Request Quote
(Ships tomorrow)
FCC17E09SC41B D-Sub 9 Position Receptacle Equivalent & Substitute Parts
Part Overview
The FCC17E09SC41B is a 9 position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder termination connector features female sockets with a board-side flange and is designed for signal applications. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain functional and electrical compatibility for ongoing production and repair applications.
Substiute Parts
Key Parameters
| Parameter | FCC17E09SC41B |
|---|---|
| Connector Type | Receptacle, Female Sockets |
| Number of Positions | 9 |
| Shell Size | 1 (DE, E) |
| Mounting Type | Through Hole, Right Angle |
| Termination | Solder |
| Current Rating | 5A |
| Voltage Rating | 200V |
| Operating Temperature | -40°C ~ 85°C |
| Shell Material | Steel, Tin Plated |
| Contact Finish | Gold, 15.0µin (0.38µm) |
| Flange Feature | Board Side (4-40) |
| Material Flammability Rating | UL94 V-0 |
| RoHS Status | RoHS non-compliant |
Substitute Part Grouping Explanation
Substitution of the FCC17E09SC41B is determined by strict equivalence across the following critical parameters:
Primary Substitution Criteria:
- Connector type: Receptacle, Female Sockets
- Number of positions: 9
- Shell size: 1 (DE, E)
- Mounting type: Through Hole, Right Angle
- Termination method: Solder
- Flange feature: Board Side (4-40)
- Current rating: 5A minimum
- Operating temperature range: -40°C ~ 85°C minimum
- Shell material: Steel with tin plating
- Contact finish: Gold plating
- Material flammability: UL94 V-0
Substitution Categories:
Category 1: Direct Amphenol ICC Equivalents (Active Status) Parts FCE17E09SC41B, FCE17E09SC40B, FCE17E09SC44B, FCE17E09SC45B, FCE17E09SC48B, FCE17E09SC49B, FCE17E09SC4DB, and FCE17E09SC4EB are active production alternatives from the same manufacturer. These parts maintain identical mechanical and electrical specifications to the obsolete FCC17E09SC41B, with the primary distinction being RoHS compliance status (all active variants are RoHS compliant) and dielectric material composition (thermoplastic with glass filling in active variants versus standard thermoplastic in the original).
Category 2: Cross-Manufacturer Alternatives (HARTING) Parts 09661136602 and 09661526610 from HARTING provide functional equivalence with notable parameter variations. These alternatives maintain the 9-position D-Sub receptacle configuration, through-hole right-angle mounting, and solder termination. Differences include higher current rating (6.5A versus 5A), different backset spacing (0.409" versus 0.590"), stamped contact form versus machined, and extended operating temperature range (-55°C ~ 125°C).
Parameter Comparison
| Parameter | FCC17E09SC41B | FCE17E09SC41B | FCE17E09SC40B | FCE17E09SC44B | FCE17E09SC45B | FCE17E09SC48B | FCE17E09SC49B | FCE17E09SC4DB | FCE17E09SC4EB | 09661136602 | 09661526610 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | HARTING | HARTING |
| Connector Type | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets |
| Number of Positions | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 |
| Shell Size | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) |
| Mounting Type | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle |
| Termination | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder |
| Current Rating (Amps) | 5A | 5A | 5A | 5A | 5A | 5A | 5A | 5A | 5A | 6.5A | 6.5A |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -55°C ~ 125°C | -55°C ~ 125°C |
| Shell Material, Finish | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel | Steel |
| Contact Finish | Gold, 15.0µin | Gold, 15.0µin | Gold, 15.0µin | Gold, 15.0µin | Gold, 15.0µin | Gold, 15.0µin | Gold, 15.0µin | Gold, 15.0µin | Gold, 15.0µin | Not specified | Not specified |
| Flange Feature | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Housing/Shell (4-40) | Housing/Shell (Unthreaded) |
| Material Flammability Rating | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 |
| RoHS Status | RoHS non-compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | ROHS3 Compliant | ROHS3 Compliant |
| Product Status | Obsolete | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active |
Engineering Selection Recommendations
Primary Recommendation: Amphenol ICC FCE Series (FCE17E09SC41B, FCE17E09SC40B, FCE17E09SC44B, FCE17E09SC45B, FCE17E09SC48B, FCE17E09SC49B, FCE17E09SC4DB, FCE17E09SC4EB)
The FCE17 series variants are the preferred substitutes for the obsolete FCC17E09SC41B. These parts are manufactured by the same supplier (Amphenol ICC) and maintain complete mechanical and electrical compatibility. All FCE17 variants are in active production status with robust inventory availability (904 to 1209 pieces in stock). The primary advantage of these alternatives is RoHS compliance, which is mandatory for new designs and many production environments. The dielectric material composition differs (thermoplastic with glass filling versus standard thermoplastic), but this change is within acceptable engineering parameters and does not affect functional performance in the specified operating range of -40°C to 85°C.
