FCC17E09SA6EB D-Sub 9-Position Right Angle Receptacle Connector

Part Overview

The FCC17E09SA6EB is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This connector features a right-angle through-hole solder termination with female sockets, designed for signal applications in industrial and commercial equipment. The part is classified as obsolete, necessitating identification of active equivalent and substitute components that maintain electrical and mechanical compatibility with existing designs.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Receptacle, Female Sockets
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Shell Material, Finish	Steel, Tin Plated
Contact Type	Signal
Current Rating	5A
Voltage Rating	200V
Operating Temperature Range	-40°C ~ 85°C
Material Flammability Rating	UL94 V-0
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution of the FCC17E09SA6EB is determined by strict adherence to the following electrical and mechanical parameters:

Critical Matching Parameters:

Connector style: D-Sub
Connector type: Receptacle, Female Sockets
Number of positions: 9
Number of rows: 2
Shell size and layout: 1 (DE, E)
Mounting type: Through Hole, Right Angle
Termination method: Solder
Contact type: Signal
Material flammability rating: UL94 V-0
Moisture sensitivity level: 1 (Unlimited)

Acceptable Variation Parameters:

Current rating: Substitute parts rated at 6.5A exceed the 5A requirement and are acceptable
Backset spacing: Substitute parts with 0.409" (10.40mm) spacing differ from the original 0.318" (8.08mm) but maintain mechanical compatibility within the D-Sub form factor
Flange feature type: Board side, housing/shell with various mounting configurations (M3, 4-40, unthreaded) are acceptable based on application requirements
Contact form: Both machined and stamped contact forms are acceptable
Dielectric material: Thermoplastic glass-filled and polyester/PBT variants are acceptable
Contact material: Phosphor bronze and copper alloy are acceptable
Operating temperature: Substitute parts with extended ranges (-55°C ~ 125°C) exceed the original specification and are acceptable
RoHS compliance: Active substitute parts with RoHS3 compliance are acceptable for new designs

Substitute parts from HARTING and Amphenol ICC (FCE17 series) meet these criteria and are listed as active products with current inventory availability.

Parameter Comparison

Parameter	FCC17E09SA6EB (Main)	FCE17E09SA6EB	09661136602	09661526610	09661526611	09661526615	09661527611	09661527612	09661527615	09661527616	09661566611
Manufacturer	Amphenol ICC	Amphenol ICC	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel
Contact Type	Signal	Signal	Signal	Signal	Signal	Signal	Signal	Signal	Signal	Signal	Signal
Current Rating (Amps)	5A	5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Operating Temperature Range	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
RoHS Status	RoHS non-compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Primary Substitute: FCE17E09SA6EB (Amphenol ICC)

The FCE17E09SA6EB is the direct active equivalent from Amphenol ICC. This part maintains identical electrical specifications (5A current rating, 200V voltage rating) and mechanical configuration to the obsolete FCC17E09SA6EB. The FCE17 series represents the active product line replacement for the FCC17 series. This connector is RoHS compliant and carries active product status with 704 units in current inventory.

Secondary Substitutes: HARTING 09661 Series

The HARTING 09661 series connectors (09661136602, 09661526610, 09661526611, 09661526615, 09661527611, 09661527612, 09661527615, 09661527616, 09661566611) are functionally equivalent alternatives. These parts maintain the critical D-Sub 9-position receptacle configuration with through-hole right-angle solder termination. Key differences include:

Current rating increased to 6.5A, exceeding the original 5A specification
Operating temperature range extended to -55°C ~ 125°C, exceeding the original -40°C ~ 85°C range
ROHS3 compliance status for new design implementations
Backset spacing of 0.409" (10.40mm) versus the original 0.318" (8.08mm)
Flange feature variations (M3, 4-40, unthreaded) accommodate different mounting requirements
Contact form variations (stamped versus machined) and dielectric material options (PBT, PCT)

Selection among HARTING variants depends on specific flange mounting requirements and packaging preferences (bulk or tray).

Compliance Considerations

For new designs requiring RoHS compliance, FCE17E09SA6EB or any HARTING 09661 series part is appropriate. For legacy system repairs or replacements where RoHS non-compliance is acceptable, the FCC17E09SA6EB remains available with 982 units in inventory.

Frequently Asked Questions (FAQ)

Q: Can the FCE17E09SA6EB directly replace the FCC17E09SA6EB in existing designs?

A: Yes. The FCE17E09SA6EB maintains identical electrical and mechanical specifications including 9-position configuration, 5A current rating, 200V voltage rating, through-hole right-angle solder termination, and UL94 V-0 flammability rating. The primary difference is RoHS compliance status and active product availability.

Q: What is the difference between the Amphenol ICC FCE17E09SA6EB and the HARTING 09661 series substitutes?

A: The FCE17E09SA6EB is the direct Amphenol ICC equivalent with identical current rating (5A) and voltage rating (200V). HARTING 09661 series parts provide higher current capacity (6.5A), extended operating temperature range (-55°C ~ 125°C), and ROHS3 compliance. Backset spacing differs at 0.409" (10.40mm) versus 0.318" (8.08mm) on the original part. Flange mounting configurations vary among HARTING variants.

Q: Are there packaging differences among the substitute parts?

A: Yes. The FCE17E09SA6EB is available in standard packaging. HARTING parts are supplied in either bulk or tray packaging. Specific packaging requirements should be confirmed with procurement specifications.

Q: Which HARTING 09661 variant should be selected?

A: Selection depends on flange mounting requirements. Parts with M3 flange feature (09661526611, 09661526615, 09661527611, 09661527615, 09661566611) accommodate M3 mounting. Parts with 4-40 flange feature (09661136602, 09661527612, 09661527616) accommodate 4-40 mounting. Part 09661526610 features unthreaded housing/shell flange. Board lock features are present on most HARTING variants except 09661526610.

Q: Is the increased current rating (6.5A) of HARTING parts a concern for 5A applications?

A: No. Higher current rating indicates increased capacity and does not create compatibility issues for applications rated at 5A. The connector can safely handle the lower current requirement.

Q: What is the significance of the extended operating temperature range on HARTING parts?

A: HARTING 09661 series parts operate from -55°C ~ 125°C, exceeding the original -40°C ~ 85°C specification. This extended range provides additional design margin for applications subject to extreme temperature conditions and is fully backward compatible with the original temperature specification.

Q: Are all substitute parts UL94 V-0 rated?

A: Yes. All listed substitute parts maintain UL94 V-0 material flammability rating, matching the original FCC17E09SA6EB specification.

Q: What is the moisture sensitivity level for all parts?

A: All parts, including the main part and all substitutes, carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage or handling.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message