FCC17E09SC610 D-Sub Receptacle Equivalent & Substitute Parts

Part Overview

The FCC17E09SC610 is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder-terminated connector features female sockets with gold-plated phosphor bronze contacts and a tin-plated steel shell. The connector is classified as obsolete, necessitating identification of active equivalent and substitute parts for ongoing design and procurement requirements. Equivalent parts maintain full electrical and mechanical compatibility, while substitute parts satisfy the core functional requirements within specified parameter tolerances.

Key Parameters

Parameter	Value
Connector Type	D-Sub Receptacle, Female Sockets
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating	5A
Voltage Rating	200V
Operating Temperature Range	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Material	Phosphor Bronze
Contact Finish	Gold
Flange Feature	Housing/Shell (M3)
Features	Board Lock, Filter
Material Flammability Rating	UL94 V-0
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the FCC17E09SC610 is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Parameters:

Connector type: D-Sub receptacle, female sockets
Number of positions: 9
Number of rows: 2
Shell size and layout: 1 (DE, E)
Current rating: 5A minimum
Voltage rating: 200V minimum
Operating temperature range: -40°C to 85°C minimum

Mechanical Compatibility Parameters:

Mounting type: Through hole, right angle
Termination method: Solder
Shell material: Steel with tin plating
Contact material: Phosphor bronze
Contact finish: Gold plating
Flange feature: Housing/Shell with M3 specification
Features: Board lock and filter functionality

Compliance Parameters:

Material flammability: UL94 V-0
Moisture sensitivity level: 1 (Unlimited)
ECCN classification: EAR99
HTSUS code: 8536.69.4040

Substitute parts are grouped into two categories: Amphenol ICC FCE17 series equivalents (active status, RoHS compliant) and alternative manufacturer options (HARTING) that maintain functional compatibility within specified parameter ranges.

Parameter Comparison

Parameter	FCC17E09SC610	FCE17E09SC610	FCE17E09SC600	FCE17E09SC640	FCE17E09SC650	FCE17E09SC680	FCE17E09SC690	FCE17E09SC6D0	FCE17E09SC6E0	09661136602	09661526610
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
Connector Type	D-Sub Receptacle, Female Sockets	D-Sub Receptacle, Female Sockets	D-Sub Receptacle, Female Sockets	D-Sub Receptacle, Female Sockets	D-Sub Receptacle, Female Sockets	D-Sub Receptacle, Female Sockets	D-Sub Receptacle, Female Sockets	D-Sub Receptacle, Female Sockets	D-Sub Receptacle, Female Sockets	D-Sub Receptacle, Female Sockets	D-Sub Receptacle, Female Sockets
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not Specified	Not Specified
Contact Finish Thickness	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	Not Specified	Not Specified
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Operating Temperature Range	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
RoHS Status	RoHS Non-Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
ECCN	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99
HTSUS Code	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040
Inventory Status	758 Pcs	765 Pcs	847 Pcs	746 Pcs	1004 Pcs	1114 Pcs	849 Pcs	681 Pcs	1060 Pcs	629 Pcs	751 Pcs

Engineering Selection Recommendations

Primary Equivalent Selection: Amphenol ICC FCE17 Series

The FCE17E09SC610, FCE17E09SC600, FCE17E09SC640, FCE17E09SC650, FCE17E09SC680, FCE17E09SC690, FCE17E09SC6D0, and FCE17E09SC6E0 represent direct parametric equivalents to the obsolete FCC17E09SC610. All eight parts maintain identical electrical and mechanical specifications across connector type, position count, shell size, mounting configuration, current rating, and operating temperature range. The primary distinction is product status: all FCE17 variants are active, whereas the FCC17E09SC610 is obsolete.

A critical compliance advantage of the FCE17 series is RoHS compliance status. The FCC17E09SC610 is RoHS non-compliant, while all FCE17 variants are RoHS compliant. This distinction is significant for applications subject to RoHS directives and for long-term supply chain sustainability. The FCE17 series maintains the same contact finish specifications (gold plating at 15.0µin thickness) and dielectric material composition (thermoplastic, glass-filled).

Secondary Substitute Selection: HARTING Alternatives

The HARTING 09661136602 and 09661526610 connectors provide functional substitution with the following considerations:

The 09661136602 features a 4-40 flange specification compared to the M3 specification of the FCC17E09SC610. The 09661526610 features an unthreaded flange. Both HARTING parts exceed the current rating requirement (6.5A versus 5A) and provide an extended operating temperature range (-55°C to 125°C versus -40°C to 85°C). Both are ROHS3 compliant and maintain the UL94 V-0 flammability rating.

