FCC17E09SC65B D-Sub 9-Position Receptacle Equivalent & Substitute Parts

Part Overview

The FCC17E09SC65B is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC, featuring right-angle through-hole solder termination with board-side M3 flange mounting. This connector is classified as obsolete, which necessitates identification of active equivalent and substitute parts for ongoing design support and procurement continuity. The part maintains signal-grade contact specifications with gold-plated phosphor bronze contacts rated for 5A at 200V across an operating temperature range of -40°C to 85°C.

Key Parameters

Parameter	Specification
Connector Type	D-Sub Receptacle, Female Sockets
Number of Positions	9
Shell Size / Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Flange Feature	Board Side (M3)
Current Rating	5A
Voltage Rating	200V
Operating Temperature	-40°C to 85°C
Shell Material / Finish	Steel, Tin Plated
Contact Finish	Gold, 15.0µin (0.38µm)
Contact Material	Phosphor Bronze
Flammability Rating	UL94 V-0
RoHS Status	RoHS Non-Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the FCC17E09SC65B is determined by strict alignment across the following critical parameters:

Mandatory Matching Parameters:

Connector type: D-Sub receptacle, female sockets
Number of positions: 9
Shell size and layout: 1 (DE, E)
Mounting type: Through hole, right angle
Termination method: Solder
Flange feature: Board side M3
Current rating: 5A minimum
Operating temperature range: -40°C to 85°C minimum
Flammability rating: UL94 V-0

Allowable Variations:

Contact finish thickness (provided gold plating is maintained)
Dielectric material composition (thermoplastic vs. glass-filled variants)
Voltage rating (200V or unspecified, provided 5A current capacity is maintained)
Contact form (machined vs. stamped)
RoHS compliance status (non-compliant to compliant represents design improvement)

The substitute parts are grouped into two categories: direct Amphenol ICC FCE17 series equivalents with active product status, and cross-manufacturer alternatives from HARTING that maintain core electrical and mechanical compatibility.

Parameter Comparison

Part Number	Manufacturer	Series	Product Status	Positions	Shell Size	Mounting	Termination	Current (A)	Voltage (V)	Temp Range (°C)	Contact Finish	RoHS	Inventory (Pcs)
FCC17E09SC65B	Amphenol ICC	FCC17	Obsolete	9	1 (DE, E)	Through Hole, R/A	Solder	5	200	-40 to 85	Gold	Non-Compliant	995
FCE17E09SC65B	Amphenol ICC	FCE17	Active	9	1 (DE, E)	Through Hole, R/A	Solder	5	—	-40 to 85	Gold	Compliant	843
FCE17E09SC60B	Amphenol ICC	FCE17	Active	9	1 (DE, E)	Through Hole, R/A	Solder	5	—	-40 to 85	Gold	Compliant	1124
FCE17E09SC61B	Amphenol ICC	FCE17	Active	9	1 (DE, E)	Through Hole, R/A	Solder	5	—	-40 to 85	Gold	Compliant	1113
FCE17E09SC64B	Amphenol ICC	FCE17	Active	9	1 (DE, E)	Through Hole, R/A	Solder	5	—	-40 to 85	Gold	Compliant	1122
FCE17E09SC68B	Amphenol ICC	FCE17	Active	9	1 (DE, E)	Through Hole, R/A	Solder	5	—	-40 to 85	Gold	Compliant	1045
FCE17E09SC69B	Amphenol ICC	FCE17	Active	9	1 (DE, E)	Through Hole, R/A	Solder	5	—	-40 to 85	Gold	Compliant	914
FCE17E09SC6DB	Amphenol ICC	FCE17	Active	9	1 (DE, E)	Through Hole, R/A	Solder	5	—	-40 to 85	Gold	Compliant	662
FCE17E09SC6EB	Amphenol ICC	FCE17	Active	9	1 (DE, E)	Through Hole, R/A	Solder	5	—	-40 to 85	Gold	Compliant	1039
09661136602	HARTING	—	Active	9	1 (DE, E)	Through Hole, R/A	Solder	6.5	—	-55 to 125	—	ROHS3 Compliant	629
09661526610	HARTING	—	Active	9	1 (DE, E)	Through Hole, R/A	Solder	6.5	—	-55 to 125	—	ROHS3 Compliant	751

