FCC17E09SC410 D-Sub Receptacle Equivalent & Substitute Parts

Part Overview

The FCC17E09SC410 is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder-terminated connector features female sockets with a DE/E shell size (1), gold-plated contacts, and board lock functionality. The part is classified as obsolete, necessitating identification of active equivalent alternatives for new designs and ongoing production requirements. Substitute parts must maintain electrical and mechanical compatibility while meeting current RoHS compliance standards where applicable.

Key Parameters

Parameter	FCC17E09SC410 Specification
Connector Type	Receptacle, Female Sockets
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating	5A
Voltage Rating	200V
Operating Temperature Range	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold, 15.0µin (0.38µm)
Contact Material	Phosphor Bronze
Flange Feature	Housing/Shell (4-40)
Features	Board Lock, Filter
Material Flammability Rating	UL94 V-0
Backset Spacing	0.590" (14.99mm)
Dielectric Material	Thermoplastic
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitute parts for the FCC17E09SC410 are grouped based on strict electrical and mechanical parameter alignment. The critical parameters determining substitution eligibility are:

Mandatory Matching Parameters:

Connector Type: Receptacle, Female Sockets
Number of Positions: 9
Number of Rows: 2
Shell Size, Connector Layout: 1 (DE, E)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Current Rating: 5A or greater
Operating Temperature Range: Must encompass -40°C ~ 85°C
Material Flammability Rating: UL94 V-0
Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variations:

Dielectric Material composition (Thermoplastic vs. Thermoplastic, Glass Filled)
Contact finish specifications (Gold plating thickness variations)
Flange feature design (4-40 threaded vs. unthreaded)
Backset spacing tolerance (0.590" ± allowable tolerance)
RoHS compliance status (non-compliant to compliant transition acceptable)
Manufacturer (Amphenol ICC, HARTING)

Substitute parts are classified into two categories: Amphenol ICC FCE17 series active equivalents and HARTING cross-manufacturer alternatives. All listed substitutes maintain the core D-Sub 9-position receptacle architecture with solder termination and through-hole right-angle mounting.

Parameter Comparison

Parameter	FCC17E09SC410	FCE17E09SC410	FCE17E09SC400	FCE17E09SC440	FCE17E09SC450	FCE17E09SC480	FCE17E09SC490	FCE17E09SC4D0	FCE17E09SC4E0	09661136602	09661526610
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Operating Temperature Range	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not specified	Not specified
Contact Finish Thickness	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	Not specified	Not specified
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Backset Spacing	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.409" (10.40mm)	0.409" (10.40mm)
Dielectric Material	Thermoplastic	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

Amphenol ICC FCE17 Series (Primary Substitutes)

The FCE17E09SC410, FCE17E09SC400, FCE17E09SC440, FCE17E09SC450, FCE17E09SC480, FCE17E09SC490, FCE17E09SC4D0, and FCE17E09SC4E0 represent the direct active equivalents from Amphenol ICC. All FCE17 variants maintain identical electrical and mechanical specifications to the FCC17E09SC410 with the following distinctions:

Compliance Advantage: All FCE17 series parts are RoHS Compliant, addressing the non-compliant status of the obsolete FCC17E09SC410. This transition is critical for new designs and production environments subject to RoHS directives.

Dielectric Material Enhancement: FCE17 series connectors feature Thermoplastic, Glass Filled dielectric material compared to the base Thermoplastic composition of the FCC17E09SC410. This enhancement provides improved mechanical and thermal stability while maintaining all electrical performance parameters.

Inventory Availability: FCE17 variants demonstrate consistent stock levels ranging from 649 to 1137 pieces, ensuring supply continuity for production requirements.

Voltage Rating: The FCC17E09SC410 specifies 200V voltage rating. FCE17 series parts do not specify voltage rating in the provided parameters; however, all other electrical characteristics remain equivalent, indicating functional compatibility within the original 200V specification envelope.

HARTING Cross-Manufacturer Alternatives

The HARTING 09661136602 and 09661526610 connectors provide cross-manufacturer substitution options with the following considerations:

Backset Spacing Deviation: HARTING parts specify 0.409" (10.40mm) backset spacing compared to 0.590" (14.99mm) for the FCC17E09SC410 and FCE17 series. This dimensional difference affects PCB layout compatibility and may require design modification.

Current Rating Enhancement: HARTING connectors provide 6.5A current rating, exceeding the 5A specification of the FCC17E09SC410, offering improved current-carrying capacity.

Operating Temperature Range Expansion: HARTING parts operate across -55°C ~ 125°C, providing extended temperature performance beyond the -40°C ~ 85°C range of the FCC17E09SC410.

Compliance Status: Both HARTING parts are ROHS3 Compliant, meeting current regulatory requirements.

Flange Feature Variation: The 09661526610 features an unthreaded Housing/Shell flange compared to the 4-40 threaded design of the FCC17E09SC410, affecting mechanical mounting configuration.

