FCE17C37PA210 D-Sub Connector Equivalent & Substitute Parts

Part Overview

The FCE17C37PA210 is a 37-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This right-angle, through-hole solder connector features male pins and is designed for signal applications in industrial and commercial equipment. The connector is currently in active production status with 1153 units in stock inventory.

Equivalent and substitute parts are necessary when the primary part number becomes unavailable, when alternative sourcing is required for supply chain optimization, or when design flexibility permits selection from multiple qualified manufacturers offering compatible D-Sub connectors with identical or superior electrical and mechanical specifications.

Substiute Parts

FCE17C37PA210

Amphenol ICC (Commercial Products)In Stock: 1247FCE17C37PA210 Datasheet

Current PartRFQ

09684635812

HARTINGIn Stock: 119409684635812 Datasheet

SimilarRFQ

182-037-113R161

NorComp Inc.In Stock: 982182-037-113R161 Datasheet

SimilarRFQ

182-037-113R181

NorComp Inc.In Stock: 1273182-037-113R181 Datasheet

SimilarRFQ

182-037-113R531

NorComp Inc.In Stock: 5425182-037-113R531 Datasheet

SimilarRFQ

D37P33E4GV00LF

Amphenol ICC (FCI)In Stock: 1167D37P33E4GV00LF Datasheet

SimilarRFQ

D37P33E4GX00LF

Amphenol ICC (FCI)In Stock: 1799D37P33E4GX00LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FCE17C37PA210 is determined by strict adherence to the following critical parameters:

Mandatory Matching Parameters:

• Connector Style: D-Sub
• Connector Type: Plug, Male Pins
• Number of Positions: 37
• Number of Rows: 2
• Shell Size, Connector Layout: 4 (DC, C)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Backset Spacing: 0.318" (8.08mm)
• Material Flammability Rating: UL94 V-0

Compatible Variation Parameters:

• Current Rating: Equal to or greater than 5A
• Shell Material Finish: Steel with various plating options (Tin, Nickel, Tin-Nickel)
• Contact Finish: Gold or Gold-Palladium
• Operating Temperature Range: Must encompass or exceed -40°C ~ 85°C
• RoHS Compliance: RoHS Compliant or ROHS3 Compliant

All substitute parts listed meet these criteria and are qualified for direct replacement in applications where the FCE17C37PA210 is specified.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Amphenol ICC FCI Series Delta D):

The D37P33E4GX00LF and D37P33E4GV00LF are direct functional equivalents manufactured by Amphenol ICC (FCI division). Both parts maintain RoHS compliance, feature identical connector geometry and pin configuration, and provide extended operating temperature ranges (-55°C ~ 125°C) that exceed the FCE17C37PA210 specification. The D37P33E4GX00LF features a housing-mounted flange with 4-40 threaded holes, while the D37P33E4GV00LF provides a mating-side female screwlock interface. Both are suitable for applications requiring the FCE17C37PA210 specification.

Secondary Substitutes (HARTING 09684635812):

The HARTING 09684635812 offers enhanced current capacity (6.5A versus 5A) and extended temperature range (-55°C ~ 125°C). This part is ROHS3 compliant and features gold or gold-palladium contact finish with increased thickness (30.0µin). The connector is suitable for applications where higher current margins or broader temperature operation is beneficial.

Tertiary Substitutes (NorComp Inc. 182 Series):

The NorComp 182-037-113R161, 182-037-113R181, and 182-037-113R531 are ROHS3 compliant alternatives with panel mount capability in addition to through-hole mounting. These connectors feature nickel-plated steel shells and brass contacts with flash gold finish. The 182-037-113R181 includes female screwlock mating interface, while 182-037-113R531 provides housing-mounted 4-40 threaded flange. All three NorComp variants operate across -55°C ~ 105°C temperature range and are suitable for applications requiring panel-mount flexibility.

All substitute parts are active production items with confirmed inventory availability and meet or exceed the electrical and mechanical requirements of the FCE17C37PA210.

Frequently Asked Questions (FAQ)

Q: Can the D37P33E4GX00LF be used as a direct replacement for the FCE17C37PA210?

A: Yes. Both connectors share identical 37-position D-Sub configuration, shell size 4 (DC, C), right-angle through-hole mounting, and solder termination. The D37P33E4GX00LF provides equivalent electrical performance with extended operating temperature range and 300V voltage rating specification.

Q: What is the difference between the D37P33E4GX00LF and D37P33E4GV00LF?

A: The primary difference is the flange feature. The D37P33E4GX00LF has a housing-mounted flange with 4-40 threaded holes for board mounting. The D37P33E4GV00LF features a mating-side female screwlock interface for cable-side connection. Both are electrically and mechanically equivalent otherwise.

Q: Are the NorComp 182 series connectors compatible with the FCE17C37PA210?

A: Yes. The NorComp 182-037-113R161, 182-037-113R181, and 182-037-113R531 are compatible substitutes. All three maintain the 37-position D-Sub configuration, shell size 4, right-angle mounting, and solder termination. The NorComp variants offer panel mount capability as an additional feature and operate across -55°C ~ 105°C temperature range.

Q: What is the significance of the contact finish thickness difference between parts?

A: Contact finish thickness affects durability and wear resistance. The FCE17C37PA210 specifies 15.0µin (0.38µm) gold finish, while the HARTING 09684635812 provides 30.0µin (0.76µm). The NorComp and Amphenol FCI Delta D series specify flash gold finish. All finishes are suitable for solder termination applications; thicker finishes provide extended contact life in high-cycle mating environments.

Q: Can I use the HARTING 09684635812 in place of the FCE17C37PA210 if my application requires higher current capacity?

A: Yes. The HARTING 09684635812 is rated for 6.5A per contact compared to the FCE17C37PA210 5A rating. This provides additional current margin while maintaining all other connector specifications and compatibility requirements.

Q: What does ROHS3 compliance mean compared to RoHS compliance?

A: ROHS3 refers to compliance with the Restriction of Hazardous Substances Directive 2011/65/EU as amended by Directive (EU) 2015/863. RoHS compliance typically refers to the original 2002/95/EC directive. Both designations indicate restriction of hazardous substances; ROHS3 represents the current regulatory standard. Parts marked ROHS3 compliant are suitable for applications requiring RoHS compliance.

Q: Are all substitute parts available in the same packaging as the FCE17C37PA210?

A: No. The FCE17C37PA210 packaging is not specified in the provided data. The HARTING 09684635812 is supplied in bulk packaging, while the NorComp 182 series and Amphenol FCI Delta D series are supplied in tray packaging. Packaging differences do not affect connector functionality or compatibility; they relate only to order quantity and storage considerations.

Q: What is the Moisture Sensitivity Level (MSL) and why does it differ between parts?

A: MSL indicates the maximum time a component can be exposed to ambient conditions before soldering. MSL 1 (Unlimited) means the component has no moisture sensitivity restrictions. The NorComp 182 series shows "Not Applicable," indicating these parts do not require moisture sensitivity classification. Both designations are acceptable for solder termination applications.

Q: Can I mix substitute parts in the same assembly?

A: Yes. All listed substitute parts are mechanically and electrically compatible with the FCE17C37PA210 and with each other. Mixing different manufacturers or part numbers in the same assembly is permissible from a technical compatibility standpoint, though design documentation should reflect the actual parts used.