FCC17E09SC6EB D-Sub 9 Position Receptacle Equivalent & Substitute Parts

Part Overview

The FCC17E09SC6EB is a 9 Position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder termination connector features female sockets with a board-side M3 flange and is rated for 5A at 200V. The part is classified as obsolete, necessitating identification of active equivalent and substitute components for ongoing design and procurement requirements.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Receptacle, Female Sockets
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Current Rating	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Material Flammability Rating	UL94 V-0
Contact Material	Phosphor Bronze
Backset Spacing	0.590" (14.99mm)
Flange Feature	Board Side (M3)
Color	Black
Dielectric Material	Thermoplastic
Contact Form	Machined
RoHS Status	RoHS non-compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the FCC17E09SC6EB is determined by strict equivalence across the following critical parameters:

Primary Substitution Criteria:

Connector style (D-Sub)
Connector type (Receptacle, Female Sockets)
Number of positions (9)
Number of rows (2)
Shell size and layout (1 / DE, E)
Mounting type (Through Hole, Right Angle)
Termination method (Solder)
Flange feature type and location
Current rating (5A minimum)
Operating temperature range (-40°C ~ 85°C minimum)
Material flammability rating (UL94 V-0)
Moisture sensitivity level (1)

Amphenol ICC FCE17 Series (FCE17E09SC6EB, FCE17E09SC60B, FCE17E09SC61B, FCE17E09SC64B, FCE17E09SC65B, FCE17E09SC68B, FCE17E09SC6DB) represent direct parametric equivalents with active product status and RoHS compliance. These parts maintain identical mechanical and electrical specifications with the exception of dielectric material composition (Thermoplastic, Glass Filled versus Thermoplastic) and voltage rating documentation.

HARTING 09661136602 and 09661526610 are similar D-Sub 9 position receptacles with through-hole right-angle solder termination. These parts differ in backset spacing (0.409" versus 0.590"), flange feature configuration, contact form (stamped versus machined), and operating temperature range, requiring design verification for mechanical fit and thermal performance.

Parameter Comparison

Parameter	FCC17E09SC6EB	FCE17E09SC6EB	FCE17E09SC60B	FCE17E09SC61B	FCE17E09SC64B	FCE17E09SC65B	FCE17E09SC68B	FCE17E09SC6DB	09661136602	09661526610
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	9	9	9	9	9	9	9	9	9	9
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not Specified	Not Specified
Contact Finish Thickness	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	Not Specified	Not Specified
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Voltage Rating	200V	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Backset Spacing	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.409" (10.40mm)	0.409" (10.40mm)
Flange Feature	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Housing/Shell (4-40)	Housing/Shell (Unthreaded)
Color	Black	Black	Black	Black	Black	Black	Black	Black	Not Specified	Not Specified
Dielectric Material	Thermoplastic	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled
Contact Form	Machined	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Stamped	Stamped
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active
Inventory Availability	809 Pcs	1039 Pcs	1124 Pcs	1113 Pcs	1122 Pcs	843 Pcs	1045 Pcs	662 Pcs	629 Pcs	751 Pcs

Engineering Selection Recommendations

Amphenol ICC FCE17 Series Equivalents (FCE17E09SC6EB, FCE17E09SC60B, FCE17E09SC61B, FCE17E09SC64B, FCE17E09SC65B, FCE17E09SC68B, FCE17E09SC6DB):

These parts are direct parametric equivalents to the FCC17E09SC6EB with active product status. All FCE17 variants maintain identical mechanical dimensions, electrical ratings, and flange configurations. The primary distinction is RoHS compliance status: all FCE17 variants are RoHS Compliant, whereas the FCC17E09SC6EB is RoHS non-compliant. For new designs or applications requiring regulatory compliance, the FCE17 series is the appropriate selection. Dielectric material composition differs (Glass Filled thermoplastic versus standard thermoplastic), which may affect mechanical properties in high-temperature or high-stress applications. Voltage rating documentation is not specified for FCE17 variants; applications requiring explicit 200V rating confirmation should reference manufacturer datasheets.

HARTING 09661136602:

This connector is suitable for applications where the 0.409" backset spacing and housing-mounted flange configuration are compatible with existing PCB layouts. The higher current rating (6.5A versus 5A) and extended operating temperature range (-55°C ~ 125°C) provide enhanced performance margins. The stamped contact form differs from the machined contacts of the FCC17E09SC6EB, affecting contact resistance and durability characteristics. ROHS3 compliance is confirmed.