Backset spacing differs between manufacturers: the FCC17E09SC610 specifies 0.590" (14.99mm), while HARTING parts specify 0.409" (10.40mm). This dimensional difference requires mechanical verification for PCB layout compatibility. Contact material differs (phosphor bronze in Amphenol versus copper alloy in HARTING), and HARTING contact finish specifications are not provided in the available data.

Compliance and Regulatory Considerations

All listed parts share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications, indicating equivalent export control and tariff treatment. All parts maintain MSL 1 (Unlimited) moisture sensitivity rating, eliminating moisture-related handling constraints.

For applications requiring RoHS compliance, the FCE17 series is the appropriate selection. For applications with extended temperature requirements or higher current capacity, HARTING alternatives provide enhanced specifications, subject to mechanical compatibility verification.

Frequently Asked Questions (FAQ)

Q: Can FCE17E09SC610 directly replace FCC17E09SC610 without design modification?

A: Yes. The FCE17E09SC610 maintains identical electrical and mechanical specifications across all critical parameters: 9-position D-Sub receptacle configuration, through-hole right-angle solder termination, 5A current rating, 200V voltage rating, -40°C to 85°C operating temperature, M3 flange specification, and board lock/filter features. The primary difference is product status (active versus obsolete) and RoHS compliance (compliant versus non-compliant).

Q: What is the difference between the multiple FCE17E09SC6XX variants?

A: All FCE17E09SC6XX variants (SC600, SC610, SC640, SC650, SC680, SC690, SC6D0, SC6E0) maintain identical electrical and mechanical specifications. The suffix designations reflect internal manufacturing or configuration codes that do not affect functional compatibility. All variants are active, RoHS compliant, and suitable for direct substitution of the FCC17E09SC610.

Q: Are HARTING 09661136602 and 09661526610 fully compatible with FCC17E09SC610?

A: HARTING parts provide functional substitution with design verification requirements. Electrical compatibility is maintained (9-position D-Sub receptacle, solder termination, UL94 V-0 rating). Mechanical compatibility requires verification of backset spacing (HARTING: 0.409" versus Amphenol: 0.590") and flange configuration (HARTING: 4-40 or unthreaded versus Amphenol: M3). HARTING parts exceed current and temperature specifications, providing enhanced performance margins.

Q: What is the significance of RoHS compliance status?

A: RoHS (Restriction of Hazardous Substances) compliance indicates the connector meets EU Directive 2011/65/EU restrictions on lead, cadmium, mercury, and other hazardous substances. The FCC17E09SC610 is RoHS non-compliant; all FCE17 variants and HARTING alternatives are RoHS compliant or ROHS3 compliant. For applications subject to RoHS requirements or for supply chain continuity, RoHS-compliant alternatives are required.

Q: How do contact finish specifications affect connector selection?

A: The FCC17E09SC610 specifies gold contact finish at 15.0µin (0.38µm) thickness, providing corrosion resistance and reliable electrical contact. All FCE17 variants maintain identical gold plating specifications. HARTING parts do not specify contact finish in available documentation. For applications requiring documented contact finish specifications, Amphenol FCE17 variants provide specification continuity.

Q: What inventory considerations apply to substitute part selection?

A: Current inventory levels are: FCC17E09SC610 (758 pcs), FCE17E09SC650 (1004 pcs), FCE17E09SC680 (1114 pcs), FCE17E09SC6E0 (1060 pcs), and other FCE17 variants (681-849 pcs). HARTING alternatives show lower inventory (629-751 pcs). For immediate procurement, FCE17E09SC680 and FCE17E09SC6E0 offer highest availability.

Q: Are there any export control or tariff implications for substitute selection?

A: All listed parts share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications, indicating equivalent export control treatment and tariff categorization. No regulatory advantage exists between Amphenol and HARTING alternatives from an export control or tariff perspective.

Q: What is the operating temperature range difference between FCC17E09SC610 and HARTING alternatives?

A: The FCC17E09SC610 and all FCE17 variants specify -40°C to 85°C operating range. HARTING 09661136602 and 09661526610 specify -55°C to 125°C, providing extended low-temperature and high-temperature capability. For applications operating within the -40°C to 85°C range, both specifications are equivalent. For applications requiring extended temperature range, HARTING alternatives provide enhanced performance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message