FCE17A15SC4D0 Equivalent & Substitute Parts

Part Overview

The FCE17A15SC4D0 is a 15-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder connector features female sockets with a 2-row (DA, A) shell size configuration. The connector is designed for signal applications with a current rating of 5A and operates across a temperature range of -40°C to 85°C. The product maintains Active status and is RoHS Compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Substitute parts are identified when equivalent D-Sub receptacle connectors share the same core functional characteristics: 15-position configuration, 2-row layout, receptacle type with female sockets, through-hole right-angle mounting, solder termination, and compatible shell size (2/DA, A). Substitutes must maintain signal contact type and comparable electrical and mechanical specifications to ensure direct replacement capability in circuit board applications.

Substiute Parts

FCE17A15SC4D0

Amphenol ICC (Commercial Products)In Stock: 836FCE17A15SC4D0 Datasheet

Current PartRFQ

5745113-2

TE Connectivity AMP ConnectorsIn Stock: 14175745113-2 Datasheet

SimilarRFQ

5745984-4

TE Connectivity AMP ConnectorsIn Stock: 11175745984-4 Datasheet

SimilarRFQ

5747837-4

TE Connectivity AMP ConnectorsIn Stock: 12155747837-4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the FCE17A15SC4D0 are qualified based on the following core parameters that determine functional equivalence:

Critical Matching Parameters:

• Connector Style: D-Sub
• Connector Type: Receptacle, Female Sockets
• Number of Positions: 15
• Number of Rows: 2
• Shell Size, Connector Layout: 2 (DA, A)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Contact Type: Signal
• Shell Material, Finish: Steel, Tin Plated
• Contact Finish: Gold
• Material Flammability Rating: UL94 V-0
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

All three substitute parts (5745113-2, 5745984-4, 5747837-4) meet these critical parameters. Variations in current rating, operating temperature range, backset spacing, contact finish thickness, and dielectric material do not preclude substitution when the application requirements fall within the substitute part specifications. All substitute parts maintain Active product status and comply with RoHS or ROHS3 standards.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts maintain Active product status and meet or exceed the electrical and mechanical specifications of the FCE17A15SC4D0. Selection among these alternatives is based on application-specific requirements and compliance certifications:

5745113-2 (TE Connectivity AMPLIMITE HDP-20): This substitute provides a 6A current rating and extended operating temperature range (-55°C to 105°C). It features ROHS3 compliance and includes mounting brackets. The backset spacing is 0.545" (13.84mm), which differs from the main part. This part is suitable for applications requiring higher current capacity and broader temperature operation.

5745984-4 (TE Connectivity AMPLIMITE HD-20): This substitute matches the backset spacing of 0.590" (14.99mm) to the main part and provides a 6A current rating with extended operating temperature range (-55°C to 105°C). It includes a ground strap feature and maintains RoHS compliance. The contact finish thickness is 30.0µin (0.76µm), compared to 15.0µin on the main part.

5747837-4 (TE Connectivity AMPLIMITE HD-20): This substitute also matches the backset spacing of 0.590" (14.99mm) and provides a 6A current rating with extended operating temperature range (-55°C to 105°C). It includes both board lock and ground strap features and maintains ROHS3 compliance. The contact finish thickness is 30.0µin (0.76µm). This part is packaged in tube format.

All substitute parts are RoHS or ROHS3 compliant and carry REACH Unaffected or equivalent status where specified. The choice between substitutes depends on specific application requirements for current capacity, temperature range, mechanical features, and packaging format.

Frequently Asked Questions (FAQ)

Q: Can the 5745113-2 substitute for the FCE17A15SC4D0 in all applications?

A: The 5745113-2 is functionally equivalent for 15-position D-Sub receptacle applications. However, the backset spacing differs (0.545" versus 0.590"), which may affect board layout compatibility. The higher current rating (6A versus 5A) and extended temperature range (-55°C to 105°C versus -40°C to 85°C) make this part suitable for applications within these enhanced specifications.

Q: What is the significance of backset spacing in D-Sub connector substitution?

A: Backset spacing defines the distance from the connector mounting surface to the rear of the connector body. The FCE17A15SC4D0 has a backset spacing of 0.590" (14.99mm). The 5745113-2 has 0.545" (13.84mm), while 5745984-4 and 5747837-4 match at 0.590" (14.99mm). Substitutes with matching backset spacing ensure direct board layout compatibility without redesign.

Q: Are there differences in dielectric material between the main part and substitutes?

A: Yes. The FCE17A15SC4D0 uses Thermoplastic, Glass Filled dielectric material. The 5745113-2 uses Polyamide (PA), Nylon, Glass Filled. The 5745984-4 and 5747837-4 use Thermoplastic dielectric material. These material differences do not affect substitution capability for signal applications within the specified operating parameters.

Q: What is the difference between RoHS and ROHS3 compliance?

A: Both RoHS and ROHS3 represent compliance with Restriction of Hazardous Substances directives. ROHS3 represents a more recent iteration of the standard. All substitute parts meet current compliance requirements. The FCE17A15SC4D0 is RoHS Compliant, while 5745113-2 and 5747837-4 are ROHS3 Compliant, and 5745984-4 is RoHS Compliant.

Q: How do the contact finish thicknesses compare?

A: The FCE17A15SC4D0 has a contact finish thickness of 15.0µin (0.38µm). The 5745984-4 and 5747837-4 both have 30.0µin (0.76µm) contact finish thickness. The 5745113-2 does not specify contact finish thickness. Thicker gold plating provides enhanced durability and corrosion resistance in high-cycle mating applications.

Q: What packaging formats are available for the substitute parts?

A: The 5745113-2 is packaged in Bulk format. The 5745984-4 is packaged in Bulk format. The 5747837-4 is packaged in Tube format. Packaging selection depends on inventory management and assembly process requirements.

Q: Do all substitute parts include mechanical features like board lock or ground strap?

A: The FCE17A15SC4D0 includes Board Lock and Filter features. The 5745113-2 includes Mounting Brackets. The 5745984-4 includes Ground Strap. The 5747837-4 includes both Board Lock and Ground Strap. Feature availability varies by part number and should be evaluated against specific application requirements.

Q: What is the current rating difference, and does it affect substitution?

A: The FCE17A15SC4D0 has a 5A current rating. All three substitute parts have a 6A current rating. A higher-rated substitute part is suitable for applications operating at or below the original part's current specification. Applications requiring exactly 5A operation are not constrained by the higher rating of substitute parts.

Q: Are the substitute parts suitable for extended temperature range applications?

A: The FCE17A15SC4D0 operates from -40°C to 85°C. All three substitute parts operate from -55°C to 105°C, providing extended temperature capability. Applications requiring operation within the original temperature range are fully compatible with substitute parts. Applications requiring extended temperature operation benefit from the substitute parts' broader range.