FCE17B25PB6EB D-Sub Plug 25 Position Right Angle Solder Connector

Part Overview

The FCE17B25PB6EB is a 25 position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This connector features male pins, right angle mounting, and solder termination, designed for through-hole PCB applications. The connector is actively produced and maintains 700 pieces in current inventory stock.

D-Sub connectors serve as standard interconnect solutions in industrial, telecommunications, and legacy computing applications. Equivalent and substitute parts become necessary when addressing supply chain constraints, specific flange feature requirements, or compliance certifications for particular end-use applications.

Substiute Parts

FCE17B25PB6EB

Amphenol ICC (Commercial Products)In Stock: 734FCE17B25PB6EB Datasheet

Current PartRFQ

09663626817

HARTINGIn Stock: 110209663626817 Datasheet

SimilarRFQ

D25P13A4GL00LF

Amphenol ICC (FCI)In Stock: 1274D25P13A4GL00LF Datasheet

SimilarRFQ

D25P13A4GV00LF

Amphenol ICC (FCI)In Stock: 2014D25P13A4GV00LF Datasheet

SimilarRFQ

D25P13A4GX00LF

Amphenol ICC (FCI)In Stock: 3200D25P13A4GX00LF Datasheet

SimilarRFQ

D25P13A6GX00LF

Amphenol ICC (FCI)In Stock: 728D25P13A6GX00LF Datasheet

SimilarRFQ

D25P13B4PA00LF

Amphenol ICC (FCI)In Stock: 1051D25P13B4PA00LF Datasheet

SimilarRFQ

DLS3XS6AK44X

Amphenol CONECIn Stock: 1572DLS3XS6AK44X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FCE17B25PB6EB is determined by the following critical parameters:

Core Compatibility Requirements:

• Connector Type: Plug, Male Pins (25 position)
• Shell Size: 3 (DB, B)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Number of Positions: 25
• Number of Rows: 2

Acceptable Variation Parameters:

• Flange Feature (Board Side, Mating Side, Housing/Shell configurations)
• Contact Finish (Gold, Tin-Nickel Plated)
• Shell Material Finish (Steel with various plating options)
• Dielectric Material (Thermoplastic or PBT variants)
• Current Rating (5A or higher)
• Operating Temperature Range (equal to or exceeding -40°C ~ 85°C)
• RoHS and REACH compliance status

Non-Substitutable Parameters:

• Connector Type (must remain Plug, Male Pins)
• Position count and row configuration
• Shell size and layout
• Solder termination requirement

The substitute parts listed maintain electrical and mechanical compatibility while offering alternative flange configurations and material specifications suitable for different mounting and environmental requirements.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Amphenol ICC FCI Delta D Series):

The D25P13A4GL00LF, D25P13A4GV00LF, D25P13A4GX00LF, D25P13A6GX00LF, and D25P13B4PA00LF connectors are direct functional equivalents manufactured by Amphenol ICC (FCI). These parts maintain identical electrical and mechanical specifications while offering extended operating temperature ranges (-55°C ~ 125°C) and higher voltage ratings (300V). All Delta D series substitutes carry RoHS compliance certification and MSL 1 rating.

Selection among Delta D variants depends on flange feature requirements:

• D25P13A4GL00LF: Board-side M3 flange (closest to FCE17B25PB6EB mounting configuration)
• D25P13A4GV00LF: Mating-side female screwlock (4-40) for cable-side retention
• D25P13A4GX00LF: Housing/shell 4-40 threaded flange with ROHS3 compliance
• D25P13A6GX00LF: Housing/shell 4-40 flange with enhanced gold contact finish (30.0µin)
• D25P13B4PA00LF: Housing/shell unthreaded flange with polyester dielectric

Secondary Substitute (HARTING 09663626817):

The HARTING 09663626817 provides equivalent 25-position D-Sub plug functionality with higher current capacity (7.5A versus 5A) and extended temperature range (-55°C ~ 125°C). This connector features mating-side female screwlock retention and carries ROHS3 compliance. The HARTING part is suitable for applications requiring enhanced thermal performance and higher current distribution.

Non-Equivalent Part (DLS3XS6AK44X):

The DLS3XS6AK44X is a 25-position D-Sub receptacle (female sockets) manufactured by Amphenol CONEC. This part is not a substitute for the FCE17B25PB6EB plug connector due to opposite connector type (receptacle versus plug). This part is listed for reference only and serves as a mating component for plug connectors.

Frequently Asked Questions (FAQ)

Q: Can the D25P13A4GL00LF replace the FCE17B25PB6EB in existing designs?

A: Yes. The D25P13A4GL00LF maintains identical connector type (plug, male pins), position count (25), shell size (3 DB/B), mounting type (through hole, right angle), and termination method (solder). The board-side M3 flange configuration matches the FCE17B25PB6EB mounting interface. Extended operating temperature range and higher voltage rating provide enhanced performance margins.

Q: What is the difference between the D25P13A4GX00LF and D25P13A6GX00LF?

A: Both connectors share identical electrical and mechanical specifications. The primary difference is contact finish thickness: D25P13A4GX00LF uses flash gold plating, while D25P13A6GX00LF specifies 30.0µin (0.76µm) gold or gold GXT™ finish. The D25P13A6GX00LF provides enhanced contact durability for high-cycle mating applications.

Q: Why does the HARTING 09663626817 have a higher current rating (7.5A) than the FCE17B25PB6EB (5A)?

A: Current rating differences reflect design variations in contact geometry and material composition. The HARTING part uses copper alloy contacts with machined contact form, while the FCE17B25PB6EB uses phosphor bronze contacts. Both ratings are valid for their respective designs and do not indicate incompatibility.

Q: Is the DLS3XS6AK44X compatible with the FCE17B25PB6EB?

A: The DLS3XS6AK44X is a receptacle connector (female sockets), while the FCE17B25PB6EB is a plug connector (male pins). These parts are complementary mating components, not substitutes. The DLS3XS6AK44X would serve as the receiving connector for the FCE17B25PB6EB plug.

Q: What packaging format should be selected for production assembly?

A: The FCE17B25PB6EB is supplied in bulk packaging. Substitute parts from the Amphenol ICC FCI Delta D series are supplied in tray packaging, which provides improved component protection and automated handling compatibility. The HARTING 09663626817 is supplied in bulk packaging. Packaging selection depends on assembly process requirements and handling equipment specifications.

Q: Are all substitute parts RoHS compliant?

A: All listed substitute parts carry either RoHS Compliant or ROHS3 Compliant certification. The FCE17B25PB6EB carries RoHS Compliant status. ROHS3 designation indicates compliance with the most current RoHS directive revision. Both certifications satisfy RoHS requirements for new designs.

Q: What is the significance of the MSL 1 (Unlimited) rating?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture control requirements. The FCE17B25PB6EB and all listed substitutes carry this rating, eliminating the need for desiccant packaging or controlled storage environments.

Q: Can the D25P13B4PA00LF be used where the FCE17B25PB6EB specifies board-side mounting?

A: The D25P13B4PA00LF features an unthreaded housing/shell flange, which differs from the FCE17B25PB6EB board-side M3 threaded configuration. This part is suitable for applications where flange retention is not required or where alternative mechanical fastening methods are employed. Verify mechanical mounting compatibility before selection.