FCC17E09SC4EB D-Sub 9 Position Receptacle Equivalent & Substitute Parts

Part Overview

The FCC17E09SC4EB is a 9 position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This connector features right-angle through-hole solder termination with female sockets, designed for signal applications. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for ongoing production and field replacement applications.

Key Parameters

Parameter	FCC17E09SC4EB
Connector Type	Receptacle, Female Sockets
Number of Positions	9
Shell Size / Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Shell Material / Finish	Steel, Tin Plated
Contact Finish	Gold, 15.0µin (0.38µm)
Flange Feature	Board Side (4-40)
Backset Spacing	0.590" (14.99mm)
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS non-compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the FCC17E09SC4EB is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Connector Type: Receptacle, Female Sockets
Number of Positions: 9
Shell Size / Layout: 1 (DE, E)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Current Rating: 5A
Operating Temperature: -40°C ~ 85°C
Shell Material / Finish: Steel, Tin Plated
Contact Finish: Gold, 15.0µin (0.38µm)
Flange Feature: Board Side (4-40)
Backset Spacing: 0.590" (14.99mm)
Material Flammability Rating: UL94 V-0

Acceptable Variations:

Product Status: Active alternatives are preferred over obsolete status
RoHS Compliance: RoHS compliant alternatives are acceptable
Dielectric Material: Thermoplastic or Thermoplastic, Glass Filled are functionally equivalent
Contact Form: Machined or Stamped contact forms are acceptable
Voltage Rating: Specifications equal to or exceeding 200V are acceptable

Substitute parts from Amphenol ICC (Commercial Products) within the FCE17 series meet all mandatory parameters while offering active product status and RoHS compliance. The HARTING 09661526610 and 09661136602 provide functional equivalence with differing backset spacing and flange configurations, limiting direct interchangeability.

Parameter Comparison

Parameter	FCC17E09SC4EB	FCE17E09SC4EB	FCE17E09SC40B	FCE17E09SC41B	FCE17E09SC44B	FCE17E09SC45B	FCE17E09SC48B	FCE17E09SC49B	FCE17E09SC4DB	09661526610	09661136602
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Shell Size / Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Shell Material / Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Not Specified	Not Specified
Flange Feature	Board Side (4-40)	Board Side (4-40)	Board Side (4-40)	Board Side (4-40)	Board Side (4-40)	Board Side (4-40)	Board Side (4-40)	Board Side (4-40)	Board Side (4-40)	Housing/Shell (Unthreaded)	Housing/Shell (4-40)
Backset Spacing	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.409" (10.40mm)	0.409" (10.40mm)
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

Primary Substitutes (Amphenol ICC FCE17 Series):

The FCE17E09SC4EB, FCE17E09SC40B, FCE17E09SC41B, FCE17E09SC44B, FCE17E09SC45B, FCE17E09SC48B, FCE17E09SC49B, and FCE17E09SC4DB are direct parametric equivalents to the FCC17E09SC4EB. All variants maintain identical electrical and mechanical specifications across connector type, position count, shell size, mounting configuration, termination method, current rating, operating temperature range, shell material finish, contact finish specifications, flange configuration, and backset spacing. These parts are manufactured by Amphenol ICC (Commercial Products) and carry active product status with RoHS compliance, addressing the obsolescence of the original FCC17E09SC4EB.

Secondary Alternatives (HARTING):

The HARTING 09661526610 and 09661136602 provide functional D-Sub 9 position receptacle solutions with through-hole right-angle solder termination. These parts differ in backset spacing (0.409" versus 0.590"), flange configuration, and contact finish specifications. The HARTING parts support higher current ratings (6.5A) and extended operating temperature ranges (-55°C ~ 125°C), with ROHS3 compliance. These alternatives are suitable only when board layout accommodates the reduced backset spacing and when the flange configuration is compatible with the application.

Compliance Considerations:

The original FCC17E09SC4EB is RoHS non-compliant. All Amphenol ICC FCE17 series substitutes are RoHS compliant, meeting current regulatory requirements for new designs and production. HARTING alternatives carry ROHS3 compliance status.

Frequently Asked Questions (FAQ)

Q: Can FCE17E09SC4EB directly replace FCC17E09SC4EB in existing designs?

A: Yes. The FCE17E09SC4EB maintains identical electrical and mechanical parameters to the FCC17E09SC4EB, including connector type, position count, shell size, mounting configuration, termination method, current rating, voltage rating, operating temperature range, shell material finish, contact finish specifications, flange configuration, and backset spacing. The primary difference is product status (active versus obsolete) and RoHS compliance.

Q: What is the difference between the multiple FCE17E09SC variants?

A: All FCE17E09SC variants (SC40B, SC41B, SC44B, SC45B, SC48B, SC49B, SC4DB) maintain identical electrical and mechanical specifications. Differences exist in packaging configuration and internal design details not specified in the provided parameters. Selection among these variants depends on specific procurement requirements and packaging preferences.

Q: Are HARTING 09661526610 and 09661136602 direct replacements?

A: No. While these HARTING parts provide 9 position D-Sub receptacle functionality with through-hole right-angle solder termination, they differ in backset spacing (0.409" versus 0.590"), flange configuration, and contact finish specifications. These parts are suitable only when board layout and mechanical constraints accommodate the reduced backset spacing and alternative flange design.

Q: What is backset spacing and why does it matter?

A: Backset spacing is the distance from the rear of the connector shell to the solder pins. The FCC17E09SC4EB and all Amphenol ICC FCE17 variants specify 0.590" (14.99mm) backset spacing. HARTING alternatives specify 0.409" (10.40mm). This parameter directly affects board layout and component placement. Connectors with different backset spacing are not interchangeable without board redesign.

Q: Can I use a part with higher current rating as a substitute?

A: Yes. The HARTING alternatives support 6.5A current rating compared to the 5A rating of the FCC17E09SC4EB. A connector rated for higher current can safely carry lower current loads. However, other parameters including backset spacing and flange configuration must remain compatible with the application.

Q: What does RoHS compliance mean for this connector?

A: RoHS (Restriction of Hazardous Substances) compliance indicates the connector meets regulatory requirements restricting lead, cadmium, mercury, and other hazardous materials. The original FCC17E09SC4EB is RoHS non-compliant. All Amphenol ICC FCE17 series substitutes are RoHS compliant, meeting current environmental and regulatory standards for new production and designs.

Q: Are there packaging differences between substitute parts?

A: Yes. FCE17E09SC44B is specified with Box packaging, while other FCE17 variants and the original FCC17E09SC4EB do not specify packaging type. HARTING 09661526610 and 09661136602 are specified as Bulk packaging. Packaging differences do not affect connector functionality but may impact procurement, storage, and handling procedures.

Q: What is the operating temperature range difference between Amphenol and HARTING parts?

A: The FCC17E09SC4EB and all Amphenol ICC FCE17 variants operate from -40°C to 85°C. HARTING alternatives operate from -55°C to 125°C, providing extended temperature capability. For applications within the -40°C to 85°C range, both options are functionally equivalent. For applications requiring extended temperature operation, HARTING alternatives provide additional margin.

Q: Can I mix connector types from different manufacturers in the same application?

A: Connector selection should prioritize parametric equivalence across all critical specifications. While Amphenol ICC and HARTING parts provide functional D-Sub 9 position receptacle solutions, differences in backset spacing, flange configuration, and contact finish specifications may create compatibility issues. Consistent manufacturer selection within a single application is recommended.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message