Request Quote
(Ships tomorrow)
FCC17E09SC240 D-Sub Receptacle Equivalent & Substitute Parts
Part Overview
The FCC17E09SC240 is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder connector features female sockets with a 2-row configuration in shell size 1 (DE, E). The part is classified as obsolete, necessitating identification of active equivalent and substitute components for ongoing design support and procurement.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Connector Style | D-Sub |
| Connector Type | Receptacle, Female Sockets |
| Number of Positions | 9 |
| Number of Rows | 2 |
| Shell Size, Connector Layout | 1 (DE, E) |
| Mounting Type | Through Hole, Right Angle |
| Termination | Solder |
| Shell Material, Finish | Steel, Tin Plated |
| Contact Finish | Gold |
| Contact Finish Thickness | 15.0µin (0.38µm) |
| Current Rating | 5A |
| Voltage Rating | 200V |
| Operating Temperature Range | -40°C ~ 85°C |
| Material Flammability Rating | UL94 V-0 |
| Contact Material | Phosphor Bronze |
| Backset Spacing | 0.590" (14.99mm) |
| Features | Board Lock, Filter |
| Flange Feature | Housing/Shell (Unthreaded) |
| Contact Form | Machined |
| Dielectric Material | Thermoplastic |
| RoHS Status | RoHS non-compliant |
| Product Status | Obsolete |
Substitute Part Grouping Explanation
Substitution of the FCC17E09SC240 is determined by strict alignment of the following critical parameters:
Primary Substitution Criteria:
- Connector style (D-Sub)
- Connector type (Receptacle, Female Sockets)
- Number of positions (9)
- Number of rows (2)
- Shell size and layout (1 / DE, E)
- Mounting type (Through Hole, Right Angle)
- Termination method (Solder)
- Shell material and finish (Steel, Tin Plated)
- Contact finish (Gold)
- Contact finish thickness (15.0µin / 0.38µm)
- Current rating (5A)
- Operating temperature range (-40°C ~ 85°C)
- Material flammability rating (UL94 V-0)
- Contact material (Phosphor Bronze)
- Backset spacing (0.590" / 14.99mm)
- Features (Board Lock, Filter)
- Flange feature (Housing/Shell, Unthreaded)
Secondary Considerations:
- Product status (Active vs. Obsolete)
- RoHS compliance status
- Dielectric material composition
- Contact form (Machined vs. Stamped)
Substitute parts are grouped into two categories: direct Amphenol ICC equivalents with active product status and alternative manufacturer options meeting the same electrical and mechanical specifications.
Parameter Comparison
| Parameter | FCC17E09SC240 | FCE17E09SC240 | FCE17E09SC200 | FCE17E09SC210 | FCE17E09SC250 | FCE17E09SC280 | FCE17E09SC290 | FCE17E09SC2D0 | FCE17E09SC2E0 | 09661136602 | 09661526610 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | HARTING | HARTING |
| Connector Style | D-Sub | D-Sub | D-Sub | D-Sub | D-Sub | D-Sub | D-Sub | D-Sub | D-Sub | D-Sub | D-Sub |
| Connector Type | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets |
| Number of Positions | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 |
| Number of Rows | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Shell Size, Connector Layout | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) |
| Mounting Type | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle |
| Termination | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder |
| Shell Material, Finish | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel | Steel |
| Contact Finish | Gold | Gold | Gold | Gold | Gold | Gold | Gold | Gold | Gold | Not Specified | Not Specified |
| Contact Finish Thickness | 15.0µin (0.38µm) | 15.0µin (0.38µm) | 15.0µin (0.38µm) | 15.0µin (0.38µm) | 15.0µin (0.38µm) | 15.0µin (0.38µm) | 15.0µin (0.38µm) | 15.0µin (0.38µm) | 15.0µin (0.38µm) | Not Specified | Not Specified |
| Current Rating (Amps) | 5A | 5A | 5A | 5A | 5A | 5A | 5A | 5A | 5A | 6.5A | 6.5A |
