FCE17A15SC49B D-Sub 15 Position Receptacle Equivalent & Substitute Parts

Part Overview

The FCE17A15SC49B is a 15 position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This connector features female sockets in a right-angle, through-hole solder configuration with a 2-row (DA, A) shell layout. The part is currently active in production with 824 units in stock.

D-Sub receptacle connectors serve as mating interfaces for signal transmission in electronic assemblies. Equivalent and substitute parts become necessary when the primary part experiences supply constraints, extended lead times, or when design requirements permit alternative manufacturers that meet identical or superior electrical and mechanical specifications.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Receptacle, Female Sockets
Number of Positions	15
Number of Rows	2
Shell Size, Connector Layout	2 (DA, A)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Current Rating	5A
Backset Spacing	0.590" (14.99mm)
Material Flammability Rating	UL94 V-0
Operating Temperature Range	-40°C ~ 85°C
RoHS Status	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the FCE17A15SC49B is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

Connector Style: D-Sub
Connector Type: Receptacle, Female Sockets
Number of Positions: 15
Number of Rows: 2
Shell Size, Connector Layout: 2 (DA, A)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Contact Finish: Gold
Material Flammability Rating: UL94 V-0
Moisture Sensitivity Level: 1 (Unlimited)

Allowable Parameter Variations: Substitute parts may differ in the following parameters while maintaining functional compatibility:

Manufacturer and series designation
Shell material finish (tin plated or nickel plated)
Contact finish thickness specifications
Current rating (equal to or greater than 5A)
Operating temperature range (equal to or exceeding -40°C ~ 85°C)
Backset spacing (within connector design tolerance)
Flange feature configuration (board side, mating side, or housing/shell)
Dielectric material composition (thermoplastic or polyamide variants)
Contact material (phosphor bronze or brass)
RoHS compliance status (RoHS Compliant or ROHS3 Compliant)

All three substitute parts meet these criteria and are qualified for direct substitution in applications where the FCE17A15SC49B is specified.

Parameter Comparison

Parameter	FCE17A15SC49B (Amphenol ICC)	183-015-213R541 (NorComp Inc.)	5745113-2 (TE Connectivity)	5745984-4 (TE Connectivity)
Connector Style	D-Sub	D-Sub	D-Sub	D-Sub
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	15	15	15	15
Number of Rows	2	2	2	2
Shell Size, Connector Layout	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)
Mounting Type	Through Hole, Right Angle	Panel Mount, Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder
Shell Material, Finish	Steel, Tin Plated	Steel, Nickel Plated	Steel, Tin Plated	Steel, Tin Plated
Contact Finish	Gold	Gold	Gold	Gold
Contact Finish Thickness	15.0µin (0.38µm)	Flash	Not specified	30.0µin (0.76µm)
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Current Rating (Amps)	5A	5A	6A	6A
Backset Spacing	0.590" (14.99mm)	0.590" (14.99mm)	0.545" (13.84mm)	0.590" (14.99mm)
Operating Temperature Range	-40°C ~ 85°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C
Contact Material	Phosphor Bronze	Brass	Phosphor Bronze	Phosphor Bronze
Dielectric Material	Thermoplastic, Glass Filled	Polyamide (PA9T), Nylon 9T	Polyamide (PA), Nylon, Glass Filled	Thermoplastic
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active	Active
Inventory (Pcs)	824	1110	1354	1105

Engineering Selection Recommendations

All three substitute parts are qualified alternatives to the FCE17A15SC49B based on compliance and product status criteria.

183-015-213R541 (NorComp Inc.): This part maintains identical position count, shell layout, and backset spacing to the primary part. It carries ROHS3 Compliant status and REACH Unaffected designation. The connector includes panel mount capability in addition to through-hole mounting. Operating temperature range extends to -55°C ~ 105°C, exceeding the primary part specification. Current rating matches at 5A. Inventory availability is 1110 units. The nickel-plated steel shell and polyamide dielectric material represent acceptable material variations within D-Sub receptacle standards.

5745113-2 (TE Connectivity AMP Connectors, AMPLIMITE HDP-20 Series): This part provides 6A current rating, exceeding the primary part's 5A specification. It carries ROHS3 Compliant status and REACH Unaffected designation. Operating temperature range extends to -55°C ~ 105°C. Inventory availability is 1354 units. The backset spacing of 0.545" (13.84mm) represents a minor variation from the primary part's 0.590" (14.99mm). Voltage rating of 125V is specified. Phosphor bronze contact material matches the primary part.

5745984-4 (TE Connectivity AMP Connectors, AMPLIMITE HD-20 Series): This part provides 6A current rating, exceeding the primary part's 5A specification. It carries RoHS Compliant status and REACH Unaffected designation. Operating temperature range extends to -55°C ~ 105°C. Backset spacing of 0.590" (14.99mm) matches the primary part exactly. Inventory availability is 1105 units. Contact finish thickness of 30.0µin (0.76µm) exceeds the primary part's 15.0µin (0.38µm). Voltage rating of 125V is specified. Phosphor bronze contact material matches the primary part.

Frequently Asked Questions (FAQ)

Q: Can the 183-015-213R541 be used as a direct replacement for the FCE17A15SC49B?

A: Yes. Both connectors share identical position count (15), row configuration (2), shell layout (2 DA, A), mounting type (through hole, right angle), termination method (solder), and gold contact finish. The nickel-plated steel shell and polyamide dielectric material are acceptable variations. The extended operating temperature range (-55°C ~ 105°C) and ROHS3 compliance provide equivalent or superior performance characteristics.

Q: What is the significance of the backset spacing difference in the 5745113-2?

A: Backset spacing defines the distance from the connector mounting surface to the contact plane. The 5745113-2 specifies 0.545" (13.84mm) compared to the primary part's 0.590" (14.99mm). This 0.045" (1.15mm) difference may affect PCB layout and mating connector positioning. Verify PCB design compatibility before substitution.

Q: Are there differences in current rating between the primary part and substitutes?

A: The FCE17A15SC49B is rated for 5A. Both TE Connectivity substitutes (5745113-2 and 5745984-4) are rated for 6A. The higher current rating of the substitutes does not create incompatibility; it indicates enhanced current-carrying capacity. The 183-015-213R541 maintains the 5A rating.

Q: How do the contact finish thickness specifications compare?

A: The FCE17A15SC49B specifies 15.0µin (0.38µm) gold plating. The 5745984-4 specifies 30.0µin (0.76µm), providing double the thickness. The 183-015-213R541 specifies flash plating. All three finishes provide adequate gold contact protection for signal transmission applications. Thicker plating in the 5745984-4 may offer extended contact life in high-cycle mating applications.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant status?

A: RoHS Compliant indicates conformance to the original Restriction of Hazardous Substances directive. ROHS3 Compliant indicates conformance to the updated RoHS 3 directive (2015/863/EU), which includes additional restricted substances. Both statuses satisfy environmental compliance requirements. ROHS3 Compliant parts meet current regulatory standards.

Q: Can the 183-015-213R541 be used in panel mount applications?

A: Yes. The 183-015-213R541 supports panel mount, through hole, and right-angle mounting configurations. The primary part FCE17A15SC49B supports through hole and right-angle mounting only. If panel mount capability is required, the 183-015-213R541 provides this additional functionality.

Q: Are all substitute parts available in the same packaging as the primary part?

A: No. The FCE17A15SC49B packaging is not specified in the provided data. The 183-015-213R541 is packaged in trays. Both TE Connectivity parts (5745113-2 and 5745984-4) are packaged in bulk. Verify packaging requirements for your procurement and assembly processes.

Q: What is the operating temperature range difference, and does it matter?

A: The FCE17A15SC49B operates from -40°C to 85°C. All three substitutes operate from -55°C to 105°C, providing a wider temperature envelope. If your application operates within the primary part's range, the substitutes are fully compatible. If your application requires extended temperature operation, the substitutes provide additional capability.

Q: Do all parts meet UL94 V-0 flammability requirements?

A: Yes. All four parts (primary and three substitutes) carry UL94 V-0 material flammability rating, indicating compliance with flame propagation standards for electronic components.

Q: What contact material differences exist between the parts?

A: The FCE17A15SC49B and both TE Connectivity substitutes use phosphor bronze contacts. The 183-015-213R541 uses brass contacts. Both materials provide adequate electrical conductivity and contact reliability for D-Sub signal applications. Phosphor bronze offers slightly superior spring characteristics and wear resistance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message