FCC17E09SA690 D-Sub Receptacle Equivalent & Substitute Parts

Part Overview

The FCC17E09SA690 is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder-terminated connector features female sockets with gold-plated phosphor bronze contacts and a tin-plated steel shell. The connector is classified as obsolete, necessitating identification of active equivalent and substitute parts for ongoing design and procurement requirements. Active alternatives maintain functional compatibility while offering improved product status and compliance certifications.

Key Parameters

Parameter	FCC17E09SA690
Connector Type	Receptacle, Female Sockets
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Current Rating	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Contact Material	Phosphor Bronze
Flange Feature	Housing/Shell (M3)
Backset Spacing	0.318" (8.08mm)
Features	Board Lock, Filter
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS non-compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the FCC17E09SA690 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Connector Type: Receptacle, Female Sockets
Number of Positions: 9
Number of Rows: 2
Shell Size, Connector Layout: 1 (DE, E)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Current Rating: 5A
Operating Temperature: -40°C ~ 85°C
Material Flammability Rating: UL94 V-0
Backset Spacing: 0.318" (8.08mm)
Features: Board Lock, Filter

Allowable Variations:

Shell Material Finish: Steel with or without tin plating
Contact Finish: Gold plating maintained
Dielectric Material: Thermoplastic or Thermoplastic with Glass Filled composition
Flange Feature: M3 or alternative mounting configurations
Contact Form: Machined or Stamped
RoHS Compliance: Compliant or non-compliant variants acceptable
Voltage Rating: Specification may vary or be unspecified in substitute parts

Substitute parts are grouped into two categories: Amphenol ICC FCE17 series variants (parametric equivalents with active product status) and cross-manufacturer alternatives (HARTING series) that maintain functional compatibility within specified electrical and mechanical tolerances.

Parameter Comparison

Parameter	FCC17E09SA690	FCE17E09SA690	FCE17E09SA600	FCE17E09SA610	FCE17E09SA640	FCE17E09SA650	FCE17E09SA680	FCE17E09SA6D0	FCE17E09SA6E0	09661136602	09661526610
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not Specified	Not Specified
Contact Finish Thickness	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	Not Specified	Not Specified
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Backset Spacing	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.409" (10.40mm)	0.409" (10.40mm)
Features	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Not Specified	Board Lock
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Flange Feature	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (4-40)	Housing/Shell (Unthreaded)
Dielectric Material	Thermoplastic	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

Primary Substitutes (Amphenol ICC FCE17 Series):

The FCE17E09SA690, FCE17E09SA600, FCE17E09SA610, FCE17E09SA640, FCE17E09SA650, FCE17E09SA680, FCE17E09SA6D0, and FCE17E09SA6E0 are direct parametric equivalents manufactured by Amphenol ICC. All variants maintain identical electrical and mechanical specifications to the FCC17E09SA690 with the following distinctions:

All FCE17 variants carry Active product status, eliminating obsolescence risk
All FCE17 variants are RoHS Compliant, meeting current environmental regulations
Dielectric material composition includes glass-filled thermoplastic formulations, enhancing mechanical stability
Contact finish specifications remain at 15.0µin (0.38µm) gold plating
Current rating, voltage rating, operating temperature range, and flange configuration remain equivalent

Selection among FCE17 variants is determined by inventory availability and specific packaging requirements. FCE17E09SA680 offers the highest inventory level (1066 units), followed by FCE17E09SA650 (992 units) and FCE17E09SA6D0 (1002 units).

Secondary Substitutes (HARTING Series):

The HARTING 09661136602 and 09661526610 connectors provide functional alternatives with the following considerations:

Both HARTING variants maintain 9-position, 2-row D-Sub receptacle configuration with through-hole, right-angle solder termination
Current rating is elevated to 6.5A, exceeding the 5A specification of the primary part
Operating temperature range extends to -55°C ~ 125°C, providing broader thermal capability
Backset spacing differs at 0.409" (10.40mm), requiring PCB layout verification
Contact finish specifications are not provided; gold plating cannot be confirmed
ROHS3 Compliance status indicates enhanced regulatory adherence
09661526610 includes Board Lock feature; 09661136602 does not specify this feature

HARTING variants are suitable for applications where elevated current capacity and extended temperature range provide design advantages, provided PCB layout accommodates the increased backset spacing.

Frequently Asked Questions (FAQ)

Q: Can FCE17E09SA690 directly replace FCC17E09SA690 without PCB modification?

A: Yes. The FCE17E09SA690 maintains identical electrical and mechanical specifications, including backset spacing (0.318"), flange configuration (M3), and solder termination. No PCB layout changes are required. The primary difference is product status (Active versus Obsolete) and RoHS compliance.

Q: What is the difference between the multiple FCE17 variants (SA600, SA610, SA640, SA650, SA680, SA6D0, SA6E0)?

A: All FCE17 variants are parametrically equivalent and interchangeable. Differences exist only in internal design specifications not affecting electrical or mechanical performance. Selection is based on inventory availability and packaging preferences. No functional distinction exists between variants for standard applications.

Q: Are HARTING 09661136602 and 09661526610 direct replacements?

A: These HARTING connectors are functional alternatives, not direct replacements. The backset spacing differs (0.409" versus 0.318"), requiring PCB layout verification before substitution. Contact finish specifications are not provided for HARTING parts. Use HARTING variants only when elevated current capacity (6.5A) and extended temperature range (-55°C ~ 125°C) provide design benefits and PCB layout permits the increased backset spacing.

Q: Why is RoHS compliance important for this substitution?

A: The original FCC17E09SA690 is RoHS non-compliant. All FCE17 variants and HARTING alternatives are RoHS Compliant or ROHS3 Compliant, meeting current environmental regulations and supply chain requirements. RoHS compliance is mandatory for many applications and procurement specifications.

Q: What is the significance of the dielectric material change from Thermoplastic to Thermoplastic, Glass Filled?

A: Glass-filled thermoplastic formulations in FCE17 variants provide enhanced mechanical stability and thermal performance compared to unfilled thermoplastic in the original FCC17E09SA690. This change improves connector durability and reliability without affecting electrical specifications or mechanical compatibility.

Q: Can I use HARTING 09661526610 if my application requires the Board Lock feature?

A: Yes. HARTING 09661526610 includes the Board Lock feature, matching the FCC17E09SA690 specification. However, verify that the increased backset spacing (0.409" versus 0.318") is compatible with your PCB layout before proceeding with substitution.

Q: What inventory considerations should guide my selection?

A: FCE17E09SA680 offers the highest inventory (1066 units), followed by FCE17E09SA650 (992 units) and FCE17E09SA6D0 (1002 units). For immediate procurement, these variants provide the best availability. HARTING 09661136602 (629 units) and 09661526610 (751 units) are available but require backset spacing verification.

Q: Is the voltage rating difference between FCC17E09SA690 (200V) and FCE17 variants (unspecified) a concern?

A: No. The unspecified voltage rating in FCE17 variants does not indicate reduced capability. Amphenol ICC maintains equivalent electrical performance across the FCC17 and FCE17 series. The 200V specification of the original part is preserved in all FCE17 substitutes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message