FCC17E09SA280 D-Sub Receptacle Equivalent & Substitute Parts

Part Overview

The FCC17E09SA280 is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder-terminated connector features female sockets with a DE/E shell size (1), gold-plated phosphor bronze contacts, and board lock functionality. The part is classified as obsolete, necessitating identification of active equivalent and substitute components for ongoing design and procurement requirements. Equivalent parts maintain identical electrical and mechanical specifications, while substitute parts satisfy the same functional requirements within defined parameter tolerances.

Key Parameters

Parameter	FCC17E09SA280 Specification
Connector Type	Receptacle, Female Sockets
Number of Positions	9
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating	5A
Voltage Rating	200V
Operating Temperature Range	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold, 15.0µin (0.38µm)
Contact Material	Phosphor Bronze
Flange Feature	Housing/Shell (Unthreaded)
Features	Board Lock, Filter
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitute parts for the FCC17E09SA280 are classified into two categories based on parametric alignment:

Category 1: Amphenol ICC FCE17 Series (Active, RoHS Compliant)

The FCE17E09SA280, FCE17E09SA200, FCE17E09SA210, FCE17E09SA240, FCE17E09SA250, FCE17E09SA290, FCE17E09SA2D0, and FCE17E09SA2E0 are direct parametric equivalents from Amphenol ICC's active product line. These parts maintain identical specifications across all critical parameters: 9-position receptacle configuration, DE/E shell size, through-hole right-angle solder termination, 5A current rating, UL94 V-0 flammability rating, phosphor bronze contacts with gold plating, board lock and filter features, and -40°C to 85°C operating temperature range. The primary distinction is RoHS compliance status (these parts are RoHS compliant versus the non-compliant FCC17E09SA280) and dielectric material composition (thermoplastic with glass fill versus standard thermoplastic). Voltage rating specifications are not provided for FCE17 variants. These parts are suitable for direct replacement in applications where RoHS compliance is required or preferred.

Category 2: HARTING 09661 Series (Active, ROHS3 Compliant)

The HARTING 09661136602 and 09661526610 are functional substitutes that satisfy the core D-Sub receptacle requirements but with parameter variations. Both maintain 9-position receptacle configuration, DE/E shell size, through-hole right-angle solder termination, and UL94 V-0 flammability rating. Differences include higher current rating (6.5A versus 5A), increased backset spacing (0.409" versus 0.318"), stamped contact form (versus machined), copper alloy contacts (versus phosphor bronze), and extended operating temperature range (-55°C to 125°C versus -40°C to 85°C). The 09661136602 features a 4-40 threaded flange, while 09661526610 maintains unthreaded housing. These parts are ROHS3 compliant and suitable for applications requiring enhanced thermal performance or higher current capacity.

Parameter Comparison

Parameter	FCC17E09SA280	FCE17E09SA280	FCE17E09SA200	FCE17E09SA210	FCE17E09SA240	FCE17E09SA250	FCE17E09SA290	FCE17E09SA2D0	FCE17E09SA2E0	09661136602	09661526610
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Voltage Rating	200V	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified
Operating Temperature Range	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold, 15.0µin (0.38µm)	Gold, 15.0µin (0.38µm)	Gold, 15.0µin (0.38µm)	Gold, 15.0µin (0.38µm)	Gold, 15.0µin (0.38µm)	Gold, 15.0µin (0.38µm)	Gold, 15.0µin (0.38µm)	Gold, 15.0µin (0.38µm)	Gold, 15.0µin (0.38µm)	Not Specified	Not Specified
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Flange Feature	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)	Housing/Shell (4-40)	Housing/Shell (Unthreaded)
Features	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	None Specified	Board Lock
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Backset Spacing	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.409" (10.40mm)	0.409" (10.40mm)

Engineering Selection Recommendations

For RoHS Compliance Requirements:

The FCE17 series (FCE17E09SA280, FCE17E09SA200, FCE17E09SA210, FCE17E09SA240, FCE17E09SA250, FCE17E09SA290, FCE17E09SA2D0, FCE17E09SA2E0) from Amphenol ICC are the primary recommended substitutes. These parts maintain identical electrical and mechanical specifications to the FCC17E09SA280 while providing RoHS compliance. All FCE17 variants are active products with substantial inventory availability (678–998 units). The FCE17 series maintains the same connector geometry, contact specifications, and functional features (board lock, filter) as the original part. Selection among FCE17 variants should be based on specific application requirements, as all variants share identical core specifications.