Engineering Selection Recommendations

Primary Substitutes (Amphenol ICC FCE17 Series):

The FCE17E09SC65B, FCE17E09SC60B, FCE17E09SC61B, FCE17E09SC64B, FCE17E09SC68B, FCE17E09SC69B, FCE17E09SC6DB, and FCE17E09SC6EB represent direct functional equivalents to the obsolete FCC17E09SC65B. All FCE17 variants maintain identical mechanical and electrical specifications across connector type, position count, shell size, mounting configuration, and termination method. The primary distinction is product status: all FCE17 parts are active, ensuring long-term availability and supply chain continuity. Additionally, all FCE17 variants achieve RoHS compliance, representing a regulatory improvement over the non-compliant FCC17E09SC65B. Inventory levels across the FCE17 range are robust, with quantities ranging from 662 to 1124 pieces.

Secondary Substitutes (HARTING Cross-Manufacturer):

The HARTING parts 09661136602 and 09661526610 provide cross-manufacturer alternatives that maintain core D-Sub 9-position receptacle architecture with right-angle through-hole solder termination. These parts exceed the original specification in current rating (6.5A vs. 5A) and operating temperature range (-55°C to 125°C vs. -40°C to 85°C), providing enhanced performance margins. Both HARTING alternatives carry ROHS3 compliance certification. Mechanical differences include stamped contact form (vs. machined in the original) and alternative flange mounting configurations. These parts are suitable for applications where extended thermal operating range and higher current capacity provide design benefits.

Frequently Asked Questions (FAQ)

Q: Can FCE17E09SC65B directly replace FCC17E09SC65B in existing designs?

A: Yes. The FCE17E09SC65B maintains identical connector type, position count, shell size, mounting method, and termination specification. The part is mechanically and electrically interchangeable. The primary advantage is active product status and RoHS compliance.

Q: What is the difference between the multiple FCE17 variants (SC60B, SC61B, SC64B, SC68B, SC69B, SC6DB, SC6EB)?

A: All FCE17 variants listed share identical electrical and mechanical specifications as documented in the parameter comparison table. Differences in the part number suffix (60B, 61B, 64B, 68B, 69B, 6DB, 6EB) reflect internal manufacturing or material variations not specified in the provided technical data. Selection among these variants should be based on inventory availability and internal design documentation requirements.

Q: Are HARTING 09661136602 and 09661526610 suitable for direct substitution?

A: These HARTING parts maintain D-Sub 9-position receptacle configuration with right-angle through-hole solder termination and board-side flange mounting. They are functionally compatible for applications requiring 9-position D-Sub connectivity. However, they differ in contact form (stamped vs. machined), flange mounting detail (housing/shell vs. board side M3), and contact finish specification. Verification against specific application requirements is necessary before implementation.

Q: What is the significance of RoHS compliance in these substitutes?

A: The original FCC17E09SC65B is RoHS non-compliant. All Amphenol ICC FCE17 variants and HARTING alternatives are RoHS compliant, meeting current regulatory requirements for electronic component procurement in regulated markets. This represents a design improvement and eliminates potential supply chain restrictions.

Q: How do operating temperature ranges affect part selection?

A: The original FCC17E09SC65B operates from -40°C to 85°C. All Amphenol ICC FCE17 substitutes maintain this identical range. HARTING alternatives extend the range to -55°C to 125°C, providing enhanced thermal performance for applications requiring extended operating conditions. Selection should align with actual application temperature requirements.

Q: What is the difference between board-side M3 flange and housing/shell flange mounting?

A: Board-side M3 flange (original and Amphenol ICC FCE17 parts) provides M3 threaded mounting directly to the PCB. Housing/shell flange (HARTING 09661136602) and unthreaded housing/shell flange (HARTING 09661526610) provide alternative mechanical mounting configurations. PCB layout and mechanical assembly requirements determine compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message