FCC17E09SA60B D-Sub 9-Position Receptacle Equivalent & Substitute Parts

Part Overview

The FCC17E09SA60B is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder-terminated connector features female sockets with a DE/E shell size (1) and board-side M3 flange. The part is classified as obsolete, necessitating identification of active equivalent and substitute components that maintain functional compatibility for new designs and ongoing production requirements.

Key Parameters

Parameter	FCC17E09SA60B Value
Connector Style	D-Sub
Connector Type	Receptacle, Female Sockets
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Shell Material, Finish	Steel, Tin Plated
Contact Type	Signal
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Material Flammability Rating	UL94 V-0
Moisture Sensitivity Level (MSL)	1 (Unlimited)
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution of the FCC17E09SA60B is determined by strict alignment of the following critical parameters:

Primary Compatibility Criteria:

Connector style (D-Sub)
Connector type (Receptacle, Female Sockets)
Number of positions (9)
Number of rows (2)
Shell size and layout (1 / DE, E)
Mounting type (Through Hole, Right Angle)
Termination method (Solder)
Material flammability rating (UL94 V-0)
Moisture sensitivity level (MSL 1)

Secondary Compatibility Criteria:

Current rating (5A minimum)
Voltage rating (200V minimum)
Operating temperature range (must encompass -40°C to 85°C)

Acceptable Variations:

Flange feature type (Board Side M3, Housing/Shell M3, Housing/Shell 4-40, Housing/Shell Unthreaded)
Shell material finish (Steel with or without tin plating)
Contact finish (Gold or unspecified)
Contact form (Machined or Stamped)
Dielectric material composition (Thermoplastic Glass Filled, PBT Glass Filled, or PCT Glass Filled)
Contact material (Phosphor Bronze or Copper Alloy)
Product status (Active substitutes preferred over obsolete)
RoHS compliance status (both compliant and non-compliant parts listed)

Parameter Comparison

Part Number	Manufacturer	Positions	Shell Size	Mounting	Termination	Current (A)	Voltage (V)	Temp Range (°C)	UL94	Product Status	RoHS
FCC17E09SA60B	Amphenol ICC	9	1 (DE, E)	Through Hole, R/A	Solder	5	200	-40 ~ 85	V-0	Obsolete	Non-compliant
FCE17E09SA60B	Amphenol ICC	9	1 (DE, E)	Through Hole, R/A	Solder	5	—	-40 ~ 85	V-0	Active	Compliant
09661136602	HARTING	9	1 (DE, E)	Through Hole, R/A	Solder	6.5	—	-55 ~ 125	V-0	Active	ROHS3 Compliant
09661526610	HARTING	9	1 (DE, E)	Through Hole, R/A	Solder	6.5	—	-55 ~ 125	V-0	Active	ROHS3 Compliant
09661526611	HARTING	9	1 (DE, E)	Through Hole, R/A	Solder	6.5	—	-55 ~ 125	V-0	Active	ROHS3 Compliant
09661526615	HARTING	9	1 (DE, E)	Through Hole, R/A	Solder	6.5	—	-55 ~ 125	V-0	Active	ROHS3 Compliant
09661527611	HARTING	9	1 (DE, E)	Through Hole, R/A	Solder	6.5	—	-55 ~ 125	V-0	Active	ROHS3 Compliant
09661527612	HARTING	9	1 (DE, E)	Through Hole, R/A	Solder	6.5	—	-55 ~ 125	V-0	Active	ROHS3 Compliant
09661527615	HARTING	9	1 (DE, E)	Through Hole, R/A	Solder	6.5	—	-55 ~ 125	V-0	Active	ROHS3 Compliant
09661527616	HARTING	9	1 (DE, E)	Through Hole, R/A	Solder	6.5	—	-55 ~ 125	V-0	Active	ROHS3 Compliant
09661566611	HARTING	9	1 (DE, E)	Through Hole, R/A	Solder	6.5	—	-55 ~ 125	V-0	Active	ROHS3 Compliant

Engineering Selection Recommendations

Primary Substitute (Amphenol ICC Manufacturer Family):

FCE17E09SA60B is the direct active equivalent from Amphenol ICC (Commercial Products). This part maintains identical mechanical and electrical specifications to the FCC17E09SA60B while offering RoHS compliance status. The FCE17 series represents the current production line replacement for the obsolete FCC17 series. Selection of FCE17E09SA60B is appropriate for applications requiring manufacturer continuity and established supply chain relationships with Amphenol ICC.

Secondary Substitutes (HARTING Manufacturer Family):

The HARTING 9-position D-Sub receptacle connectors (09661136602, 09661526610, 09661526611, 09661526615, 09661527611, 09661527612, 09661527615, 09661527616, 09661566611) provide functional equivalence with enhanced electrical performance characteristics. These parts deliver 6.5A current rating (versus 5A on the original), extended operating temperature range (-55°C to 125°C versus -40°C to 85°C), and ROHS3 compliance. All HARTING substitutes maintain the required 9-position, 2-row, DE/E shell size configuration with through-hole right-angle solder termination and UL94 V-0 flammability rating.