HARTING 09661526610:

This connector features board lock functionality and unthreaded housing flange mounting. The 0.409" backset spacing and stamped contact form require mechanical compatibility verification. Current rating and temperature range specifications match those of 09661136602. ROHS3 compliance is confirmed.

Frequently Asked Questions (FAQ)

Q: Can the FCE17E09SC6EB series parts be used as direct replacements for the FCC17E09SC6EB?

A: The FCE17E09SC6EB, FCE17E09SC60B, FCE17E09SC61B, FCE17E09SC64B, FCE17E09SC65B, FCE17E09SC68B, and FCE17E09SC6DB maintain identical mechanical and electrical specifications with the FCC17E09SC6EB. All share the same 9-position D-Sub layout, 0.590" backset spacing, board-side M3 flange, 5A current rating, and -40°C ~ 85°C operating temperature range. The primary difference is RoHS compliance status. Direct substitution is supported from an electrical and mechanical standpoint.

Q: What is the significance of the backset spacing difference between Amphenol and HARTING parts?

A: Backset spacing defines the distance from the rear of the connector shell to the solder tail termination points. The FCC17E09SC6EB and FCE17 series specify 0.590" (14.99mm), while HARTING 09661136602 and 09661526610 specify 0.409" (10.40mm). This difference directly affects PCB layout and through-hole positioning. Connectors with different backset spacing cannot be interchanged without PCB redesign.

Q: Are the HARTING connectors compatible with existing FCC17/FCE17 designs?

A: HARTING 09661136602 and 09661526610 are not direct mechanical replacements due to backset spacing differences (0.409" versus 0.590") and flange feature configuration differences (housing-mounted versus board-side M3). Additionally, the flange feature type differs: HARTING parts use housing/shell-mounted flanges (4-40 threaded or unthreaded) versus the board-side M3 configuration of Amphenol parts. PCB redesign is required for HARTING connector integration.

Q: What is the difference between machined and stamped contact forms?

A: The FCC17E09SC6EB uses machined contacts, while HARTING alternatives use stamped contacts. Machined contacts are individually formed from solid material, providing superior contact resistance stability and durability under high-cycle mating/unmating operations. Stamped contacts are formed from sheet material, offering cost advantages but potentially higher contact resistance variation and reduced cycle life. Contact form selection depends on application requirements for contact reliability and insertion cycle count.

Q: Does the dielectric material composition affect connector performance?

A: The FCC17E09SC6EB uses standard thermoplastic dielectric material, while FCE17 variants specify thermoplastic with glass filling. Glass-filled dielectric materials provide improved mechanical strength, dimensional stability, and thermal performance at elevated temperatures. For applications operating near the upper temperature limit (-40°C ~ 85°C) or subject to mechanical stress, glass-filled dielectric materials offer enhanced reliability. Standard thermoplastic is adequate for standard operating conditions.

Q: What is the inventory status for each equivalent part?

A: Current inventory levels are: FCC17E09SC6EB (809 Pcs), FCE17E09SC6EB (1039 Pcs), FCE17E09SC60B (1124 Pcs), FCE17E09SC61B (1113 Pcs), FCE17E09SC64B (1122 Pcs), FCE17E09SC65B (843 Pcs), FCE17E09SC68B (1045 Pcs), FCE17E09SC6DB (662 Pcs), 09661136602 (629 Pcs), and 09661526610 (751 Pcs). All parts are available in new original condition.

Q: Is RoHS compliance required for my application?

A: RoHS compliance requirements depend on application jurisdiction and customer specifications. The FCC17E09SC6EB is RoHS non-compliant, while all FCE17 variants and HARTING parts are RoHS Compliant or ROHS3 Compliant. For applications subject to EU RoHS Directive 2011/65/EU or equivalent regulations, RoHS-compliant parts are mandatory. For legacy or non-regulated applications, RoHS status may not be a selection criterion.

Q: What is the voltage rating for FCE17 variants?

A: Voltage rating is not specified in the provided documentation for FCE17E09SC6EB, FCE17E09SC60B, FCE17E09SC61B, FCE17E09SC64B, FCE17E09SC65B, FCE17E09SC68B, and FCE17E09SC6DB. The FCC17E09SC6EB specifies 200V. For applications requiring explicit voltage rating confirmation, manufacturer datasheets or technical specifications should be consulted.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message