FCC17E09SC200 D-Sub Receptacle Equivalent & Substitute Parts

Part Overview

The FCC17E09SC200 is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder-terminated connector features female sockets with a 2-row configuration in shell size 1 (DE, E). The part is classified as obsolete, necessitating identification of active equivalent and substitute components for ongoing design and procurement requirements. Equivalent parts maintain full electrical and mechanical compatibility, while substitute parts satisfy the core functional requirements within specified parameter tolerances.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Receptacle, Female Sockets
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Current Rating (Amps)	5A
Voltage Rating	200V
Backset Spacing	0.590" (14.99mm)
Operating Temperature	-40°C ~ 85°C
Material Flammability Rating	UL94 V-0
Contact Material	Phosphor Bronze
Dielectric Material	Thermoplastic
Flange Feature	Housing/Shell (Unthreaded)
Features	Board Lock, Filter
Color	Black
Moisture Sensitivity Level (MSL)	1 (Unlimited)
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution of the FCC17E09SC200 is determined by strict equivalence across the following critical parameters:

Primary Equivalence Criteria:

Connector style (D-Sub)
Connector type (Receptacle, Female Sockets)
Number of positions (9)
Number of rows (2)
Shell size and layout (1 / DE, E)
Mounting type (Through Hole, Right Angle)
Termination method (Solder)
Backset spacing (0.590" / 14.99mm)
Current rating (5A minimum)
Operating temperature range (-40°C ~ 85°C minimum)
Material flammability rating (UL94 V-0)
Contact material (Phosphor Bronze)
Dielectric material (Thermoplastic or Glass-Filled Thermoplastic)

Secondary Compatibility Parameters:

Shell material and finish (Steel, Tin Plated)
Contact finish (Gold)
Contact finish thickness (15.0µin / 0.38µm)
Flange feature (Housing/Shell, Unthreaded)
Features (Board Lock, Filter)
Color (Black)
Moisture sensitivity level (MSL 1)

Parts are grouped as direct equivalents when all primary and secondary parameters align. Parts are grouped as functional substitutes when primary parameters align but secondary parameters differ within acceptable engineering tolerances for the D-Sub receptacle category.

Parameter Comparison

Part Number	Manufacturer	Series	Product Status	Positions	Rows	Shell Size	Mounting	Termination	Current (A)	Voltage (V)	Backset (mm)	Temp Range (°C)	Shell Material	Contact Finish	Dielectric	RoHS	Inventory
FCC17E09SC200	Amphenol ICC	FCC17	Obsolete	9	2	1 (DE, E)	Through Hole, R/A	Solder	5	200	14.99	-40 ~ 85	Steel, Tin	Gold	Thermoplastic	Non-compliant	1031
FCE17E09SC200	Amphenol ICC	FCE17	Active	9	2	1 (DE, E)	Through Hole, R/A	Solder	5	—	14.99	-40 ~ 85	Steel, Tin	Gold	Thermoplastic, Glass Filled	Compliant	913
FCE17E09SC210	Amphenol ICC	FCE17	Active	9	2	1 (DE, E)	Through Hole, R/A	Solder	5	—	14.99	-40 ~ 85	Steel, Tin	Gold	Thermoplastic, Glass Filled	Compliant	824
FCE17E09SC240	Amphenol ICC	FCE17	Active	9	2	1 (DE, E)	Through Hole, R/A	Solder	5	—	14.99	-40 ~ 85	Steel, Tin	Gold	Thermoplastic, Glass Filled	Compliant	949
FCE17E09SC250	Amphenol ICC	FCE17	Active	9	2	1 (DE, E)	Through Hole, R/A	Solder	5	—	14.99	-40 ~ 85	Steel, Tin	Gold	Thermoplastic, Glass Filled	Compliant	795
FCE17E09SC280	Amphenol ICC	FCE17	Active	9	2	1 (DE, E)	Through Hole, R/A	Solder	5	—	14.99	-40 ~ 85	Steel, Tin	Gold	Thermoplastic, Glass Filled	Compliant	1056
FCE17E09SC290	Amphenol ICC	FCE17	Active	9	2	1 (DE, E)	Through Hole, R/A	Solder	5	—	14.99	-40 ~ 85	Steel, Tin	Gold	Thermoplastic, Glass Filled	Compliant	1094
FCE17E09SC2D0	Amphenol ICC	FCE17	Active	9	2	1 (DE, E)	Through Hole, R/A	Solder	5	—	14.99	-40 ~ 85	Steel, Tin	Gold	Thermoplastic, Glass Filled	Compliant	819
FCE17E09SC2E0	Amphenol ICC	FCE17	Active	9	2	1 (DE, E)	Through Hole, R/A	Solder	5	—	14.99	-40 ~ 85	Steel, Tin	Gold	Thermoplastic, Glass Filled	Compliant	1058
09661136602	HARTING	—	Active	9	2	1 (DE, E)	Through Hole, R/A	Solder	6.5	—	10.40	-55 ~ 125	Steel	—	PBT, Polyester, Glass Filled	ROHS3 Compliant	629
09661526610	HARTING	—	Active	9	2	1 (DE, E)	Through Hole, R/A	Solder	6.5	—	10.40	-55 ~ 125	Steel	—	PBT, Polyester, Glass Filled	ROHS3 Compliant	751

Engineering Selection Recommendations

Direct Equivalents (Amphenol ICC FCE17 Series):

The FCE17E09SC200, FCE17E09SC210, FCE17E09SC240, FCE17E09SC250, FCE17E09SC280, FCE17E09SC290, FCE17E09SC2D0, and FCE17E09SC2E0 are direct functional equivalents to the FCC17E09SC200. All parts maintain identical electrical and mechanical specifications across connector configuration, pin count, mounting style, current rating, operating temperature range, and backset spacing. The primary distinction is product status: all FCE17 variants are active production parts, whereas the FCC17E09SC200 is obsolete.

