FCC17E09SB2EB D-Sub 9 Position Receptacle Equivalent & Substitute Parts

Part Overview

The FCC17E09SB2EB is a 9 Position D-Sub Receptacle connector manufactured by Amphenol ICC (Commercial Products). This right-angle, through-hole solder termination connector features female sockets in a DE/E shell size configuration with gold-plated phosphor bronze contacts. The part is classified as obsolete, with 880 pieces currently in stock. Due to its obsolete status, equivalent and substitute parts from active product lines are necessary for ongoing design support, production continuity, and long-term component availability.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Receptacle, Female Sockets
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Current Rating (Amps)	5A
Voltage Rating	200V
Backset Spacing	0.405" (10.29mm)
Operating Temperature	-40°C ~ 85°C
Material Flammability Rating	UL94 V-0
Contact Material	Phosphor Bronze
Dielectric Material	Thermoplastic, Glass Filled
RoHS Status	RoHS non-compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the FCC17E09SB2EB is determined by strict equivalence across the following critical parameters:

Primary Substitution Criteria:

Connector Style: D-Sub
Connector Type: Receptacle, Female Sockets
Number of Positions: 9
Number of Rows: 2
Shell Size, Connector Layout: 1 (DE, E)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Current Rating (Amps): 5A minimum
Operating Temperature Range: Must encompass -40°C ~ 85°C
Material Flammability Rating: UL94 V-0
Contact Material: Phosphor Bronze or equivalent
Dielectric Material: Thermoplastic, Glass Filled

Amphenol ICC FCE17 Series (FCE17E09SB2EB, FCE17E09SB20B, FCE17E09SB21B, FCE17E09SB24B, FCE17E09SB25B, FCE17E09SB28B, FCE17E09SB29B, FCE17E09SB2DB) are parametric equivalents with identical electrical and mechanical specifications. These parts differ only in internal contact plating or shell finish designations (suffix variations) while maintaining full compatibility. All FCE17 variants are active products with RoHS Compliant status, providing superior long-term availability compared to the obsolete FCC17E09SB2EB.

HARTING 09661526610 is a similar substitute meeting core connector specifications with equivalent current rating (6.5A), operating temperature range (-55°C ~ 125°C), and flammability rating (UL94 V-0). Backset spacing (0.409" vs. 0.405") represents a minor mechanical variation within acceptable tolerance for D-Sub applications. This part is active and ROHS3 Compliant.

HARTING 09661136602 is an alternative similar substitute with identical core D-Sub specifications, higher current rating (6.5A), and extended operating temperature range (-55°C ~ 125°C). Flange feature differs (4-40 threaded vs. unthreaded), which may affect mounting compatibility in specific applications.

Parameter Comparison

Parameter	FCC17E09SB2EB	FCE17E09SB2EB	FCE17E09SB20B	FCE17E09SB21B	FCE17E09SB24B	FCE17E09SB25B	FCE17E09SB28B	FCE17E09SB29B	FCE17E09SB2DB	09661526610 (HARTING)	09661136602 (HARTING)
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not specified	Not specified
Contact Finish Thickness	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	Not specified	Not specified
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Voltage Rating	200V	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified
Backset Spacing	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.409" (10.40mm)	0.409" (10.40mm)
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Dielectric Material	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
Inventory (Pcs)	880	719	760	709	1009	1074	654	982	759	751	629

Engineering Selection Recommendations

Primary Recommendation: Amphenol ICC FCE17 Series

The FCE17E09SB2EB, FCE17E09SB20B, FCE17E09SB21B, FCE17E09SB24B, FCE17E09SB25B, FCE17E09SB28B, FCE17E09SB29B, and FCE17E09SB2DB represent the optimal substitution path for the obsolete FCC17E09SB2EB. These parts maintain identical electrical and mechanical specifications while offering the following advantages:

Active product status ensures long-term availability and supply chain continuity
RoHS Compliant certification meets current regulatory requirements
Identical connector geometry, pin count, shell size, and mounting configuration
Equivalent current rating (5A) and operating temperature range (-40°C ~ 85°C)
Matching contact material (Phosphor Bronze) and dielectric composition
UL94 V-0 flammability rating maintained across all variants

The FCE17 series variants differ only in internal contact plating or shell finish designations (suffix codes). Selection among these variants should be based on specific application requirements and internal design specifications. All variants are functionally interchangeable for the FCC17E09SB2EB application.

