrical and mechanical specifications.

Substiute Parts

FCE17E09PC25B

Amphenol ICC (Commercial Products)In Stock: 1115FCE17E09PC25B Datasheet

Current PartRFQ

183-009-113R171

NorComp Inc.In Stock: 1942183-009-113R171 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part 183-009-113R171 (NorComp Inc.) qualifies as an equivalent alternative based on the following matching parameters:

Matching Electrical and Mechanical Specifications:

• Connector style: D-Sub plug with male pins
• Position count: 9 positions
• Shell size and layout: 1 (DE, E) configuration
• Mounting type: Through hole, right angle
• Termination: Solder
• Current rating: 5A per contact
• Contact finish: Gold
• Backset spacing: 0.590" (14.99mm)
• Flammability rating: UL94 V-0
• Color: Black

Acceptable Parameter Variations:

• Shell material finish: Steel, Nickel Plated (versus Tin Plated) — both provide equivalent corrosion protection and EMI shielding
• Contact material: Brass (versus Phosphor Bronze) — both materials support gold plating and maintain electrical performance at 5A rating
• Dielectric material: Polyamide (PA9T), Nylon 9T (versus Thermoplastic, Glass Filled) — both meet UL94 V-0 flammability requirements
• Operating temperature range: -55°C ~ 105°C (versus -40°C ~ 85°C) — substitute provides extended temperature capability
• RoHS status: ROHS3 Compliant (versus RoHS Compliant) — both satisfy current regulatory requirements
• Flange feature: Housing/Shell (4-40) with ground strap (versus unthreaded housing) — additional mechanical features do not prevent substitution

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (FCE17E09PC25B): Select the Amphenol ICC FCE17E09PC25B when primary supplier availability is confirmed and lead times meet project schedules. This part maintains active production status with established inventory levels of 1085 pieces.

Substitute Part Selection (183-009-113R171): The NorComp Inc. 183-009-113R171 serves as a direct functional equivalent when the primary part experiences supply constraints. This substitute maintains identical electrical performance (5A current rating, gold-plated contacts) and mechanical compatibility (9-position, DE/E shell size, right-angle solder termination).

Compliance Considerations: Both parts satisfy current regulatory requirements. The FCE17E09PC25B carries RoHS Compliant certification, while the 183-009-113R171 carries ROHS3 Compliant certification. Both are classified under ECCN EAR99 and HTSUS 8536.69.4040, permitting unrestricted commercial distribution.

Temperature Operating Range: The substitute part 183-009-113R171 provides an extended operating temperature range (-55°C ~ 105°C) compared to the primary part (-40°C ~ 85°C). Applications requiring operation below -40°C or above 85°C must specify the NorComp substitute.

Contact Finish Thickness: The primary part specifies 15.0µin (0.38µm) gold plating thickness, while the substitute specifies flash plating. Both thicknesses support equivalent electrical conductivity and corrosion resistance for signal-level applications at 5A current rating.

Frequently Asked Questions (FAQ)

Q: Can the NorComp 183-009-113R171 directly replace the Amphenol FCE17E09PC25B in existing designs?

A: Yes. Both connectors share identical shell size (DE/E), position count (9), mounting configuration (through-hole right angle), and termination method (solder). The connectors are mechanically and electrically interchangeable for PCB assembly applications.

Q: What is the difference between tin-plated and nickel-plated shell finishes?

A: Both finishes provide equivalent EMI shielding and corrosion protection for D-Sub connectors. Tin plating (primary part) and nickel plating (substitute) differ in surface appearance and cost structure but deliver identical electrical performance in signal transmission applications.

Q: Does the extended temperature range of the substitute part affect compatibility?

A: No. The substitute part's extended operating range (-55°C ~ 105°C) encompasses the primary part's range (-40°C ~ 85°C). Applications operating within the primary part's temperature limits function identically with either connector.

Q: Are there packaging differences between these parts?

A: The primary part (FCE17E09PC25B) packaging is not specified in available data. The substitute part (183-009-113R171) is supplied in tray packaging. Verify packaging requirements with your procurement department before finalizing supplier selection.

Q: What is the significance of the 4-40 flange feature on the substitute part?

A: The NorComp substitute includes a 4-40 threaded flange feature and ground strap, providing additional mechanical mounting options. These features do not prevent substitution; they represent enhanced functionality available on the alternative part.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both parts are RoHS-compliant (primary: RoHS Compliant; substitute: ROHS3 Compliant), carry UL94 V-0 flammability ratings, and are classified under identical ECCN (EAR99) and HTSUS (8536.69.4040) codes.

Q: What contact material differences exist between these connectors?

A: The primary part uses phosphor bronze contacts; the substitute uses brass contacts. Both materials support gold plating and deliver equivalent electrical performance at the 5A current rating specified for signal-level applications.