FCC17E09SA69B D-Sub 9-Position Receptacle Equivalent & Substitute Parts

Part Overview

The FCC17E09SA69B is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder-terminated connector features female sockets with a DE/E shell size (1) and board-side M3 flange. The part is classified as obsolete, necessitating identification of active equivalent and substitute components that maintain electrical and mechanical compatibility for new designs and legacy system replacements.

Key Parameters

Parameter	FCC17E09SA69B Value
Connector Style	D-Sub
Connector Type	Receptacle, Female Sockets
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Material Flammability Rating	UL94 V-0
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the FCC17E09SA69B is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Connector Style: D-Sub
Connector Type: Receptacle, Female Sockets
Number of Positions: 9
Number of Rows: 2
Shell Size, Connector Layout: 1 (DE, E)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Material Flammability Rating: UL94 V-0
Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variations:

Current Rating: Substitute parts rated at 6.5A exceed the 5A requirement and are acceptable for applications within the original 5A specification
Backset Spacing: Amphenol ICC parts maintain 0.318" (8.08mm); HARTING parts specify 0.409" (10.40mm), representing a mechanical variation that affects board layout compatibility
Contact Finish: Amphenol ICC specifies gold plating; HARTING parts do not specify contact finish, representing a material variation
Flange Feature: Variations include board-side M3, housing/shell M3, housing/shell 4-40, and housing/shell unthreaded configurations
Dielectric Material: Amphenol ICC uses thermoplastic glass-filled; HARTING uses polybutylene terephthalate (PBT) or polycyclohexylenedimethylene terephthalate (PCT) glass-filled
Contact Form: Amphenol ICC specifies machined; HARTING specifies stamped
RoHS Status: Amphenol ICC FCE17E09SA69B is RoHS compliant; HARTING parts are ROHS3 compliant; original FCC17E09SA69B is non-compliant

Substitute parts are grouped by manufacturer and product status (active vs. obsolete). All listed substitutes maintain the core D-Sub 9-position receptacle architecture and solder termination required for direct functional replacement.

Parameter Comparison

Parameter	FCC17E09SA69B	FCE17E09SA69B	09661136602	09661526610	09661526611	09661526615	09661527611	09661527612	09661527615	09661527616	09661566611
Manufacturer	Amphenol ICC	Amphenol ICC	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A
Voltage Rating	200V	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
RoHS Status	RoHS Non-Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Backset Spacing	0.318" (8.08mm)	0.318" (8.08mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)
Contact Form	Machined	Not Specified	Stamped	Stamped	Stamped	Stamped	Stamped	Stamped	Stamped	Stamped	Stamped
Dielectric Material	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT), Glass Filled

Engineering Selection Recommendations

Primary Substitute: FCE17E09SA69B (Amphenol ICC)

The FCE17E09SA69B is the direct active equivalent from the same manufacturer. It maintains identical electrical specifications (5A current rating, 200V voltage rating), mechanical configuration (9-position DE/E shell, through-hole right-angle solder termination), and operating temperature range (-40°C ~ 85°C). The FCE17E09SA69B achieves RoHS compliance, addressing regulatory requirements for new designs while preserving full compatibility with existing mating connectors and PCB layouts. Backset spacing remains at 0.318" (8.08mm), ensuring no board redesign is required.

Secondary Substitutes: HARTING 09661526610, 09661526611, 09661526615, 09661527611, 09661527612, 09661527615, 09661527616, 09661566611

HARTING D-Sub 9-position receptacles provide functional equivalence with the following considerations:

All HARTING substitutes are active products with ROHS3 compliance
Current rating of 6.5A exceeds the original 5A specification, providing design margin
Operating temperature range extends to -55°C ~ 125°C, exceeding the original -40°C ~ 85°C specification
Backset spacing increases to 0.409" (10.40mm), requiring PCB layout verification and potential redesign
Flange configurations vary (M3, 4-40, unthreaded) and must match mounting requirements
Dielectric materials differ (PBT/polyester or PCT) from the original thermoplastic composition
Contact form changes from machined to stamped, affecting contact resistance characteristics
Contact finish specifications are not provided for HARTING parts

HARTING substitutes are suitable for applications where the increased backset spacing can be accommodated and where the extended operating temperature range provides system benefit. Board-level integration verification is required due to mechanical spacing differences.

