FCE17C37PB280 Equivalent & Substitute Parts

Part Overview

The FCE17C37PB280 is a 37-position D-Sub plug connector with male pins, manufactured by Amphenol ICC (Commercial Products). This right-angle, through-hole solder connector features a 2-row configuration in shell size 4 (DC, C) and is designed for signal applications. The connector is actively produced and stocked with 1075 pieces available in new original condition. Equivalent and substitute parts are identified to provide alternative sourcing options for applications requiring compatible 37-position D-Sub plug connectors with matching electrical and mechanical specifications.

Substiute Parts

FCE17C37PB280

Amphenol ICC (Commercial Products)In Stock: 1169FCE17C37PB280 Datasheet

Current PartRFQ

D37P13A4GL00LF

Amphenol ICC (FCI)In Stock: 1254D37P13A4GL00LF Datasheet

SimilarRFQ

D37P13A4GV00LF

Amphenol ICC (FCI)In Stock: 1273D37P13A4GV00LF Datasheet

SimilarRFQ

D37P13A4GX00LF

Amphenol ICC (FCI)In Stock: 1037D37P13A4GX00LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the FCE17C37PB280 are qualified based on the following critical parameters that must match or exceed the main part specifications:

Mandatory Matching Parameters:

• Connector Type: Plug, Male Pins
• Number of Positions: 37
• Number of Rows: 2
• Shell Size, Connector Layout: 4 (DC, C)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Current Rating: 5A minimum per contact
• Material Flammability Rating: UL94 V-0
• RoHS Compliance: Required

Allowable Variations:

• Shell Material Finish: Tin Plated or Tin-Nickel Plated
• Contact Finish Thickness: 15.0µin or Flash
• Backset Spacing: 0.405" to 0.409" (within tolerance)
• Operating Temperature Range: May exceed the main part range
• Dielectric Material: Thermoplastic Glass Filled or Polybutylene Terephthalate (PBT)
• Contact Material: Phosphor Bronze or Brass
• Flange Feature: Housing/Shell (Unthreaded), Housing/Shell (M3), Housing/Shell (4-40), or Mating Side Female Screwlock (4-40)

The three substitute parts (D37P13A4GL00LF, D37P13A4GV00LF, D37P13A4GX00LF) are all from the Amphenol ICC (FCI) Delta D series and satisfy all mandatory matching parameters while offering enhanced operating temperature ranges and voltage ratings.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts (D37P13A4GL00LF, D37P13A4GV00LF, D37P13A4GX00LF) are active products from Amphenol ICC (FCI) and maintain full compliance with RoHS requirements. The substitute parts provide enhanced specifications compared to the main part FCE17C37PB280:

D37P13A4GL00LF features Housing/Shell (M3) flange configuration with M3 mounting capability, extended operating temperature range of -55°C to 125°C, and 300V voltage rating. This part is RoHS Compliant and suitable for applications requiring metric mounting interfaces.

D37P13A4GV00LF provides Mating Side Female Screwlock (4-40) flange configuration for secure mating connections, identical extended operating temperature range of -55°C to 125°C, and 300V voltage rating. This part is RoHS Compliant and appropriate for applications requiring positive mating security.

D37P13A4GX00LF offers Housing/Shell (4-40) flange configuration with UNC mounting threads, extended operating temperature range of -55°C to 125°C, and 300V voltage rating. This part is ROHS3 Compliant with REACH Affected status and is suitable for applications requiring threaded mounting interfaces.

All substitute parts maintain the critical functional parameters: 37-position, 2-row configuration, shell size 4 (DC, C), through-hole right-angle solder termination, and 5A per contact current rating. The differences in flange features allow selection based on specific mechanical mounting requirements.

Frequently Asked Questions (FAQ)

Q: Can D37P13A4GL00LF, D37P13A4GV00LF, or D37P13A4GX00LF be used as direct replacements for FCE17C37PB280?

A: Yes, all three substitute parts are functionally compatible as direct replacements. They maintain identical connector type, position count, row configuration, shell size, mounting type, and termination method. The primary differences are in flange features, shell material finish, dielectric material, and contact material. Selection depends on specific mechanical mounting requirements and environmental operating conditions.

Q: What are the key differences between the three substitute parts?

A: The three substitute parts differ primarily in flange configuration: D37P13A4GL00LF features M3 mounting, D37P13A4GV00LF includes mating side female screwlock (4-40), and D37P13A4GX00LF provides housing shell (4-40) threading. All three offer identical electrical performance with 5A per contact current rating and 300V voltage rating, extended operating temperature range of -55°C to 125°C, and UL94 V-0 flammability rating.

Q: Are there any compatibility concerns with backset spacing differences?

A: The backset spacing difference between FCE17C37PB280 (0.405" / 10.29mm) and the substitute parts (0.409" / 10.40mm) represents a 0.004" (0.11mm) variation. This tolerance difference is within standard connector manufacturing specifications and does not affect functional compatibility or mating performance.

Q: What is the difference between Tin Plated and Tin-Nickel Plated shell finishes?

A: Tin Plated finish (FCE17C37PB280) provides basic corrosion resistance. Tin-Nickel Plated finish (all substitute parts) provides enhanced corrosion resistance and improved durability in harsh environmental conditions. Both finishes are suitable for standard industrial applications; Tin-Nickel Plated is preferred for extended service life or corrosive environments.

Q: How do the dielectric materials differ between the main part and substitutes?

A: FCE17C37PB280 uses Thermoplastic Glass Filled dielectric material, while all substitute parts use Polybutylene Terephthalate (PBT). Both materials meet UL94 V-0 flammability requirements. PBT offers superior chemical resistance and dimensional stability, making it suitable for demanding industrial and automotive applications.

Q: What is the significance of the contact material difference (Phosphor Bronze vs. Brass)?

A: FCE17C37PB280 uses Phosphor Bronze contacts, while substitute parts use Brass contacts. Both materials provide excellent electrical conductivity and are suitable for signal applications. Phosphor Bronze offers slightly higher spring force retention, while Brass provides superior corrosion resistance. Both are acceptable for 5A per contact applications.

Q: Are there RoHS compliance differences between the parts?

A: FCE17C37PB280 and D37P13A4GL00LF and D37P13A4GV00LF are RoHS Compliant. D37P13A4GX00LF is ROHS3 Compliant, which represents a more recent revision of the RoHS directive. All parts meet current RoHS requirements for new component procurement.

Q: What does REACH Affected status mean for D37P13A4GX00LF?

A: REACH Affected status indicates that D37P13A4GX00LF contains substances subject to REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) regulations. This requires compliance documentation and may involve additional regulatory requirements depending on application jurisdiction. D37P13A4GL00LF and D37P13A4GV00LF are listed as REACH Unaffected.

Q: Which substitute part should be selected for applications requiring the widest operating temperature range?

A: All three substitute parts provide identical extended operating temperature range of -55°C to 125°C, which exceeds the FCE17C37PB280 range of -40°C to 85°C. Selection among the three substitutes should be based on flange feature requirements rather than temperature performance.

Q: Can packaging format affect substitution decisions?

A: FCE17C37PB280 packaging format is not specified in available data. All three substitute parts are supplied in Tray packaging. Packaging format does not affect electrical or mechanical compatibility; it only impacts handling, storage, and logistics considerations.