Flange Feature Differentiation:

HARTING substitutes are available with four flange configurations: Housing/Shell M3 (09661526611, 09661526615, 09661527611, 09661527615, 09661566611), Housing/Shell 4-40 (09661136602, 09661527612, 09661527616), Housing/Shell Unthreaded (09661526610), and Board Side M3 (original FCC17E09SA60B). Selection between these variants depends on PCB mounting hole specifications and mechanical assembly requirements.

Packaging Considerations:

Amphenol ICC FCE17E09SA60B is supplied in standard packaging. HARTING substitutes are available in Bulk or Tray packaging formats. Packaging selection should align with production volume requirements and inventory management protocols.

Compliance Status:

For applications subject to RoHS directives, FCE17E09SA60B and all HARTING substitutes (ROHS3 Compliant) are appropriate selections. The original FCC17E09SA60B is RoHS non-compliant and should be replaced in new designs targeting RoHS-regulated markets.

Frequently Asked Questions (FAQ)

Q: Can FCE17E09SA60B directly replace FCC17E09SA60B in existing designs?

A: Yes. FCE17E09SA60B maintains identical connector geometry, pin configuration, electrical ratings, and mounting specifications. The primary difference is active product status and RoHS compliance. No design modifications are required for mechanical or electrical integration.

Q: What are the key differences between Amphenol ICC and HARTING substitutes?

A: Amphenol ICC FCE17E09SA60B preserves the original 5A current rating and -40°C to 85°C operating range. HARTING substitutes provide enhanced specifications: 6.5A current rating and -55°C to 125°C operating range. Both maintain identical shell size, position count, and solder termination. HARTING parts feature stamped contacts versus machined contacts on the original, and use copper alloy contact material versus phosphor bronze.

Q: How do flange feature variations affect substitution?

A: Flange features determine PCB mounting hole patterns and mechanical fastening methods. Board Side M3 (original configuration) uses M3 threaded holes on the PCB. Housing/Shell M3 variants use M3 threaded holes on the connector housing. Housing/Shell 4-40 variants use 4-40 threaded holes. Housing/Shell Unthreaded variants use press-fit or friction-lock mounting. Selection depends on existing PCB hole specifications. Flange feature changes require PCB layout verification but do not affect electrical compatibility.

Q: Are HARTING substitutes electrically compatible with the original FCC17E09SA60B?

A: Yes. All HARTING substitutes meet or exceed the original electrical specifications. The 6.5A current rating exceeds the 5A requirement. The extended temperature range (-55°C to 125°C) encompasses the original range (-40°C to 85°C). Both maintain 9-position, 2-row configuration, UL94 V-0 flammability rating, and MSL 1 moisture sensitivity level. Signal contact type and solder termination are identical.

Q: What is the significance of contact form differences (Machined vs. Stamped)?

A: Contact form affects manufacturing process and cost structure but does not alter electrical performance or mechanical compatibility. Machined contacts (original FCC17E09SA60B) are individually formed. Stamped contacts (HARTING substitutes) are mass-produced from sheet material. Both contact forms deliver equivalent signal integrity, current capacity, and durability for D-Sub applications.

Q: Should I select FCE17E09SA60B or HARTING substitutes for new production?

A: FCE17E09SA60B is appropriate for applications requiring manufacturer continuity with Amphenol ICC and preservation of original electrical specifications. HARTING substitutes are appropriate for applications benefiting from enhanced current capacity, extended temperature range, and ROHS3 compliance. Both are active products with established supply availability. Selection should align with design requirements, supply chain preferences, and regulatory compliance mandates.

Q: Are there inventory considerations when selecting substitutes?

A: Yes. Current inventory levels are: FCC17E09SA60B (1079 pcs), FCE17E09SA60B (760 pcs), HARTING 09661136602 (629 pcs), 09661526610 (751 pcs), 09661526611 (769 pcs), 09661526615 (1125 pcs), 09661527611 (773 pcs), 09661527612 (1115 pcs), 09661527615 (1028 pcs), 09661527616 (737 pcs), 09661566611 (1170 pcs). Inventory levels support both immediate replacement and long-term production planning across all substitute options.

Q: What is the difference between ROHS3 Compliant and RoHS Compliant designations?

A: ROHS3 Compliant indicates compliance with the third iteration of the Restriction of Hazardous Substances directive, incorporating the most current restrictions on hazardous materials. RoHS Compliant (FCE17E09SA60B) indicates compliance with RoHS requirements without specific version designation. Both designations confirm absence of restricted substances. The original FCC17E09SA60B is RoHS non-compliant and contains restricted materials.

Q: Can I mix FCC17E09SA60B and substitute parts in the same assembly?

A: Yes. All substitute parts are mechanically and electrically compatible with the original FCC17E09SA60B. Mixed usage is acceptable from a functional standpoint. However, design documentation and bill of materials should reflect the specific part numbers used to maintain traceability and support future maintenance or replacement activities.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message