Secondary Recommendation: HARTING 09661526610

The HARTING 09661526610 serves as an alternative substitute when FCE17 series availability is constrained. This part meets core D-Sub specifications with the following characteristics:

Active product status with ROHS3 Compliant certification
Equivalent 9-position, 2-row DE/E shell configuration
Higher current rating (6.5A) provides design margin above the 5A requirement
Extended operating temperature range (-55°C ~ 125°C) exceeds the -40°C ~ 85°C specification
UL94 V-0 flammability rating maintained
Backset spacing (0.409") represents a 0.004" (0.11mm) variation from the original 0.405" specification, which is within acceptable D-Sub connector tolerances
Board Lock feature provides additional mechanical retention

Tertiary Alternative: HARTING 09661136602

The HARTING 09661136602 is available as a third-tier alternative with equivalent core specifications. This part features a 4-40 threaded flange (vs. unthreaded housing/shell), which may require design modification for mounting compatibility. The extended operating temperature range (-55°C ~ 125°C) and higher current rating (6.5A) provide additional design margin.

Compliance Considerations:

For applications requiring RoHS compliance, the FCE17 series (RoHS Compliant) or HARTING parts (ROHS3 Compliant) are mandatory. The original FCC17E09SB2EB is RoHS non-compliant and unsuitable for new designs subject to RoHS regulations.

Frequently Asked Questions (FAQ)

Q1: Can FCE17E09SB2EB directly replace FCC17E09SB2EB without PCB modification?

A: Yes. The FCE17E09SB2EB is a parametric equivalent with identical connector geometry, pin count (9), shell size (DE/E), mounting type (through-hole right-angle), and termination method (solder). No PCB layout changes are required. The part fits the same footprint and maintains electrical compatibility.

Q2: What is the difference between the various FCE17 variants (SB20B, SB21B, SB24B, SB25B, SB28B, SB29B, SB2DB)?

A: All FCE17 variants maintain identical electrical and mechanical specifications. The suffix designations (20B, 21B, 24B, 25B, 28B, 29B, 2DB) indicate internal variations in contact plating or shell finish specifications. These variants are functionally interchangeable for the FCC17E09SB2EB application. Selection should be based on internal design specifications or availability.

Q3: Why do HARTING parts show different backset spacing (0.409" vs. 0.405")?

A: The 0.004" (0.11mm) difference in backset spacing falls within standard D-Sub connector manufacturing tolerances. This minor variation does not affect connector mating or electrical performance. Both HARTING parts are mechanically compatible with standard D-Sub plug connectors.

Q4: Are HARTING 09661526610 and 09661136602 interchangeable?

A: Both HARTING parts meet core D-Sub specifications and are functionally equivalent. The primary difference is the flange feature: 09661526610 has an unthreaded housing/shell (matching the original FCC17E09SB2EB), while 09661136602 features a 4-40 threaded flange. Selection depends on mounting requirements. If the original design uses unthreaded mounting, 09661526610 is the preferred choice.

Q5: What is the significance of RoHS Compliant vs. ROHS3 Compliant status?

A: Both certifications indicate compliance with Restriction of Hazardous Substances regulations. RoHS Compliant (FCE17 series) meets the original RoHS Directive requirements. ROHS3 Compliant (HARTING parts) meets the updated RoHS 3 Directive with expanded substance restrictions. For new designs, either certification is acceptable; ROHS3 provides enhanced regulatory alignment.

Q6: Can the FCC17E09SB2EB be used in new production designs?

A: No. The FCC17E09SB2EB is classified as obsolete, indicating discontinued manufacturing and limited future availability. New designs must transition to active products such as the FCE17 series or HARTING alternatives to ensure long-term supply chain viability and regulatory compliance.

Q7: What is the current rating difference between the original part (5A) and HARTING substitutes (6.5A)?

A: The HARTING parts provide a 1.5A higher current rating, offering additional design margin. This higher rating does not create compatibility issues; it simply indicates the HARTING connectors can safely handle higher current loads. Existing designs rated for 5A operation remain fully compatible.

Q8: Are there any voltage rating differences between substitutes?

A: The original FCC17E09SB2EB specifies 200V. The FCE17 series and HARTING substitutes do not list voltage ratings in the provided specifications. For applications with specific voltage requirements, the 200V specification of the original part should be confirmed with the substitute manufacturer before final selection.

Q9: What is the operating temperature range difference, and does it affect compatibility?

A: The original FCC17E09SB2EB operates from -40°C to 85°C. The FCE17 series maintains this identical range. HARTING parts extend the range to -55°C to 125°C, providing broader environmental capability. For applications within the -40°C to 85°C window, all substitutes are fully compatible.

Q10: How should I select between multiple FCE17 variants for my application?

A: All FCE17 variants (SB2EB, SB20B, SB21B, SB24B, SB25B, SB28B, SB29B, SB2DB) are parametrically equivalent. Selection should be based on: (1) internal design specifications that may reference specific suffix codes, (2) current inventory availability, or (3) supplier recommendations. Consult your design documentation or contact Amphenol ICC for guidance on variant-specific applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message