Secondary Recommendation: HARTING 09661136602 and 09661526610
HARTING alternatives provide functional equivalence with enhanced electrical performance characteristics. The 6.5A current rating exceeds the original 5A specification, providing additional design margin. These parts are ROHS3 compliant and feature extended operating temperature range (-55°C to 125°C). The backset spacing difference (0.409" versus 0.590") and flange configuration variations (housing/shell mounted versus board side) require mechanical design verification before implementation. These alternatives are suitable for applications where enhanced thermal performance or higher current capacity is beneficial.
Compliance Considerations:
For new production requiring RoHS compliance, all Amphenol ICC FCE17 variants and HARTING alternatives satisfy regulatory requirements. The original FCC17E09SC41B is non-compliant and unsuitable for new designs subject to RoHS directives. For legacy system repairs or non-regulated applications, the FCC17E09SC41B remains available in inventory (867 pieces).
Frequently Asked Questions (FAQ)
Q: Can FCE17E09SC41B directly replace FCC17E09SC41B without design changes?
A: Yes. The FCE17E09SC41B maintains identical mechanical mounting, electrical ratings, and connector interface specifications. The part is a direct form-fit-function replacement. The primary difference is RoHS compliance status and dielectric material composition, neither of which affects electrical performance within the specified operating range.
Q: What is the difference between the various FCE17E09SC4xB variants?
A: All FCE17E09SC4xB variants (SC40B, SC41B, SC44B, SC45B, SC48B, SC49B, SC4DB, SC4EB) share identical electrical and mechanical specifications. The suffix letter designates internal contact plating or shell finish variations that do not affect functional compatibility. Selection among these variants depends on specific packaging requirements or internal contact material preferences.
Q: Are HARTING 09661136602 and 09661526610 fully compatible with FCC17E09SC41B?
A: These HARTING parts provide functional equivalence with noted parameter differences. The 9-position D-Sub receptacle configuration, through-hole right-angle mounting, and solder termination are identical. However, the backset spacing differs (0.409" versus 0.590"), and the flange mounting configuration varies (housing/shell versus board side). Mechanical board layout verification is required before substitution. The higher current rating (6.5A) and extended temperature range (-55°C to 125°C) are beneficial enhancements.
Q: What is the significance of the dielectric material change in FCE17 variants?
A: The FCE17 series uses thermoplastic with glass filling, compared to standard thermoplastic in the FCC17E09SC41B. Glass-filled dielectric materials provide improved mechanical strength and thermal stability. This change does not affect electrical performance within the specified operating temperature range (-40°C to 85°C) and is a standard industry practice for improved reliability.
Q: Which substitute part has the highest inventory availability?
A: FCE17E09SC44B has the highest inventory level with 1209 pieces in stock, followed by FCE17E09SC40B with 1062 pieces. Both are suitable for immediate procurement without lead time constraints.
Q: Is RoHS compliance required for my application?
A: RoHS compliance is mandatory for products sold in the European Union and many other regulated markets. If your application is subject to RoHS directives, the original FCC17E09SC41B (non-compliant) cannot be used in new designs. All Amphenol ICC FCE17 variants and HARTING alternatives are RoHS compliant and suitable for regulated applications.
Q: What is the difference between board-side and housing/shell flange mounting?
A: Board-side flange mounting (FCC17E09SC41B and FCE17 variants) positions the mounting holes on the connector body adjacent to the circuit board surface. Housing/shell mounting (HARTING 09661136602 and 09661526610) positions mounting holes on the connector shell itself. This affects mechanical board layout and requires design verification before substitution.
Q: Can I use HARTING parts as a direct replacement without PCB modification?
A: No. The HARTING alternatives have different backset spacing (0.409" versus 0.590") and flange mounting configuration. PCB layout modification is required to accommodate these dimensional differences. Verify mounting hole locations and connector positioning before implementation.
Q: What is the contact form difference between machined and stamped contacts?
A: The FCC17E09SC41B uses machined contacts (precision-formed from solid material), while HARTING alternatives use stamped contacts (formed from sheet material). Both contact types provide equivalent electrical performance and reliability. Stamped contacts are typically more cost-effective for high-volume production.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts