FCE17E09PB4DB D-Sub Plug 9 Position Right Angle Solder Connector

Part Overview

The FCE17E09PB4DB is a 9 position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This connector features male pins, right angle mounting, and through-hole solder termination. The part is currently active in production with 702 units in stock. The FCE17E09PB4DB operates across an industrial temperature range of -40°C to 85°C and is rated for 5A per contact. This connector is RoHS compliant and carries UL94 V-0 flammability certification.

Substitute parts are necessary when the original FCE17E09PB4DB becomes unavailable, when alternative flange configurations are required for specific board layouts, or when extended operating temperature ranges or higher current ratings are needed for system redesigns.

Key Parameters

Parameter	FCE17E09PB4DB Value
Connector Type	Plug, Male Pins
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating	5A
Operating Temperature	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the FCE17E09PB4DB is determined by strict adherence to the following core parameters:

Critical Parameters (Must Match Exactly):

Connector Type: Plug, Male Pins
Number of Positions: 9
Number of Rows: 2
Shell Size, Connector Layout: 1 (DE, E)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Material Flammability Rating: UL94 V-0

Allowable Variation Parameters:

Current Rating: 5A minimum (higher ratings acceptable)
Operating Temperature: -40°C to 85°C minimum range (extended ranges acceptable)
Shell Material Finish: Steel with tin or tin-nickel plating
Contact Finish: Gold plating (various thicknesses acceptable)
Flange Feature: Board side, mating side, or housing configurations
Dielectric Material: Thermoplastic or polyester-based materials
Contact Material: Phosphor bronze or brass alloys

The substitute parts listed below maintain all critical parameters while offering variations in flange configuration, contact finish thickness, operating temperature range, and current rating capacity. These variations allow system designers to select the most appropriate connector for specific application requirements without compromising electrical or mechanical compatibility.

Parameter Comparison

Parameter	FCE17E09PB4DB	09651626817	09651627817	D09P13A4GL00LF	D09P13A4GV00LF	D09P13A4GX00LF	D09P13A4PA00LF	D09P13A4PV00LF	D09P13A6GX00LF	D09P13B4PA00LF	D09P13B6GV00LF
Manufacturer	Amphenol ICC	HARTING	HARTING	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	6.5A	6.5A	5A per Contact	5A per Contact	5A per Contact	5A per Contact	5A per Contact	5A per Contact	5A per Contact	5A per Contact
Operating Temperature	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Shell Material, Finish	Steel, Tin Plated	Steel	Steel	Steel, Tin-Nickel Plated	Steel, Tin-Nickel Plated	Steel, Tin-Nickel Plated	Steel, Tin-Nickel Plated	Steel, Tin-Nickel Plated	Steel, Tin-Nickel Plated	Steel, Tin-Nickel Plated	Steel, Tin-Nickel Plated
Contact Finish	Gold	Not Specified	Not Specified	Gold	Gold	Gold	Gold	Gold	Gold or Gold, GXT™	Gold	Gold or Gold, GXT™
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Voltage Rating	Not Specified	Not Specified	Not Specified	300V	300V	300V	300V	300V	300V	300V	300V

Engineering Selection Recommendations

All listed substitute parts maintain active product status and meet the core electrical and mechanical requirements for direct substitution with the FCE17E09PB4DB. Selection among these alternatives should be based on the following criteria:

For Extended Temperature Range Applications: The HARTING parts (09651626817, 09651627817) and all Amphenol ICC Delta D series parts (D09P13 base number) support operating temperatures from -55°C to 125°C, compared to the FCE17E09PB4DB range of -40°C to 85°C. These parts are suitable for applications requiring operation beyond the original part's temperature envelope.

For Higher Current Capacity: HARTING parts 09651626817 and 09651627817 are rated for 6.5A per contact, exceeding the FCE17E09PB4DB rating of 5A. These parts accommodate higher current applications while maintaining all other electrical and mechanical compatibility.

