FCE17E09PB45B D-Sub Plug 9-Position Right Angle Solder Connector

Part Overview

The FCE17E09PB45B is a 9-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This connector features male pins, right-angle through-hole mounting, and solder termination. The part is currently active in production with 846 pieces in stock. D-Sub connectors of this configuration are essential in applications requiring standardized signal transmission interfaces with mechanical robustness and reliable electrical contact. Substitute parts are identified to address inventory availability, specific flange configurations, or enhanced operating temperature ranges while maintaining core electrical and mechanical compatibility.

Key Parameters

Parameter	FCE17E09PB45B Value	Substitution Relevance
Connector Style	D-Sub	Core connector family; all substitutes must match
Connector Type	Plug, Male Pins	Mating interface requirement; all substitutes must match
Number of Positions	9	Pin count; all substitutes must match
Shell Size, Connector Layout	1 (DE, E)	Physical form factor; all substitutes must match
Mounting Type	Through Hole, Right Angle	PCB integration method; all substitutes must match
Termination	Solder	Connection method; all substitutes must match
Current Rating (Amps)	5A	Electrical capacity; substitutes with equal or higher rating acceptable
Operating Temperature	-40°C ~ 85°C	Environmental range; substitutes with equal or wider range acceptable
Material Flammability Rating	UL94 V-0	Safety compliance; all substitutes must match or exceed
RoHS Status	RoHS Compliant	Regulatory compliance; substitutes must be RoHS or ROHS3 compliant
Backset Spacing	0.405" (10.29mm)	Mechanical tolerance; substitutes with 0.409" (10.40mm) acceptable within standard variation

Substitute Part Grouping Explanation

Substitution logic for the FCE17E09PB45B is based on strict equivalence of core mechanical and electrical parameters. All identified substitute parts maintain the following mandatory criteria:

Mandatory Matching Parameters:

Connector Style: D-Sub
Connector Type: Plug, Male Pins
Number of Positions: 9
Number of Rows: 2
Shell Size, Connector Layout: 1 (DE, E)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Material Flammability Rating: UL94 V-0

Acceptable Variation Parameters:

Current Rating: Substitutes with 5A or higher (6.5A acceptable)
Operating Temperature: Substitutes with -40°C ~ 85°C or wider range (-55°C ~ 125°C acceptable)
Backset Spacing: 0.405" (10.29mm) or 0.409" (10.40mm) within standard tolerance
Flange Feature: Board Side (4-40), Housing/Shell (4-40), Housing/Shell (M3), or Mating Side Female Screwlock (4-40)
Contact Finish: Gold or Gold GXT™ with varying thickness specifications
Shell Material Finish: Steel Tin Plated or Steel Tin-Nickel Plated
RoHS Status: RoHS Compliant or ROHS3 Compliant

Substitutes are grouped by manufacturer and specific flange configuration to facilitate selection based on application requirements and inventory availability.

Parameter Comparison

Part Number	Manufacturer	Connector Type	Positions	Mounting	Current Rating	Operating Temp	Flange Feature	RoHS Status	Inventory
FCE17E09PB45B	Amphenol ICC (Commercial Products)	Plug, Male Pins	9	Through Hole, Right Angle	5A	-40°C ~ 85°C	Board Side (4-40)	RoHS Compliant	846 Pcs
09651626817	HARTING	Plug, Male Pins	9	Through Hole, Right Angle	6.5A	-55°C ~ 125°C	Mating Side, Female Screwlock (4-40)	ROHS3 Compliant	1090 Pcs
09651627817	HARTING	Plug, Male Pins	9	Through Hole, Right Angle	6.5A	-55°C ~ 125°C	Mating Side, Female Screwlock (4-40)	ROHS3 Compliant	757 Pcs
D09P13A4GL00LF	Amphenol ICC (FCI)	Plug, Male Pins	9	Through Hole, Right Angle	5A per Contact	-55°C ~ 125°C	Housing/Shell (M3)	RoHS Compliant	1352 Pcs
D09P13A4GV00LF	Amphenol ICC (FCI)	Plug, Male Pins	9	Through Hole, Right Angle	5A per Contact	-55°C ~ 125°C	Mating Side, Female Screwlock (4-40)	RoHS Compliant	5069 Pcs
D09P13A4GX00LF	Amphenol ICC (FCI)	Plug, Male Pins	9	Through Hole, Right Angle	5A per Contact	-55°C ~ 125°C	Housing/Shell (4-40)	RoHS Compliant	1920 Pcs
D09P13A4PA00LF	Amphenol ICC (FCI)	Plug, Male Pins	9	Through Hole, Right Angle	5A per Contact	-55°C ~ 125°C	Housing/Shell (Unthreaded)	RoHS Compliant	1070 Pcs
D09P13A6GX00LF	Amphenol ICC (FCI)	Plug, Male Pins	9	Through Hole, Right Angle	5A per Contact	-55°C ~ 125°C	Housing/Shell (4-40)	ROHS3 Compliant	1363 Pcs

Engineering Selection Recommendations

Primary Substitutes (Amphenol ICC FCI Delta D Series):