All FCE17 variants feature RoHS-compliant construction with glass-filled thermoplastic dielectric material, compared to the non-compliant thermoplastic dielectric of the original part. This material enhancement provides improved mechanical and thermal stability without altering electrical performance or physical compatibility.

Functional Substitutes (HARTING Series):

The HARTING parts 09661136602 and 09661526610 function as substitutes for applications where the core D-Sub receptacle configuration is required. These parts maintain the 9-position, 2-row, shell size 1 (DE, E) configuration with through-hole, right-angle solder termination. However, the following parameter differences exist:

Backset spacing: 0.409" (10.40mm) versus 0.590" (14.99mm) on the original part
Current rating: 6.5A versus 5A
Operating temperature range: -55°C ~ 125°C versus -40°C ~ 85°C
Contact finish: Not specified versus gold-plated
Dielectric material: PBT, Polyester, Glass Filled versus Thermoplastic
Flange feature: 4-40 threaded or unthreaded versus unthreaded
Contact form: Stamped versus machined

The HARTING parts are ROHS3 compliant and provide enhanced thermal performance. Selection of HARTING substitutes requires confirmation that the reduced backset spacing and alternative contact geometry are compatible with the target PCB layout and mating connector specifications.

Frequently Asked Questions (FAQ)

Q: Can FCE17E09SC200 directly replace FCC17E09SC200 in existing designs?

A: Yes. The FCE17E09SC200 maintains full electrical and mechanical compatibility with the FCC17E09SC200. Both parts share identical connector configuration, pin count, mounting type, current rating, voltage rating, operating temperature range, and backset spacing. The FCE17 variant is an active production equivalent suitable for direct substitution.

Q: What is the difference between the multiple FCE17 part numbers (SC200, SC210, SC240, SC250, SC280, SC290, SC2D0, SC2E0)?

A: All FCE17E09SC2xx variants are functionally identical in electrical and mechanical specifications. The suffix designations (200, 210, 240, 250, 280, 290, 2D0, 2E0) represent internal Amphenol ICC manufacturing or packaging variants. Selection among these parts should be based on inventory availability and packaging requirements. All variants are active production parts with RoHS compliance.

Q: Are HARTING parts 09661136602 and 09661526610 suitable replacements?

A: HARTING parts function as substitutes for applications where the 9-position D-Sub receptacle configuration is the primary requirement. However, the backset spacing differs (10.40mm versus 14.99mm), which may affect PCB layout compatibility. Confirmation of PCB hole pattern and mating connector specifications is required before selection. HARTING parts offer enhanced current rating (6.5A) and extended operating temperature range (-55°C ~ 125°C).

Q: What is the significance of the RoHS compliance difference?

A: The FCC17E09SC200 is RoHS non-compliant, while all FCE17 variants and HARTING parts are RoHS compliant. For applications subject to RoHS regulations or customer requirements, the compliant FCE17 series is the appropriate selection. The compliance difference reflects material composition changes, specifically the use of glass-filled thermoplastic dielectric in compliant variants.

Q: Does the glass-filled thermoplastic dielectric in FCE17 parts affect electrical performance?

A: No. The glass-filled thermoplastic dielectric in FCE17 variants provides equivalent electrical performance to the thermoplastic dielectric in the original FCC17E09SC200. The material enhancement improves mechanical strength and thermal stability without altering capacitance, insulation resistance, or dielectric breakdown characteristics relevant to the 5A, 200V operating specification.

Q: What packaging options are available?

A: The FCC17E09SC200 and most FCE17 variants are supplied without specified packaging. FCE17E09SC240 is supplied in box packaging. HARTING parts 09661136602 and 09661526610 are supplied in bulk packaging. Packaging selection should be coordinated with procurement and inventory management requirements.

Q: Can the FCC17E09SC200 be used in new designs?

A: The FCC17E09SC200 is classified as obsolete. New designs should specify an active equivalent from the FCE17 series (FCE17E09SC200 or related variants) to ensure long-term supply availability and manufacturing support. Obsolete parts carry risk of supply discontinuation and should not be selected for new product development.

Q: What is the contact material composition?

A: The FCC17E09SC200 and all FCE17 variants use phosphor bronze contacts. HARTING parts use copper alloy contacts. Both materials provide equivalent electrical conductivity and mechanical durability for the 5A to 6.5A current rating. Contact material selection does not affect interchangeability for standard signal applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message