FCC17E09SA4DB D-Sub 9-Position Receptacle Equivalent & Substitute Parts

Part Overview

The FCC17E09SA4DB is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder-terminated connector features female sockets with a DE/E shell size (1) and board-side 4-40 flange mounting. The part is classified as obsolete, necessitating identification of active equivalent and substitute components for ongoing production and maintenance applications.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Receptacle, Female Sockets
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution of the FCC17E09SA4DB is determined by strict alignment of the following parameters:

Critical Matching Parameters:

Connector style: D-Sub
Connector type: Receptacle, Female Sockets
Number of positions: 9
Number of rows: 2
Shell size and layout: 1 (DE, E)
Mounting type: Through Hole, Right Angle
Termination method: Solder
Material flammability rating: UL94 V-0
Moisture sensitivity level: 1 (Unlimited)

Allowable Variations:

Current rating: Substitute parts rated at 6.5A exceed the 5A requirement and are acceptable
Voltage rating: Substitute parts without specified voltage rating do not violate the 200V requirement
Operating temperature: Substitute parts with extended ranges (-55°C ~ 125°C) exceed the -40°C ~ 85°C requirement and are acceptable
Contact finish and finish thickness: Variations in gold plating or absence of specification do not preclude substitution
Flange feature design: Board-side, housing/shell, and threaded variants accommodate different mounting configurations
Shell material finish: Steel with or without tin plating maintains structural and electrical integrity
Contact material: Phosphor bronze and copper alloy compositions are functionally equivalent
Dielectric material: Thermoplastic glass-filled and polyester/PBT variants meet UL94 V-0 requirements
RoHS compliance: Active substitute parts with RoHS3 compliance are acceptable for new designs
Product status: Active parts are preferred over obsolete components

Parameter Comparison

Parameter	FCC17E09SA4DB	FCE17E09SA4DB	09661136602	09661526610	09661526611	09661526615	09661527611	09661527612	09661527615	09661527616	09661566611
Manufacturer	Amphenol ICC	Amphenol ICC	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING
Connector Style	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A
Voltage Rating	200V	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Primary Substitute: FCE17E09SA4DB (Amphenol ICC)

The FCE17E09SA4DB is the direct active equivalent from the same manufacturer. It maintains identical electrical and mechanical specifications to the FCC17E09SA4DB while offering RoHS compliance and active product status. This part is the preferred choice for direct replacement in existing designs.

Secondary Substitutes: HARTING 09661526610, 09661526611, 09661526615, 09661527611, 09661527612, 09661527615, 09661527616, 09661566611

All HARTING D-Sub 9-position receptacle variants listed meet the critical substitution parameters. These parts are active, RoHS3 compliant, and rated for higher current (6.5A) and extended operating temperature (-55°C ~ 125°C). Selection among HARTING variants depends on specific flange feature requirements:

4-40 threaded flange: 09661527612, 09661527616
M3 threaded flange: 09661526611, 09661526615, 09661527611, 09661527615, 09661566611
Unthreaded flange: 09661526610

All HARTING variants include board lock features except 09661136602.

Tertiary Substitute: 09661136602 (HARTING)

This variant lacks board lock features and has a different backset spacing (0.409" vs. 0.318"), making it suitable only when mechanical constraints permit these differences.

Compliance Considerations:

For applications requiring RoHS compliance, FCE17E09SA4DB and all HARTING variants are acceptable. The original FCC17E09SA4DB is RoHS non-compliant and should be replaced in new designs subject to RoHS directives.

Frequently Asked Questions (FAQ)

Q: Can the FCE17E09SA4DB directly replace the FCC17E09SA4DB?

A: Yes. The FCE17E09SA4DB is functionally equivalent with identical connector specifications, electrical ratings, and mechanical dimensions. The primary difference is active product status and RoHS compliance.

Q: What is the difference between the Amphenol ICC and HARTING substitutes?

A: Both manufacturers produce functionally equivalent 9-position D-Sub receptacles meeting the same critical parameters. HARTING variants offer higher current rating (6.5A vs. 5A) and extended operating temperature range (-55°C ~ 125°C vs. -40°C ~ 85°C). Amphenol ICC FCE17E09SA4DB maintains the original 5A rating and -40°C ~ 85°C range.

Q: Are the different HARTING part numbers interchangeable?

A: HARTING variants differ in flange feature design and packaging. All meet the core electrical and mechanical requirements. Selection depends on PCB mounting hole configuration and fastener availability. Verify flange type compatibility before substitution.

Q: What does the backset spacing difference mean?

A: Backset spacing is the distance from the connector mounting face to the rear of the connector body. The FCC17E09SA4DB has 0.318" (8.08mm) backset, while most HARTING variants have 0.409" (10.40mm). This affects PCB layout and clearance requirements. Verify PCB design accommodates the selected part's backset spacing.

Q: Can I use a HARTING part in place of the Amphenol ICC part?

A: Yes, provided the flange feature and backset spacing are compatible with the PCB design. All listed HARTING variants meet the electrical and mechanical substitution criteria. Confirm mounting hole pattern and fastener requirements match the PCB design.

Q: What is the significance of RoHS compliance?

A: RoHS compliance indicates the connector meets restrictions on hazardous substances. For new designs or applications subject to RoHS directives, FCE17E09SA4DB or HARTING variants (all RoHS3 compliant) are required. The original FCC17E09SA4DB is RoHS non-compliant and unsuitable for RoHS-regulated applications.

Q: Does the higher current rating of HARTING parts affect compatibility?

A: No. A 6.5A-rated connector is compatible with circuits designed for 5A operation. The higher rating provides additional safety margin and does not introduce incompatibility.

Q: What packaging options are available?

A: Amphenol ICC FCE17E09SA4DB is supplied in box packaging. HARTING variants are available in bulk, tray, or bulk packaging depending on part number. Verify packaging requirements for procurement and handling procedures.

Q: Are there any temperature-related constraints for HARTING substitutes?

A: HARTING variants operate across -55°C ~ 125°C, exceeding the original -40°C ~ 85°C range. This extended capability is compatible with the original specification and introduces no constraints for applications within the original temperature range.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message