The D09P13A4GX00LF, D09P13A4GV00LF, and D09P13A6GX00LF are direct functional equivalents manufactured by Amphenol ICC (FCI division). These parts maintain identical connector geometry, pin count, and electrical ratings while offering extended operating temperature range (-55°C ~ 125°C versus -40°C ~ 85°C). All three maintain RoHS or ROHS3 compliance. Selection among these three depends on flange configuration requirements:

D09P13A4GX00LF: Housing/Shell (4-40) flange, 1920 units in stock
D09P13A4GV00LF: Mating Side Female Screwlock (4-40) flange, 5069 units in stock (highest availability)
D09P13A6GX00LF: Housing/Shell (4-40) flange with enhanced gold plating (30.0µin), ROHS3 compliant, 1363 units in stock

Secondary Substitutes (Amphenol ICC FCI Delta D Series):

D09P13A4GL00LF: Housing/Shell (M3) flange variant, 1352 units in stock. Suitable for applications requiring metric thread fastening.
D09P13A4PA00LF: Housing/Shell (Unthreaded) flange variant, 1070 units in stock. Suitable for applications without threaded mounting requirements.

Alternative Manufacturer (HARTING):

The 09651626817 and 09651627817 from HARTING provide higher current capacity (6.5A versus 5A) and extended temperature range (-55°C ~ 125°C). Both feature Mating Side Female Screwlock (4-40) flanges and ROHS3 compliance. These are suitable for applications requiring enhanced electrical capacity or wider environmental operating conditions. Inventory availability is 1090 and 757 units respectively.

Compliance Considerations:

All substitute parts maintain UL94 V-0 flammability rating. RoHS compliance is maintained across all options (RoHS Compliant or ROHS3 Compliant). REACH status varies; verify REACH Affected or REACH Unaffected status against specific application requirements.

Frequently Asked Questions (FAQ)

Q: Can D09P13A4GX00LF directly replace FCE17E09PB45B in my application?

A: Yes, provided your application does not require the specific Board Side (4-40) flange configuration of the original part. The D09P13A4GX00LF features Housing/Shell (4-40) flange, which differs in mechanical mounting interface. Verify flange compatibility with your PCB layout before substitution.

Q: What is the difference between the HARTING 09651626817 and Amphenol ICC D09P13A4GX00LF?

A: Both are 9-position D-Sub plugs with right-angle solder termination. Key differences: HARTING provides 6.5A current rating versus 5A for Amphenol; HARTING features Mating Side Female Screwlock flange versus Housing/Shell flange on Amphenol; HARTING is ROHS3 compliant while Amphenol is RoHS compliant. Operating temperature ranges are equivalent (-55°C ~ 125°C for HARTING, -55°C ~ 125°C for Amphenol D09P13 series).

Q: Why does D09P13A6GX00LF have thicker gold plating (30.0µin) compared to D09P13A4GX00LF (Flash)?

A: Contact finish thickness is specified in the part number designation. The "6" in D09P13A6GX00LF indicates enhanced gold plating (30.0µin or 0.76µm) versus flash plating on the "4" variant. Enhanced plating provides improved contact durability and corrosion resistance in demanding environments. Select based on application longevity and environmental exposure requirements.

Q: Are all substitute parts available in the same packaging as FCE17E09PB45B?

A: No. FCE17E09PB45B is supplied in standard packaging (not specified). HARTING parts (09651626817, 09651627817) are supplied in Bulk packaging. Amphenol ICC FCI Delta D series parts (D09P13A4GL00LF, D09P13A4GV00LF, D09P13A4GX00LF, D09P13A4PA00LF, D09P13A6GX00LF) are supplied in Tray packaging. Verify packaging compatibility with your procurement and assembly processes.

Q: Can I use D09P13A4PA00LF (Unthreaded flange) if my application originally used Board Side (4-40)?

A: No. The Unthreaded flange on D09P13A4PA00LF is mechanically incompatible with applications designed for threaded flange mounting. Use only if your application design permits unthreaded flange configuration or if mechanical fastening is not required.

Q: What is the significance of ROHS3 compliance versus RoHS compliance?

A: ROHS3 represents compliance with the updated RoHS Directive 2011/65/EU (including the 2015 amendment). RoHS Compliant indicates compliance with the original RoHS Directive 2002/95/EC. Both certifications restrict hazardous substances; ROHS3 includes additional restricted substances. For new designs, ROHS3 compliant parts (D09P13A6GX00LF, 09651626817, 09651627817) are recommended.

Q: Is the 0.409" (10.40mm) backset spacing on substitute parts compatible with 0.405" (10.29mm) on the original FCE17E09PB45B?

A: The 0.004" (0.11mm) difference falls within standard mechanical tolerance for D-Sub connectors. Substitutes with 0.409" backset spacing are mechanically compatible with applications designed for 0.405" spacing. Verify with your mechanical design specifications if tight tolerance requirements exist.

Q: Which substitute offers the best inventory availability?

A: D09P13A4GV00LF from Amphenol ICC (FCI) offers the highest inventory with 5069 units in stock. This part features Mating Side Female Screwlock (4-40) flange, extended operating temperature (-55°C ~ 125°C), and RoHS compliance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message