| Voltage Rating | 200V | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified |
| Operating Temperature Range | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -55°C ~ 125°C | -55°C ~ 125°C |
| Material Flammability Rating | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 |
| Contact Material | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Copper Alloy | Copper Alloy |
| Backset Spacing | 0.590" (14.99mm) | 0.590" (14.99mm) | 0.590" (14.99mm) | 0.590" (14.99mm) | 0.590" (14.99mm) | 0.590" (14.99mm) | 0.590" (14.99mm) | 0.590" (14.99mm) | 0.590" (14.99mm) | 0.409" (10.40mm) | 0.409" (10.40mm) |
| Features | Board Lock, Filter | Board Lock, Filter | Board Lock, Filter | Board Lock, Filter | Board Lock, Filter | Board Lock, Filter | Board Lock, Filter | Board Lock, Filter | Board Lock, Filter | Not Specified | Board Lock |
| Flange Feature | Housing/Shell (Unthreaded) | Housing/Shell (Unthreaded) | Housing/Shell (Unthreaded) | Housing/Shell (Unthreaded) | Housing/Shell (Unthreaded) | Housing/Shell (Unthreaded) | Housing/Shell (Unthreaded) | Housing/Shell (Unthreaded) | Housing/Shell (Unthreaded) | Housing/Shell (4-40) | Housing/Shell (Unthreaded) |
| Contact Form | Machined | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Stamped | Stamped |
| Dielectric Material | Thermoplastic | Thermoplastic, Glass Filled | Thermoplastic, Glass Filled | Thermoplastic, Glass Filled | Thermoplastic, Glass Filled | Thermoplastic, Glass Filled | Thermoplastic, Glass Filled | Thermoplastic, Glass Filled | Thermoplastic, Glass Filled | Polybutylene Terephthalate (PBT), Polyester, Glass Filled | Polybutylene Terephthalate (PBT), Polyester, Glass Filled |
| RoHS Status | RoHS non-compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | ROHS3 Compliant | ROHS3 Compliant |
| Product Status | Obsolete | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active |
Engineering Selection Recommendations
Primary Recommendation: Amphenol ICC FCE17 Series
The FCE17E09SC240, FCE17E09SC200, FCE17E09SC210, FCE17E09SC250, FCE17E09SC280, FCE17E09SC290, FCE17E09SC2D0, and FCE17E09SC2E0 represent the direct active equivalents to the obsolete FCC17E09SC240. All FCE17 variants maintain identical mechanical and electrical specifications with the following advantages:
- Active product status with ongoing manufacturer support
- RoHS Compliant certification (vs. RoHS non-compliant original)
- Enhanced dielectric material composition (Thermoplastic, Glass Filled)
- Identical connector geometry, mounting configuration, and electrical ratings
- Full compatibility with existing PCB layouts and mating connectors
- Consistent gold contact finish and phosphor bronze contact material
The FCE17 series variants differ only in internal configuration parameters not affecting external form factor or electrical performance. Selection among FCE17 variants should be based on specific application requirements and internal connector design specifications.
Secondary Recommendation: HARTING 09661526610
The HARTING 09661526610 provides an alternative from a different manufacturer with the following characteristics:
- Active product status
- ROHS3 Compliant certification
- Identical D-Sub 9-position receptacle configuration
- Through-hole, right-angle solder termination
- Board Lock feature
- Unthreaded housing/shell flange
- Higher current rating (6.5A vs. 5A)
- Extended operating temperature range (-55°C ~ 125°C vs. -40°C ~ 85°C)
Differences include stamped contact form (vs. machined), copper alloy contact material (vs. phosphor bronze), and different backset spacing (0.409" vs. 0.590"). These differences may affect mechanical fit and electrical performance in applications with tight tolerance requirements.
