FCC17E09SC600 D-Sub Receptacle Equivalent & Substitute Parts

Part Overview

The FCC17E09SC600 is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder-terminated connector features female sockets with gold-plated phosphor bronze contacts and a tin-plated steel shell. The connector is classified as obsolete, necessitating identification of active equivalent and substitute parts for ongoing design and procurement requirements. Equivalent parts maintain identical electrical and mechanical specifications, while substitute parts provide functional alternatives within acceptable parameter tolerances for D-Sub receptacle applications.

Key Parameters

Parameter	FCC17E09SC600 Specification
Connector Type	Receptacle, Female Sockets
Number of Positions	9
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating	5A
Voltage Rating	200V
Operating Temperature Range	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold, 15.0µin (0.38µm)
Contact Material	Phosphor Bronze
Flange Feature	Housing/Shell (M3)
Features	Board Lock, Filter
Material Flammability Rating	UL94 V-0
Dielectric Material	Thermoplastic
RoHS Status	RoHS non-compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitute parts for the FCC17E09SC600 are grouped based on the following critical parameters that determine functional compatibility:

Primary Substitution Criteria:

Connector Type: Receptacle, Female Sockets
Number of Positions: 9
Shell Size, Connector Layout: 1 (DE, E)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Current Rating: 5A or greater
Operating Temperature Range: Must encompass -40°C ~ 85°C
Material Flammability Rating: UL94 V-0

Amphenol ICC FCE17 Series (Active Equivalents): Parts FCE17E09SC610, FCE17E09SC640, FCE17E09SC650, FCE17E09SC680, FCE17E09SC690, FCE17E09SC6D0, and FCE17E09SC6E0 are parametric equivalents from the active FCE17 series. These parts maintain identical electrical and mechanical specifications to the FCC17E09SC600, with the primary distinction being RoHS compliance status (RoHS Compliant) and dielectric material composition (Thermoplastic, Glass Filled). The FCE17E09SC600 variant is also available as a direct series upgrade.

HARTING Series (Cross-Manufacturer Substitutes): Parts 09661136602 and 09661526610 from HARTING provide functional substitution with variations in backset spacing, contact material composition, and operating temperature range. These parts accommodate the core application requirements while introducing different mechanical and thermal characteristics.

Parameter Comparison

Parameter	FCC17E09SC600	FCE17E09SC600	FCE17E09SC610	FCE17E09SC640	FCE17E09SC650	FCE17E09SC680	FCE17E09SC690	FCE17E09SC6D0	FCE17E09SC6E0	09661136602	09661526610
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Operating Temperature Range	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Not Specified	Not Specified
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

Amphenol ICC FCE17 Series Selection (Preferred):

The FCE17E09SC600, FCE17E09SC610, FCE17E09SC640, FCE17E09SC650, FCE17E09SC680, FCE17E09SC690, FCE17E09SC6D0, and FCE17E09SC6E0 connectors are direct parametric equivalents to the obsolete FCC17E09SC600. All FCE17 variants maintain identical electrical specifications (5A current rating, 200V voltage rating) and mechanical configuration (9-position, DE/E shell size, through-hole right-angle mounting). The primary advantage of FCE17 series selection is RoHS compliance status, which aligns with current regulatory requirements for electronic component procurement. These parts are all active products with established supply availability.

HARTING Cross-Manufacturer Substitutes:

The HARTING 09661136602 and 09661526610 connectors provide functional substitution for applications where cross-manufacturer sourcing is required. These parts maintain the core D-Sub 9-position receptacle configuration with through-hole right-angle solder termination. The HARTING variants offer extended operating temperature range (-55°C ~ 125°C) compared to the FCC17E09SC600 (-40°C ~ 85°C), providing thermal margin for demanding environments. Current rating is increased to 6.5A, exceeding the original 5A specification. Backset spacing differs at 0.409" (10.40mm) versus the original 0.590" (14.99mm), requiring mechanical verification for PCB layout compatibility. Contact material composition differs (Copper Alloy versus Phosphor Bronze), which may affect contact resistance characteristics in specific applications.

Compliance Considerations:

Selection between Amphenol ICC FCE17 variants and HARTING alternatives should account for RoHS compliance requirements. FCE17 series parts are RoHS Compliant, while HARTING parts are ROHS3 Compliant. Both certifications satisfy current regulatory frameworks. The FCC17E09SC600 is RoHS non-compliant and should not be specified for new designs subject to RoHS directives.

Frequently Asked Questions (FAQ)

Q: Can FCE17E09SC600 directly replace FCC17E09SC600 in existing designs?

A: Yes. The FCE17E09SC600 is a direct parametric equivalent with identical electrical and mechanical specifications. The primary differences are product status (active versus obsolete) and RoHS compliance. No design modifications are required for substitution.

Q: What is the difference between the various FCE17E09SC6XX variants?

A: All FCE17E09SC6XX variants (SC610, SC640, SC650, SC680, SC690, SC6D0, SC6E0) share identical electrical and mechanical specifications. The suffix designations reflect internal manufacturing or configuration variations not detailed in the provided specifications. Selection among these variants should be based on availability and supply chain requirements.

Q: Are HARTING 09661136602 and 09661526610 direct replacements?

A: HARTING connectors provide functional substitution with notable parameter differences. Backset spacing is reduced from 0.590" to 0.409", requiring PCB layout verification. Operating temperature range is extended (-55°C ~ 125°C versus -40°C ~ 85°C). Current rating is increased to 6.5A. Contact material differs (Copper Alloy versus Phosphor Bronze). These differences necessitate engineering evaluation for specific applications.

Q: What is the significance of the backset spacing difference in HARTING parts?

A: Backset spacing defines the distance from the connector mounting surface to the contact plane. The HARTING reduction from 0.590" to 0.409" affects PCB layout and mating connector positioning. Designs utilizing the original FCC17E09SC600 with 0.590" backset spacing require mechanical verification before substituting HARTING parts with 0.409" backset spacing.

Q: Which substitute part should be selected for new designs?

A: For new designs, Amphenol ICC FCE17E09SC600 is the recommended selection. This part provides direct parametric equivalence to the obsolete FCC17E09SC600 while offering active product status and RoHS compliance. FCE17 series variants (SC610, SC640, SC650, SC680, SC690, SC6D0, SC6E0) are interchangeable alternatives with identical specifications.

Q: Are there voltage rating differences between substitute parts?

A: The FCC17E09SC600 specifies 200V voltage rating. FCE17 series variants do not specify voltage rating in the provided data. HARTING parts do not specify voltage rating. For applications requiring explicit voltage rating confirmation, contact the manufacturer for detailed specifications.

Q: What is the significance of the dielectric material change in FCE17 variants?

A: The FCC17E09SC600 uses Thermoplastic dielectric material, while FCE17 variants use Thermoplastic, Glass Filled composition. Glass-filled thermoplastic provides enhanced mechanical strength and thermal stability. This change does not affect electrical performance for standard D-Sub applications and represents an improvement in material properties.

Q: Can FCC17E09SC600 be used in new designs despite obsolete status?

A: The FCC17E09SC600 is classified as obsolete, indicating discontinued manufacturing and limited supply availability. New designs should specify active equivalent parts (FCE17 series) to ensure long-term supply chain reliability and compliance with current regulatory requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message