FCE17C37SA6EB D-Sub 37 Position Receptacle Connector Equivalent & Substitute Parts

Part Overview

The FCE17C37SA6EB is a 37 position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This connector features female sockets in a right-angle, through-hole solder termination configuration with a shell size 4 (DC, C) layout. The connector is actively produced and stocked with 688 pieces available in new original condition.

D-Sub receptacle connectors are essential interface components in industrial, telecommunications, and data transmission applications where standardized 37-pin connections are required. Equivalent and substitute parts become necessary when the primary part experiences supply constraints, extended lead times, or when design flexibility permits component sourcing from alternative manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

FCE17C37SA6EB

Amphenol ICC (Commercial Products)In Stock: 743FCE17C37SA6EB Datasheet

Current PartRFQ

09684535613

HARTINGIn Stock: 82609684535613 Datasheet

SimilarRFQ

09684537613

HARTINGIn Stock: 118909684537613 Datasheet

SimilarRFQ

182-037-213R531

NorComp Inc.In Stock: 2635182-037-213R531 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution compatibility for the FCE17C37SA6EB is determined by strict adherence to the following critical parameters:

Mandatory Matching Parameters:

• Connector Style: D-Sub
• Connector Type: Receptacle, Female Sockets
• Number of Positions: 37
• Number of Rows: 2
• Shell Size, Connector Layout: 4 (DC, C)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Backset Spacing: 0.318" (8.08mm)

Allowable Variation Parameters:

• Current Rating: Substitute parts with equal or higher current ratings are acceptable
• Operating Temperature Range: Substitute parts with equal or wider temperature ranges are acceptable
• Contact Finish Thickness: Variations permitted within industry standards
• Flange Feature: Different flange configurations acceptable if mechanical mounting is compatible
• Shell Material Finish: Steel with different plating options acceptable
• Dielectric Material: Different thermoplastic compositions acceptable if UL94 V-0 rating maintained

The three substitute parts listed (HARTING 09684535613, HARTING 09684537613, and NorComp Inc. 182-037-213R531) meet all mandatory matching parameters and are therefore electrically and mechanically interchangeable with the FCE17C37SA6EB.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are actively produced and maintain full compliance with applicable regulatory standards. Selection among these alternatives is based on specific application requirements and availability:

HARTING 09684535613: This substitute provides enhanced current rating capability at 6.5A compared to the 5A rating of the FCE17C37SA6EB, with an extended operating temperature range of -55°C to 125°C. The contact finish specification includes gold or gold-palladium options. ROHS3 compliance and REACH unaffected status are confirmed. Inventory availability is 815 pieces.

HARTING 09684537613: This substitute offers identical electrical and mechanical specifications to the 09684535613, including 6.5A current rating and -55°C to 125°C operating temperature range. Contact finish specifications are not detailed in available documentation. ROHS3 compliance and REACH unaffected status are confirmed. Inventory availability is 1143 pieces, representing the highest stock level among substitute options.

NorComp Inc. 182-037-213R531: This substitute maintains the 5A current rating matching the FCE17C37SA6EB with an operating temperature range of -55°C to 105°C. The connector supports both panel mount and through-hole mounting configurations, providing additional design flexibility. ROHS3 compliance and REACH unaffected status are confirmed. Inventory availability is 2611 pieces, representing the highest stock level across all options including the primary part.

All substitute parts maintain the mandatory D-Sub 37-position receptacle configuration with identical shell size, backset spacing, and solder termination specifications required for direct mechanical and electrical interchangeability.

Frequently Asked Questions (FAQ)

Q: Can HARTING 09684535613 or 09684537613 be used as direct replacements for FCE17C37SA6EB in existing designs?

A: Yes. Both HARTING connectors meet all mandatory matching parameters including connector style, position count, shell size, mounting type, and backset spacing. The higher current rating (6.5A versus 5A) and extended operating temperature range (-55°C to 125°C versus -40°C to 85°C) represent performance enhancements that do not compromise compatibility.

Q: What is the difference between HARTING 09684535613 and 09684537613?

A: Both connectors share identical electrical and mechanical specifications including 6.5A current rating, -55°C to 125°C operating temperature range, and board lock features. The primary distinction is inventory availability, with 09684537613 stocked at 1143 pieces compared to 815 pieces for 09684535613.

Q: Is the NorComp Inc. 182-037-213R531 suitable for applications requiring the full -40°C to 85°C operating range of the FCE17C37SA6EB?

A: Yes. The NorComp connector operates across -55°C to 105°C, which encompasses the -40°C to 85°C range of the FCE17C37SA6EB. The extended lower temperature limit provides additional margin for cold environment applications.

Q: What are the packaging differences among these substitute parts?

A: FCE17C37SA6EB is supplied in standard packaging. HARTING 09684535613 and 09684537613 are supplied in bulk packaging. NorComp Inc. 182-037-213R531 is supplied in tray packaging. Packaging format does not affect connector functionality or interchangeability.

Q: Are all substitute parts RoHS compliant?

A: Yes. FCE17C37SA6EB carries RoHS Compliant status. All three substitute parts carry ROHS3 Compliant status, which represents an updated compliance designation. Both designations confirm lead-free construction and compliance with hazardous substance restrictions.

Q: Can the panel mount capability of NorComp 182-037-213R531 create compatibility issues?

A: No. The NorComp connector supports panel mount, through-hole, and right-angle mounting configurations. The additional panel mount capability does not restrict its use in through-hole, right-angle applications where the FCE17C37SA6EB is specified.

Q: What is the significance of the different shell material finishes?

A: FCE17C37SA6EB features tin-plated steel shell. HARTING parts feature unspecified steel finish. NorComp 182-037-213R531 features nickel-plated steel shell. All finishes provide corrosion protection suitable for standard industrial environments. Finish selection does not affect electrical performance or mechanical interchangeability.

Q: Are contact finish differences between substitute parts significant?

A: Contact finish variations (gold, gold-palladium, or unspecified) do not affect interchangeability. All finishes provide adequate signal integrity and corrosion resistance for D-Sub connector applications. Contact finish selection is determined by specific environmental and signal requirements rather than substitution compatibility.