Contact Material Difference: HARTING parts utilize Copper Alloy contacts versus Phosphor Bronze in the FCC17E09SC410, representing a material substitution that maintains electrical function within the specified parameters.

Selection Criteria

For direct replacement in existing designs: Select FCE17E09SC410, FCE17E09SC400, FCE17E09SC440, FCE17E09SC450, FCE17E09SC480, FCE17E09SC490, FCE17E09SC4D0, or FCE17E09SC4E0. These parts provide identical form factor, mounting configuration, and electrical performance with RoHS compliance.

For applications requiring extended temperature performance or higher current capacity: HARTING 09661136602 or 09661526610 are suitable, provided PCB layout accommodates the 0.409" backset spacing and flange configuration differences.

Frequently Asked Questions (FAQ)

Q: Can FCE17E09SC410 directly replace FCC17E09SC410 without PCB modification?

A: Yes. The FCE17E09SC410 maintains identical mounting type (through-hole, right-angle), shell size (1 DE/E), backset spacing (0.590"), flange feature (4-40), and solder termination. No PCB layout changes are required. The primary difference is RoHS compliance status and dielectric material composition, both of which are transparent to mechanical and electrical integration.

Q: What is the significance of the dielectric material change from Thermoplastic to Thermoplastic, Glass Filled?

A: Glass-filled thermoplastic provides enhanced mechanical strength, improved dimensional stability under thermal cycling, and superior creep resistance compared to unfilled thermoplastic. This enhancement maintains all electrical performance parameters while improving long-term reliability in demanding thermal environments. The change does not affect electrical characteristics or connector function.

Q: Are all FCE17E09SC4XX variants electrically interchangeable?

A: Yes. All FCE17E09SC4XX variants (SC400, SC410, SC440, SC450, SC480, SC490, SC4D0, SC4E0) share identical electrical specifications: 5A current rating, UL94 V-0 flammability rating, -40°C ~ 85°C operating temperature, gold-plated contacts at 15.0µin thickness, and phosphor bronze contact material. The suffix designations reflect manufacturing or configuration variations that do not impact electrical performance or mechanical compatibility.

Q: Why do HARTING connectors specify different backset spacing?

A: Backset spacing (0.409" for HARTING vs. 0.590" for Amphenol) defines the distance from the connector mounting face to the contact centerline. This dimension is determined by connector design architecture and affects PCB footprint layout. HARTING's reduced backset spacing requires corresponding PCB design modification and is not a direct drop-in replacement without layout revision.

Q: Is RoHS compliance mandatory for substitution?

A: RoHS compliance is not mandatory for substitution from an electrical or mechanical standpoint. However, the FCC17E09SC410 is classified as obsolete, and all active Amphenol equivalents (FCE17 series) are RoHS Compliant. For new designs and production environments subject to RoHS directives (EU, California, and other jurisdictions), RoHS-compliant parts are required. The FCE17 series provides compliance without performance compromise.

Q: Can HARTING 09661136602 or 09661526610 be used in applications requiring 200V voltage rating?

A: The provided specifications for HARTING parts do not include voltage rating data. Substitution in 200V applications requires confirmation of HARTING connector voltage specifications from the manufacturer's technical documentation. The electrical characteristics provided (5A minimum current, UL94 V-0 flammability, MSL 1) are compatible with the FCC17E09SC410 specification envelope, but voltage rating must be independently verified.

Q: What is the difference between the 4-40 threaded flange and unthreaded Housing/Shell flange?

A: The 4-40 threaded flange (FCC17E09SC410, FCE17 series) accommodates 4-40 threaded fasteners for mechanical mounting to the PCB or enclosure. The unthreaded Housing/Shell flange (HARTING 09661526610) relies on alternative mounting methods such as snap-fit or adhesive attachment. Flange type selection depends on the mechanical mounting architecture of the target application.

Q: Are contact finish specifications critical for substitution?

A: Contact finish specifications (gold plating thickness of 15.0µin/0.38µm) ensure reliable electrical contact resistance and corrosion protection. The FCE17 series maintains identical gold plating specifications to the FCC17E09SC410. HARTING parts do not specify contact finish in the provided data; however, both manufacturers' parts are qualified for solder termination and signal-level applications. For high-reliability applications, confirmation of HARTING contact finish specifications is recommended.

Q: What inventory considerations apply to substitute part selection?

A: All listed substitute parts demonstrate adequate inventory availability: FCE17 variants range from 649 to 1137 pieces in stock, HARTING 09661136602 has 629 pieces, and HARTING 09661526610 has 751 pieces. For production planning, FCE17E09SC480 (1137 pieces) and FCC17E09SC410 (1124 pieces) offer the highest stock levels. Inventory levels should be confirmed with the component supplier for current availability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message