For Compliance Requirements: All substitute parts carry UL94 V-0 flammability certification. HARTING parts and Amphenol ICC Delta D series parts D09P13A6GX00LF and D09P13B6GV00LF are ROHS3 compliant, providing enhanced regulatory coverage compared to the RoHS compliant FCE17E09PB4DB.

For Flange Configuration Flexibility: Amphenol ICC Delta D series parts offer multiple flange options: board side (D09P13A4GL00LF, D09P13A4GX00LF), mating side female screwlock (D09P13A4GV00LF, D09P13A4PV00LF, D09P13B6GV00LF), and housing/shell unthreaded (D09P13A4PA00LF, D09P13B4PA00LF). This variety accommodates different PCB mounting requirements and connector mating configurations.

For Contact Finish Specifications: Amphenol ICC Delta D series parts D09P13A6GX00LF and D09P13B6GV00LF feature enhanced gold plating at 30.0µin (0.76µm) thickness with optional GXT™ coating, compared to the FCE17E09PB4DB at 15.0µin (0.38µm). These options provide improved contact durability for high-cycle mating applications.

Frequently Asked Questions (FAQ)

Q: Can the HARTING parts 09651626817 and 09651627817 be used as direct replacements for the FCE17E09PB4DB?

A: Yes. Both HARTING parts maintain identical connector type, pin count, shell size, mounting type, and termination method. The primary differences are extended operating temperature range (-55°C to 125°C versus -40°C to 85°C), higher current rating (6.5A versus 5A), and ROHS3 compliance status. These variations represent functional enhancements rather than incompatibilities.

Q: What is the difference between the Amphenol ICC Delta D series parts and the original FCE17E09PB4DB?

A: The Delta D series (D09P13 base number) parts share the same core connector specifications but offer extended operating temperature range (-55°C to 125°C), specified voltage rating (300V), and multiple flange configuration options. The primary distinction is flange type: board side, mating side female screwlock, or housing/shell mounting. All maintain 5A per contact current rating and UL94 V-0 certification.

Q: Are there packaging differences between the FCE17E09PB4DB and substitute parts?

A: Yes. The FCE17E09PB4DB is supplied in bulk packaging. Amphenol ICC Delta D series parts are supplied in tray packaging. HARTING parts are supplied in bulk packaging. Packaging format does not affect electrical or mechanical compatibility; it impacts only storage, handling, and inventory management procedures.

Q: Which substitute part offers the best contact durability for high-cycle mating applications?

A: Parts D09P13A6GX00LF and D09P13B6GV00LF feature enhanced gold plating at 30.0µin (0.76µm) thickness with optional GXT™ coating, compared to standard gold plating at 15.0µin (0.38µm) on the FCE17E09PB4DB. The thicker plating and GXT™ enhancement provide superior wear resistance for applications requiring frequent connector mating cycles.

Q: Can I use a substitute part with a higher current rating than the FCE17E09PB4DB?

A: Yes. The HARTING parts rated for 6.5A per contact are fully compatible with applications designed for the FCE17E09PB4DB's 5A rating. Higher current capacity does not create incompatibility; it provides additional design margin. However, the application's actual current requirements remain unchanged.

Q: What is the significance of ROHS3 compliance on the substitute parts?

A: ROHS3 compliance indicates adherence to the Restriction of Hazardous Substances Directive 3, which extends regulatory coverage beyond the RoHS standard. Parts D09P13A6GX00LF and D09P13B6GV00LF carry ROHS3 certification, providing enhanced compliance documentation for applications subject to stringent environmental regulations.

Q: Are all substitute parts suitable for the same PCB mounting configurations as the FCE17E09PB4DB?

A: The FCE17E09PB4DB features board side flange mounting (4-40). Amphenol ICC Delta D series parts offer three flange options: board side (D09P13A4GL00LF, D09P13A4GX00LF), mating side female screwlock (D09P13A4GV00LF, D09P13A4PV00LF, D09P13B6GV00LF), and housing/shell unthreaded (D09P13A4PA00LF, D09P13B4PA00LF). Selection depends on specific PCB layout and connector mating requirements. HARTING parts feature mating side female screwlock configuration.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message