FCC17E09SB2D0 Equivalent & Substitute Parts

Part Overview

The FCC17E09SB2D0 is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This right-angle, through-hole solder termination connector features female sockets with gold-plated phosphor bronze contacts and a tin-plated steel shell. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for new designs and production continuity.

Key Parameters

Parameter	Value
Connector Type	Receptacle, Female Sockets
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Material	Phosphor Bronze
Flange Feature	Housing/Shell (Unthreaded)
Features	Board Lock, Filter
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

Electrical Compatibility: Connector type (receptacle, female sockets), number of positions (9), number of rows (2), shell size (DE/E), current rating (5A), voltage rating (200V), and contact material (phosphor bronze).

Mechanical Compatibility: Mounting type (through hole, right angle), termination method (solder), shell material (steel, tin plated), contact finish (gold), flange feature (unthreaded housing/shell), and backset spacing (0.405" / 10.29mm).

Environmental & Regulatory: Operating temperature range (-40°C ~ 85°C), material flammability rating (UL94 V-0), and moisture sensitivity level (MSL 1).

Substitute parts are grouped into two categories:

Category 1 – Amphenol ICC Active Equivalents (FCE17 Series): Parts FCE17E09SB200, FCE17E09SB210, FCE17E09SB240, FCE17E09SB250, FCE17E09SB280, FCE17E09SB290, FCE17E09SB2E0, and FCE17E09SB2D0 maintain all critical electrical and mechanical parameters. These parts differ only in internal design variants (indicated by the final two characters) and are RoHS compliant, addressing regulatory requirements while preserving form, fit, and function.

Category 2 – Cross-Manufacturer Alternative (HARTING 09661526610): This part maintains core electrical specifications (9-position, receptacle, female sockets, 6.5A current rating, right-angle through-hole solder termination) and mechanical form factor. Differences include higher current rating (6.5A vs. 5A), extended operating temperature range (-55°C ~ 125°C), stamped contact form versus machined, and copper alloy contacts. This part is ROHS3 compliant.

Parameter Comparison

Parameter	FCC17E09SB2D0 (Main)	FCE17E09SB2D0	FCE17E09SB200	FCE17E09SB210	FCE17E09SB240	FCE17E09SB250	FCE17E09SB280	FCE17E09SB290	FCE17E09SB2E0	09661526610 (HARTING)
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	9	9	9	9	9	9	9	9	9	9
Number of Rows	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A
Voltage Rating	200V	—	—	—	—	—	—	—	—	—
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	—
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy
Flange Feature	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)
Features	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

Primary Recommendation – Amphenol ICC FCE17 Series: The FCE17E09SB2D0, FCE17E09SB200, FCE17E09SB210, FCE17E09SB240, FCE17E09SB250, FCE17E09SB280, FCE17E09SB290, and FCE17E09SB2E0 are direct functional equivalents manufactured by the same supplier. All maintain identical electrical and mechanical specifications while transitioning from RoHS non-compliant to RoHS compliant status. These parts are currently in active production with confirmed inventory availability (800–1173 units). Selection among FCE17 variants depends on internal design requirements indicated by the final two characters; all variants satisfy the core substitution criteria.

Secondary Recommendation – HARTING 09661526610: This part provides an alternative from an established connector manufacturer. It maintains the 9-position D-Sub receptacle form factor, right-angle through-hole solder termination, and board lock feature. The higher current rating (6.5A) and extended operating temperature range (-55°C ~ 125°C) offer enhanced performance margins for demanding applications. The part is ROHS3 compliant with 751 units in stock. Contact material differs (copper alloy versus phosphor bronze) and contact finish is not specified; these differences do not preclude electrical compatibility but should be evaluated against specific application requirements.

Regulatory Compliance: The obsolete FCC17E09SB2D0 is RoHS non-compliant. All recommended substitutes are RoHS compliant or ROHS3 compliant, addressing regulatory requirements for new designs and production continuity.

Frequently Asked Questions (FAQ)

Q: Can FCE17E09SB2D0 directly replace FCC17E09SB2D0 in existing designs?

A: Yes. Both parts are 9-position D-Sub receptacles with identical electrical ratings (5A, 200V), mechanical form factor (right-angle through-hole solder termination), shell size (DE/E), and operating temperature range (-40°C ~ 85°C). The primary difference is RoHS compliance status; FCE17E09SB2D0 is RoHS compliant while FCC17E09SB2D0 is not. Form, fit, and function are equivalent.

Q: What distinguishes the different FCE17E09SB variants (SB200, SB210, SB240, SB250, SB280, SB290, SB2E0)?

A: All FCE17E09SB variants share identical electrical and mechanical specifications. Differences are encoded in the final two characters and represent internal design variations. Selection among variants should be based on specific application requirements or design documentation; all are functionally equivalent for standard D-Sub receptacle applications.

Q: Is HARTING 09661526610 a suitable replacement for FCC17E09SB2D0?

A: HARTING 09661526610 maintains core compatibility as a 9-position D-Sub receptacle with right-angle through-hole solder termination and board lock feature. It exceeds the original specification in current rating (6.5A versus 5A) and operating temperature range (-55°C ~ 125°C versus -40°C ~ 85°C). Contact material differs (copper alloy versus phosphor bronze) and contact finish is not specified. This part is suitable for applications where the original specifications are met or exceeded; however, contact material differences should be evaluated against specific signal integrity or environmental requirements.

Q: What is the significance of the backset spacing parameter?

A: Backset spacing (0.405" / 10.29mm for the main part and 0.409" / 10.40mm for HARTING 09661526610) defines the distance from the connector mounting surface to the contact plane. The slight difference (0.004" / 0.11mm) between Amphenol and HARTING parts is within typical manufacturing tolerance but should be verified against PCB layout and mating connector specifications to ensure proper engagement and contact alignment.

Q: Are all substitute parts available in the same packaging?

A: Amphenol ICC FCE17 series parts are supplied in standard packaging (not specified in detail). HARTING 09661526610 is supplied in bulk packaging. Packaging differences do not affect electrical or mechanical compatibility; however, procurement and handling procedures may differ. Confirm packaging requirements with your supply chain.

Q: What is the moisture sensitivity level (MSL) for these connectors?

A: All listed parts have MSL 1 (Unlimited), indicating no moisture sensitivity. These connectors do not require special storage or handling conditions related to moisture exposure and can be stored and handled under standard industrial conditions.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message