FCE17C37SA480 D-Sub Receptacle 37-Position Equivalent & Substitute Parts

Part Overview

The FCE17C37SA480 is a 37-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This right-angle, through-hole solder termination connector features female sockets in a 2-row configuration with shell size 4 (DC, C) layout. The connector is actively produced and widely used in industrial and commercial applications requiring reliable signal transmission with board-level mounting.

Substitute parts are necessary when the primary part becomes unavailable, when alternative packaging or inventory requirements exist, or when design flexibility permits selection from qualified equivalent manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

FCE17C37SA480

Amphenol ICC (Commercial Products)In Stock: 869FCE17C37SA480 Datasheet

Current PartRFQ

FCE17C37SA490

Amphenol ICC (Commercial Products)In Stock: 1152FCE17C37SA490 Datasheet

Parametric EquivalentRFQ

09684535613

HARTINGIn Stock: 82609684535613 Datasheet

SimilarRFQ

09684537613

HARTINGIn Stock: 118909684537613 Datasheet

SimilarRFQ

182-037-213R161

NorComp Inc.In Stock: 1411182-037-213R161 Datasheet

SimilarRFQ

182-037-213R181

NorComp Inc.In Stock: 1633182-037-213R181 Datasheet

SimilarRFQ

182-037-213R531

NorComp Inc.In Stock: 2635182-037-213R531 Datasheet

SimilarRFQ

D37S33E4GX00LF

Amphenol ICC (FCI)In Stock: 1006D37S33E4GX00LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FCE17C37SA480 is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Parameters:

• Connector Type: Receptacle, Female Sockets
• Number of Positions: 37
• Number of Rows: 2
• Shell Size, Connector Layout: 4 (DC, C)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Backset Spacing: 0.318" (8.08mm)
• Material Flammability Rating: UL94 V-0

Allowable Variations:

• Current Rating: Substitute parts may equal or exceed 5A
• Operating Temperature: Substitute parts may equal or exceed the -40°C ~ 85°C range
• Shell Material Finish: Steel with Tin Plated, Nickel Plated, or Tin-Nickel Plated finishes are acceptable
• Contact Finish: Gold or Gold-Palladium finishes are acceptable
• Flange Feature: Housing/Shell or Mating Side configurations are acceptable
• Dielectric Material: Thermoplastic Glass Filled or Polybutylene Terephthalate (PBT) Glass Filled are acceptable
• Packaging: Box, Bulk, or Tray packaging formats are acceptable

All identified substitute parts meet these criteria and are qualified for direct replacement in applications where the FCE17C37SA480 is specified.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are actively produced and meet or exceed the electrical and mechanical specifications of the FCE17C37SA480. Selection among qualified substitutes should be based on the following factors:

Amphenol ICC Parts (FCE17C37SA480, FCE17C37SA490, D37S33E4GX00LF): These parts share the same manufacturer lineage and are fully compatible. FCE17C37SA490 is a parametric equivalent with identical electrical characteristics and differs only in packaging format (Box vs. standard). D37S33E4GX00LF offers extended operating temperature range (-55°C ~ 125°C) and higher voltage rating (300V), making it suitable for demanding industrial environments.

HARTING Parts (09684535613, 09684537613): Both HARTING substitutes provide higher current rating (6.5A vs. 5A) and extended operating temperature range (-55°C ~ 125°C). These parts are suitable for applications requiring enhanced thermal performance or higher current capacity. ROHS3 compliance indicates compliance with the latest RoHS directive requirements.

NorComp Parts (182-037-213R161, 182-037-213R181, 182-037-213R531): All three NorComp substitutes support panel mount configuration in addition to through-hole mounting, offering design flexibility. Operating temperature range extends to -55°C ~ 105°C. ROHS3 compliance and REACH unaffected status confirm regulatory alignment. These parts are available in highest inventory quantities (1,386 to 2,611 pieces).

All substitute parts carry UL94 V-0 flammability certification and are suitable for direct replacement in applications where the FCE17C37SA480 is currently specified.

Frequently Asked Questions (FAQ)

Q: Can FCE17C37SA490 be used as a direct replacement for FCE17C37SA480?

A: Yes. FCE17C37SA490 is a parametric equivalent with identical electrical and mechanical specifications. The only difference is packaging format (Box vs. standard). Both are manufactured by Amphenol ICC and share the same base product number (FCE17C37).

Q: What is the difference between the NorComp 182-037-213R series parts?

A: All three NorComp parts (182-037-213R161, 182-037-213R181, 182-037-213R531) are electrically and mechanically equivalent. They differ in flange feature configuration: 182-037-213R161 has Housing/Shell (Unthreaded) with Ground Strap; 182-037-213R181 has Mating Side Female Screwlock (4-40) with Ground Strap; 182-037-213R531 has Housing/Shell (4-40) with Board Lock. Selection depends on mounting and retention requirements.

Q: Are HARTING parts 09684535613 and 09684537613 interchangeable?

A: Both HARTING parts are mechanically and electrically compatible substitutes. The primary difference is that 09684535613 specifies Gold or Gold-Palladium contact finish, while 09684537613 does not specify contact finish. Both support the same current rating (6.5A) and operating temperature range (-55°C ~ 125°C).

Q: What is the advantage of D37S33E4GX00LF over the standard FCE17C37SA480?

A: D37S33E4GX00LF offers extended operating temperature range (-55°C ~ 125°C vs. -40°C ~ 85°C) and higher voltage rating (300V). It is manufactured by Amphenol ICC (FCI series) and includes mounting brackets as standard features. This part is recommended for applications requiring enhanced thermal performance or higher voltage isolation.

Q: Do all substitute parts meet RoHS compliance requirements?

A: Yes. All substitute parts are either RoHS Compliant or ROHS3 Compliant. ROHS3 represents compliance with the latest RoHS directive (Directive 2011/65/EU as amended). Both certifications confirm lead-free and restricted substance compliance.

Q: Can NorComp parts be used in panel mount applications while FCE17C37SA480 cannot?

A: NorComp parts (182-037 series) support both Panel Mount and Through Hole mounting configurations, providing additional design flexibility. The FCE17C37SA480 is specified for Through Hole, Right Angle mounting only. If panel mount capability is required, NorComp substitutes are appropriate selections.

Q: What packaging formats are available for these substitute parts?

A: FCE17C37SA480 is supplied in standard packaging; FCE17C37SA490 is supplied in Box format; HARTING parts are supplied in Bulk; NorComp parts are supplied in Tray; D37S33E4GX00LF is supplied in Tray. Packaging selection should align with procurement and inventory management requirements.