For Extended Operating Temperature or Higher Current Applications:

The HARTING 09661526610 provides an alternative with extended thermal performance (-55°C to 125°C operating range) and higher current capacity (6.5A). This part maintains unthreaded housing, board lock functionality, and UL94 V-0 flammability rating. The 09661526610 is ROHS3 compliant and actively produced with 751 units in stock. The increased backset spacing (0.409" versus 0.318") requires PCB layout verification for compatibility.

For Applications with Threaded Flange Requirements:

The HARTING 09661136602 offers a 4-40 threaded flange option with equivalent electrical performance and extended operating temperature range. This part is suitable for applications requiring mechanical fastening through the connector flange.

Product Status Consideration:

The FCC17E09SA280 is classified as obsolete. All recommended substitutes are active products with ongoing manufacturing support and inventory availability, ensuring long-term supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can FCE17E09SA280 directly replace FCC17E09SA280 in existing designs?

A: Yes. The FCE17E09SA280 maintains identical specifications across all critical parameters: 9-position receptacle, DE/E shell size, through-hole right-angle solder termination, 5A current rating, -40°C to 85°C operating temperature, UL94 V-0 flammability rating, phosphor bronze contacts with gold plating, and board lock/filter features. The primary difference is RoHS compliance status. No design modifications are required for direct substitution.

Q: What is the difference between the multiple FCE17E09SA variants (SA200, SA210, SA240, SA250, SA290, SA2D0, SA2E0)?

A: All FCE17E09SA variants share identical electrical and mechanical specifications. The suffix designations (SA200, SA210, SA240, SA250, SA290, SA2D0, SA2E0) represent internal Amphenol ICC product differentiation codes. From an engineering perspective, these parts are functionally equivalent and interchangeable. Selection should be based on inventory availability and procurement lead times.

Q: Are HARTING 09661 series connectors compatible with FCC17E09SA280 applications?

A: The HARTING 09661 series maintains functional compatibility for 9-position D-Sub receptacle applications with identical shell size and solder termination. However, backset spacing differs (0.409" versus 0.318"), requiring PCB layout verification. The HARTING parts provide higher current capacity (6.5A versus 5A) and extended operating temperature range (-55°C to 125°C versus -40°C to 85°C). These characteristics make HARTING parts suitable for applications with enhanced thermal or current requirements, but PCB redesign may be necessary.

Q: What is the significance of the backset spacing difference between FCC17E09SA280 and HARTING 09661 series?

A: Backset spacing defines the distance from the connector mounting surface to the contact plane. The FCC17E09SA280 specifies 0.318" (8.08mm), while HARTING 09661 series specifies 0.409" (10.40mm). This difference affects PCB layout and mating connector positioning. Direct substitution without PCB modification is not possible if backset spacing tolerance is critical to the application.

Q: Is RoHS compliance mandatory for selecting a substitute part?

A: RoHS compliance requirements depend on application jurisdiction and customer specifications. The FCC17E09SA280 is RoHS non-compliant, while FCE17 series parts are RoHS compliant and HARTING 09661 series parts are ROHS3 compliant. For applications subject to RoHS regulations or customer mandates, RoHS-compliant substitutes are required. For legacy or non-regulated applications, RoHS status is not a technical constraint.

Q: Can I use HARTING 09661136602 (with 4-40 threaded flange) instead of 09661526610 (unthreaded)?

A: Both HARTING parts maintain identical electrical specifications and operating characteristics. The 09661136602 features a 4-40 threaded flange for mechanical fastening, while 09661526610 has unthreaded housing. Selection depends on mechanical mounting requirements. The threaded flange option (09661136602) is suitable for applications requiring screw-fastened connector retention. The unthreaded option (09661526610) is compatible with board lock mechanisms.

Q: What inventory status should I consider when selecting a substitute?

A: All recommended substitutes are active products with current inventory: FCE17 series variants (678–998 units), HARTING 09661136602 (629 units), and HARTING 09661526610 (751 units). The FCC17E09SA280 is obsolete with 777 units remaining in stock. For new designs or long-term production, active products (FCE17 or HARTING series) are recommended to ensure supply chain continuity beyond current inventory depletion.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message