FCE17E09PB60B D-Sub Plug 9 Position Right Angle Solder Connector

Part Overview

The FCE17E09PB60B is a 9 position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This connector features male pins, right angle through-hole mounting, and solder termination. The part is actively produced and maintains an inventory of 695 pieces in new original condition. D-Sub connectors of this configuration are essential components in applications requiring standardized signal transmission, data communication, and industrial control systems. Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and application-specific requirements.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Contact Type	Signal
Current Rating (Amps)	5A
Material Flammability Rating	UL94 V-0
Operating Temperature	-40°C ~ 85°C
RoHS Status	RoHS Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the FCE17E09PB60B is determined by strict adherence to the following core parameters:

Critical Substitution Parameters:

Connector Style: D-Sub
Connector Type: Plug, Male Pins
Number of Positions: 9
Number of Rows: 2
Shell Size, Connector Layout: 1 (DE, E)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Contact Type: Signal
Material Flammability Rating: UL94 V-0

Acceptable Variation Parameters:

Current Rating: 5A or higher
Operating Temperature: Must encompass or exceed -40°C ~ 85°C
Contact Finish: Gold or equivalent conductive finish
Shell Material: Steel with appropriate plating
Flange Feature: Board Side, Mating Side, or Housing/Shell configurations
Dielectric Material: Thermoplastic or polyester-based materials meeting UL94 V-0

All substitute parts listed maintain identical core connector geometry, pin configuration, and mounting characteristics. Variations in flange design, contact finish thickness, and dielectric material composition do not affect functional interchangeability within the specified electrical and mechanical parameters.

Parameter Comparison

Part Number	Manufacturer	Connector Type	Positions	Mounting	Termination	Current Rating (A)	Operating Temp (°C)	RoHS Status	Inventory (Pcs)
FCE17E09PB60B	Amphenol ICC (Commercial Products)	Plug, Male Pins	9	Through Hole, Right Angle	Solder	5	-40 ~ 85	RoHS Compliant	695
09651626817	HARTING	Plug, Male Pins	9	Through Hole, Right Angle	Solder	6.5	-55 ~ 125	ROHS3 Compliant	1090
09651627817	HARTING	Plug, Male Pins	9	Through Hole, Right Angle	Solder	6.5	-55 ~ 125	ROHS3 Compliant	757
D09P13A4GL00LF	Amphenol ICC (FCI)	Plug, Male Pins	9	Through Hole, Right Angle	Solder	5	-55 ~ 125	RoHS Compliant	1352
D09P13A4GV00LF	Amphenol ICC (FCI)	Plug, Male Pins	9	Through Hole, Right Angle	Solder	5	-55 ~ 125	RoHS Compliant	5069
D09P13A4GX00LF	Amphenol ICC (FCI)	Plug, Male Pins	9	Through Hole, Right Angle	Solder	5	-55 ~ 125	RoHS Compliant	1920
D09P13A4PA00LF	Amphenol ICC (FCI)	Plug, Male Pins	9	Through Hole, Right Angle	Solder	5	-55 ~ 125	RoHS Compliant	1070
D09P13A4PV00LF	Amphenol ICC (FCI)	Plug, Male Pins	9	Through Hole, Right Angle	Solder	5	-55 ~ 125	RoHS Compliant	1502
D09P13A6GX00LF	Amphenol ICC (FCI)	Plug, Male Pins	9	Through Hole, Right Angle	Solder	5	-55 ~ 125	ROHS3 Compliant	1363
D09P13B4PA00LF	Amphenol ICC (FCI)	Plug, Male Pins	9	Through Hole, Right Angle	Solder	5	-55 ~ 125	RoHS Compliant	1608
D09P13B6GV00LF	Amphenol ICC (FCI)	Plug, Male Pins	9	Through Hole, Right Angle	Solder	5	-55 ~ 125	ROHS3 Compliant	1132

Engineering Selection Recommendations

Primary Substitutes (Amphenol ICC FCI Delta D Series):

The D09P13 series connectors from Amphenol ICC (FCI) represent direct functional equivalents to the FCE17E09PB60B. These parts maintain identical connector geometry, pin configuration, and electrical ratings. The Delta D series offers extended operating temperature range (-55°C ~ 125°C) compared to the FCE17 series (-40°C ~ 85°C), providing enhanced thermal performance for demanding applications. All Delta D variants listed are RoHS Compliant or ROHS3 Compliant, ensuring regulatory compliance across global markets.

Secondary Substitutes (HARTING 09651626817 and 09651627817):

The HARTING 09651626817 and 09651627817 connectors provide functional equivalence with enhanced current rating (6.5A versus 5A) and extended operating temperature range (-55°C ~ 125°C). Both parts are ROHS3 Compliant and feature identical shell size, pin count, and mounting configuration. These connectors are suitable for applications requiring higher current capacity or broader thermal operating windows.

Flange Feature Considerations:

Substitute parts vary in flange design: Board Side (M3), Mating Side Female Screwlock (4-40), or Housing/Shell configurations. Selection depends on application-specific mounting requirements. Board Side flanges provide direct PCB mounting. Mating Side Female Screwlock flanges enable secure connector coupling. Housing/Shell flanges support panel or chassis mounting. All configurations maintain mechanical and electrical interchangeability within the D-Sub 9-position standard.

Contact Finish and Dielectric Material:

Substitute parts feature gold-plated contacts with varying thickness specifications (Flash, 15.0µin, or 30.0µin). Dielectric materials include Thermoplastic, Polybutylene Terephthalate (PBT), and Polyester formulations. All materials meet UL94 V-0 flammability requirements. Contact finish and dielectric variations do not affect functional compatibility.

Frequently Asked Questions (FAQ)

Q: Can D09P13A4GV00LF replace FCE17E09PB60B directly on a PCB?

A: Yes. Both connectors share identical shell size (1/DE/E), 9-position pin configuration, through-hole right-angle mounting, and solder termination. The D09P13A4GV00LF features a Mating Side Female Screwlock (4-40) flange, while the FCE17E09PB60B features a Board Side (M3) flange. Flange differences do not affect PCB mounting compatibility; they determine connector coupling and panel attachment methods.

Q: What is the difference between HARTING 09651626817 and Amphenol ICC D09P13A4GV00LF?

A: Both connectors are functionally equivalent 9-position D-Sub plugs with right-angle solder termination. The HARTING part supports 6.5A current rating and operates across -55°C ~ 125°C. The Amphenol ICC part supports 5A current rating and operates across -55°C ~ 125°C. The HARTING connector features Mating Side Female Screwlock (4-40) flange and Copper Alloy contacts. The Amphenol ICC connector features Mating Side Female Screwlock (4-40) flange and Brass contacts. Both are RoHS/ROHS3 compliant.

Q: Are all listed substitute parts RoHS compliant?

A: Yes. All substitute parts listed are either RoHS Compliant or ROHS3 Compliant. The FCE17E09PB60B is RoHS Compliant. HARTING parts 09651626817 and 09651627817 are ROHS3 Compliant. Amphenol ICC FCI Delta D series parts are either RoHS Compliant or ROHS3 Compliant as individually specified.

Q: What is the significance of contact finish thickness variations (Flash, 15.0µin, 30.0µin)?

A: Contact finish thickness affects contact durability and wear resistance. Flash plating provides minimal gold coverage for signal integrity. 15.0µin (0.38µm) and 30.0µin (0.76µm) thicknesses provide progressively enhanced contact durability for high-cycle mating applications. All thicknesses maintain electrical conductivity and are suitable for standard signal transmission applications.

Q: Can I use D09P13A6GX00LF in place of FCE17E09PB60B if my application requires extended temperature range?

A: Yes. The D09P13A6GX00LF operates across -55°C ~ 125°C, exceeding the FCE17E09PB60B operating range of -40°C ~ 85°C. Both connectors maintain identical 9-position configuration, right-angle through-hole mounting, and solder termination. The D09P13A6GX00LF features Housing/Shell (4-40) flange and 30.0µin gold contact finish thickness. ROHS3 compliance is maintained.

Q: What packaging formats are available for substitute parts?

A: The FCE17E09PB60B is supplied in standard packaging (not specified). HARTING parts 09651626817 and 09651627817 are supplied in Bulk packaging. Amphenol ICC FCI Delta D series parts (D09P13 variants) are supplied in Tray packaging. Packaging format does not affect connector functionality or electrical performance.

Q: Are there any REACH compliance differences between substitute parts?

A: Yes. The FCE17E09PB60B does not specify REACH status. HARTING parts 09651626817 and 09651627817 are REACH Unaffected. Amphenol ICC FCI Delta D series parts vary: D09P13A4GL00LF, D09P13A4GV00LF, D09P13A4GX00LF, and D09P13A4PV00LF are REACH Unaffected or REACH Affected as individually specified. REACH Affected status indicates the part contains substances of very high concern (SVHC) listed under REACH regulations. Verify REACH compliance requirements for your specific application and regulatory jurisdiction.

Q: Which substitute part offers the highest current capacity?

A: HARTING parts 09651626817 and 09651627817 support 6.5A current rating, exceeding the FCE17E09PB60B and all Amphenol ICC FCI Delta D series parts, which support 5A current rating. Select HARTING connectors for applications requiring higher current transmission capacity.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message