HARTING 09661136602 Consideration

The 09661136602 features unthreaded housing/shell flange, distinguishing it from M3 or 4-40 threaded variants. This configuration is applicable only to applications where flange mounting is not required or where alternative mechanical fastening is employed.

Frequently Asked Questions (FAQ)

Q: Can FCE17E09SA69B directly replace FCC17E09SA69B without PCB modification?

A: Yes. The FCE17E09SA69B maintains identical backset spacing (0.318" / 8.08mm), shell size (DE/E, 1), mounting type (through-hole right-angle), and solder termination. No PCB layout changes are required. The primary difference is RoHS compliance status and product status transition from obsolete to active.

Q: What is the impact of HARTING backset spacing (0.409" vs. 0.318")?

A: Backset spacing defines the distance from the connector mounting face to the rear of the connector body. The HARTING increase of 0.091" (2.32mm) affects PCB layout clearance and mating connector positioning. Applications with space constraints or existing mechanical fixtures may require redesign. Electrical functionality remains unaffected.

Q: Are HARTING stamped contacts equivalent to Amphenol ICC machined contacts?

A: Both contact forms provide electrical continuity and meet UL94 V-0 flammability requirements. Stamped contacts typically exhibit slightly higher contact resistance variability compared to machined contacts. For applications with stringent contact resistance specifications, machined contact designs (Amphenol ICC) are preferred. For general signal applications, stamped contacts are functionally acceptable.

Q: Why do HARTING parts not specify voltage rating?

A: Voltage rating is not provided in the HARTING technical data. The original FCC17E09SA69B specifies 200V. When substituting with HARTING parts, applications requiring voltage rating verification should contact the manufacturer directly or consult detailed datasheets. The UL94 V-0 flammability rating and operating temperature range (-55°C ~ 125°C) indicate industrial-grade construction suitable for standard signal applications.

Q: Can I use a HARTING part with 6.5A rating in a 5A application?

A: Yes. The 6.5A rating exceeds the original 5A requirement. Substituting a higher-rated component in a lower-current application does not degrade performance. The connector will operate within its design envelope with additional current capacity margin.

Q: What is the difference between RoHS and ROHS3 compliance?

A: RoHS (Restriction of Hazardous Substances) compliance restricts lead, cadmium, mercury, and other hazardous materials. ROHS3 represents the third iteration of RoHS regulations with expanded scope. The original FCC17E09SA69B is RoHS non-compliant. The FCE17E09SA69B is RoHS compliant. HARTING parts are ROHS3 compliant. For new designs subject to RoHS regulations, FCE17E09SA69B or HARTING substitutes are required.

Q: Does contact finish (gold vs. unspecified) affect signal integrity?

A: The original FCC17E09SA69B specifies gold contact finish at 15.0µin (0.38µm) thickness. HARTING parts do not specify contact finish. Gold plating provides corrosion resistance and stable contact resistance over time. For applications in corrosive environments or with stringent contact resistance stability requirements, gold-plated contacts (Amphenol ICC) are preferred. For standard indoor signal applications, unspecified HARTING contact finishes are functionally acceptable.

Q: Which HARTING part should I select if multiple options are available?

A: Selection depends on flange configuration requirements. Identify the mounting method: M3 threaded (09661526611, 09661526615, 09661527611, 09661527615, 09661566611), 4-40 threaded (09661136602, 09661527612, 09661527616), or unthreaded (09661526610). Match the flange type to existing mounting hardware. All variants maintain identical electrical specifications and 9-position DE/E shell configuration.

Q: Is packaging type (bulk vs. tray) a functional consideration?

A: Packaging type affects logistics and handling but does not impact electrical or mechanical function. Bulk packaging (loose components) and tray packaging (organized arrays) are equivalent for component selection purposes. Packaging choice depends on assembly process requirements and inventory management preferences.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message