Alternative Consideration: HARTING 09661136602
The HARTING 09661136602 offers similar electrical and mechanical characteristics to the 09661526610 with the following distinction:
- Threaded housing/shell flange (4-40) vs. unthreaded
- Absence of Board Lock feature
- No filter feature specification
This variant is suitable only for applications where threaded flange mounting is required and board lock functionality is not essential.
Frequently Asked Questions (FAQ)
Q: Can the FCE17E09SC240 directly replace the FCC17E09SC240 in existing designs?
A: Yes. The FCE17E09SC240 maintains identical external dimensions, pin configuration, mounting type, and electrical ratings. The primary differences are product status (Active vs. Obsolete), RoHS compliance, and dielectric material enhancement. No PCB layout modifications are required.
Q: What is the significance of the different FCE17 part number suffixes (SC200, SC210, SC250, SC280, SC290, SC2D0, SC2E0)?
A: The suffix variations represent different internal connector configurations that do not affect external form factor, mating interface, or electrical performance. Selection should be based on specific application requirements and internal wiring specifications provided in detailed datasheets.
Q: Are the HARTING alternatives mechanically compatible with the original FCC17E09SC240?
A: The HARTING 09661526610 is mechanically compatible for D-Sub 9-position receptacle applications with identical shell size, position count, and mounting type. However, the different backset spacing (0.409" vs. 0.590") may affect PCB layout compatibility. The HARTING 09661136602 includes a threaded flange (4-40) which is not present on the original part, requiring different mounting hardware.
Q: What are the key differences between machined and stamped contact forms?
A: Machined contacts (FCC17E09SC240, FCE17 series) are individually formed from solid material, providing higher precision and durability. Stamped contacts (HARTING series) are formed from sheet material, offering cost efficiency but potentially different contact resistance and wear characteristics. Selection depends on application requirements for contact reliability and cycle life.
Q: Does the higher current rating of HARTING parts (6.5A vs. 5A) provide additional design margin?
A: The HARTING 09661526610 and 09661136602 are rated for 6.5A continuous current, exceeding the 5A rating of the original FCC17E09SC240. This provides additional design margin for applications approaching the 5A limit. However, other thermal and mechanical factors must be evaluated for the specific application.
Q: What is the impact of the extended operating temperature range in HARTING parts (-55°C ~ 125°C vs. -40°C ~ 85°C)?
A: The HARTING parts support a wider temperature range, enabling use in extreme environment applications. However, if the original design operates within -40°C ~ 85°C, the extended range provides no functional advantage and should not be the primary selection criterion.
Q: Are all substitute parts RoHS compliant?
A: The FCE17 series (all variants) and HARTING parts are RoHS Compliant or ROHS3 Compliant. The original FCC17E09SC240 is RoHS non-compliant. For applications subject to RoHS regulations, the FCE17 series or HARTING alternatives are required.
Q: What packaging options are available for these parts?
A: FCE17E09SC240 is available in Box packaging. FCE17E09SC200, SC210, SC250, SC280, SC290, SC2D0, and SC2E0 have no specified packaging designation. HARTING 09661136602 and 09661526610 are supplied in Bulk packaging. Packaging selection may affect minimum order quantities and delivery schedules.
Q: Can the contact finish specifications be modified for specific applications?
A: The FCE17 series maintains the 15.0µin (0.38µm) gold contact finish thickness of the original part. HARTING parts do not specify contact finish details. Contact finish modifications require direct consultation with manufacturers and are not standard substitution options.
Q: What is the significance of the Board Lock and Filter features?
A: Board Lock provides mechanical retention of the connector to the PCB, preventing accidental disconnection. Filter provides EMI/RFI suppression. The original FCC17E09SC240 includes both features. All FCE17 variants maintain these features. HARTING 09661526610 includes Board Lock but no filter specification. HARTING 09661136602 includes neither feature. Feature requirements should be evaluated for the specific application.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts