FCE17E09PB6DB Equivalent & Substitute Parts

Part Overview

The FCE17E09PB6DB is a 9-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This right-angle, through-hole solder connector features male pins in a 1 (DE, E) shell size configuration. The connector is actively produced and stocked with 794 units in inventory. D-Sub connectors of this type are essential for applications requiring standardized signal transmission interfaces with robust mechanical and electrical performance. Substitute parts are identified to address inventory availability, extended operating temperature ranges, alternative flange configurations, or specific compliance requirements while maintaining functional equivalence.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Material Flammability Rating	UL94 V-0
Current Rating (Amps)	5A
Operating Temperature	-40°C ~ 85°C
RoHS Status	RoHS Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the FCE17E09PB6DB is determined by the following core parameters: connector style (D-Sub), connector type (plug with male pins), number of positions (9), number of rows (2), shell size (1 DE/E), mounting type (through-hole right-angle), and termination method (solder). All identified substitute parts meet these baseline requirements.

Secondary parameters that differentiate substitute parts include flange feature configuration (board-side, mating-side, or housing-mounted), contact finish specifications, shell material finish, and operating temperature range. Current rating and backset spacing are also critical compatibility factors. Parts are grouped by manufacturer and specific feature combinations to enable selection based on application-specific requirements such as mounting constraints, environmental conditions, or compliance certifications.

The following key parameters determine substitution validity:

Connector style, type, position count, and shell size (mandatory match)
Mounting type and termination method (mandatory match)
Material flammability rating UL94 V-0 (mandatory match)
Moisture sensitivity level 1 (mandatory match)
Current rating minimum 5A (acceptable at 5A or higher)
Backset spacing tolerance (0.405" to 0.409" acceptable range)
Operating temperature range (acceptable if equal to or exceeds -40°C to 85°C)

Parameter Comparison

Parameter	FCE17E09PB6DB	09651626817	09651627817	D09P13A4GL00LF	D09P13A4GV00LF	D09P13A4GX00LF	D09P13A4PA00LF	D09P13A4PV00LF	D09P13A6GX00LF	D09P13B4PA00LF	D09P13B6GV00LF
Manufacturer	Amphenol ICC	HARTING	HARTING	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Contact Type	Signal	Signal	Signal	Signal	Signal	Signal	Signal	Signal	Signal	Signal	Signal
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Current Rating (Amps)	5A	6.5A	6.5A	5A per Contact	5A per Contact	5A per Contact	5A per Contact	5A per Contact	5A per Contact	5A per Contact	5A per Contact
Backset Spacing	0.405" (10.29mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)
Operating Temperature	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
ECCN	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99
HTSUS	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040

Engineering Selection Recommendations

All identified substitute parts satisfy the mandatory functional and compliance requirements for direct substitution with the FCE17E09PB6DB. Selection among alternatives is determined by specific application constraints and compliance certifications.

HARTING 09651626817 and 09651627817: These parts provide extended operating temperature range (-55°C to 125°C) and higher current rating (6.5A) compared to the primary part. Both are ROHS3 compliant and feature board lock and grounding indents. The mating-side female screwlock (4-40) flange configuration differs from the board-side M3 configuration of the primary part. These parts are suitable for applications requiring enhanced thermal performance and higher current capacity.

Amphenol ICC (FCI) Delta D Series (D09P13A4GL00LF, D09P13A4GV00LF, D09P13A4GX00LF, D09P13A4PA00LF, D09P13A4PV00LF, D09P13A6GX00LF, D09P13B4PA00LF, D09P13B6GV00LF): All Delta D series parts are RoHS compliant or ROHS3 compliant and provide extended operating temperature range (-55°C to 125°C). These parts feature 300V voltage rating and are available with multiple flange configurations: housing/shell with M3 or 4-40 threading, mating-side female screwlock (4-40), or unthreaded housing/shell options. Contact finish specifications vary between flash and 30.0µin (0.76µm) gold plating. Selection within this series depends on specific flange mounting requirements and contact finish durability specifications.

Compliance Considerations: Parts with ROHS3 compliance (09651626817, 09651627817, D09P13A6GX00LF, D09P13B6GV00LF) represent current manufacturing standards. Parts with REACH Affected status (D09P13A4PA00LF, D09P13A6GX00LF, D09P13B4PA00LF, D09P13B6GV00LF) require verification of REACH substance compliance for specific applications.

Frequently Asked Questions (FAQ)

Q: Can I substitute the FCE17E09PB6DB with any of the listed alternatives?

A: Yes. All listed parts meet the mandatory substitution criteria: 9-position D-Sub plug connector with male pins, 1 (DE, E) shell size, through-hole right-angle mounting, solder termination, UL94 V-0 flammability rating, and MSL 1 classification. Functional compatibility is confirmed across all alternatives.

Q: What is the difference between the HARTING parts and the Amphenol ICC Delta D series?

A: HARTING parts (09651626817, 09651627817) feature mating-side female screwlock (4-40) flanges and copper alloy contacts with stamped contact form. Amphenol ICC Delta D series parts offer multiple flange configurations (housing-mounted M3, housing-mounted 4-40, mating-side female screwlock, or unthreaded housing) with brass contacts. Delta D series parts include 300V voltage rating specification. Both manufacturers provide extended operating temperature range (-55°C to 125°C) and higher current capacity (6.5A for HARTING, 5A per contact for Delta D).

Q: Does backset spacing variation affect compatibility?

A: The primary part specifies 0.405" (10.29mm) backset spacing, while all substitute parts specify 0.409" (10.40mm). This 0.004" (0.11mm) difference is within acceptable tolerance for D-Sub connector applications and does not affect functional compatibility or mating performance.

Q: Which substitute part should I select for applications requiring extended temperature operation?

A: All substitute parts provide extended operating temperature range of -55°C to 125°C, compared to the primary part's -40°C to 85°C range. Selection among alternatives depends on flange configuration requirements. For board-side mounting with M3 threading, select D09P13A4GL00LF. For mating-side female screwlock (4-40), select D09P13A4GV00LF or D09P13B6GV00LF. For housing-mounted 4-40 threading, select D09P13A4GX00LF or D09P13A6GX00LF.

Q: What is the significance of contact finish thickness specifications?

A: The primary part specifies 15.0µin (0.38µm) gold contact finish thickness. Delta D series parts specify either flash thickness or 30.0µin (0.76µm) thickness. Flash thickness provides minimal gold plating for corrosion protection. The 30.0µin specification (D09P13A6GX00LF, D09P13B6GV00LF) provides enhanced durability for high-cycle mating applications. Selection depends on application mating cycle requirements and environmental exposure conditions.

Q: Are there packaging differences among substitute parts?

A: The primary part is supplied in bulk packaging. HARTING alternatives (09651626817, 09651627817) are supplied in bulk packaging. All Amphenol ICC Delta D series parts are supplied in tray packaging. Packaging format does not affect functional compatibility but may influence procurement and handling procedures.

Q: Which parts have REACH compliance certification?

A: Parts with REACH Unaffected status include 09651626817, 09651627817, D09P13A4GL00LF, D09P13A4GV00LF, D09P13A4PV00LF, and D09P13B4PA00LF. Parts with REACH Affected status include D09P13A4PA00LF, D09P13A6GX00LF, and D09P13B6GV00LF. Applications subject to REACH regulations should specify parts with REACH Unaffected status or verify substance compliance for REACH Affected parts.

Q: What is the difference between RoHS and ROHS3 compliance?

A: RoHS Compliant indicates compliance with the original Restriction of Hazardous Substances directive. ROHS3 Compliant indicates compliance with the updated RoHS 3 directive (2015/863/EU), which includes additional restricted substances. ROHS3 compliance represents current regulatory standards. Parts with ROHS3 compliance (09651626817, 09651627817, D09P13A6GX00LF, D09P13B6GV00LF) are preferred for new designs.

Q: Can I use a substitute part with higher current rating in place of the primary part?

A: Yes. The primary part is rated for 5A current. HARTING alternatives are rated for 6.5A, and Delta D series parts are rated for 5A per contact. Higher current rating provides additional design margin and is functionally compatible with applications designed for 5A operation.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message