FCC17E09PC65B Equivalent & Substitute Parts

Part Overview

The FCC17E09PC65B is a 9-position D-Sub plug connector with right-angle solder termination, manufactured by Amphenol ICC (Commercial Products). This connector features male pins, board-side M3 flange mounting, and is designed for through-hole PCB assembly applications. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for ongoing production and repair applications.

Key Parameters

Parameter	FCC17E09PC65B
Connector Type	D-Sub Plug, Male Pins
Number of Positions	9
Shell Size / Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Shell Material / Finish	Steel, Tin Plated
Contact Finish	Gold, 15.0µin (0.38µm)
Flange Feature	Board Side (M3)
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution of the FCC17E09PC65B is determined by strict equivalence across the following critical parameters:

Primary Equivalence Criteria:

Connector type: D-Sub plug with male pins
Position count: 9 positions
Shell size and layout: 1 (DE, E)
Mounting configuration: Through hole, right angle
Termination method: Solder
Flange type: Board side with M3 mounting holes
Current rating: 5A minimum
Operating temperature range: -40°C to 85°C minimum
Material flammability: UL94 V-0

Amphenol ICC FCE17 Series (FCE17E09PC65B, FCE17E09PC60B, FCE17E09PC61B, FCE17E09PC64B, FCE17E09PC68B, FCE17E09PC69B, FCE17E09PC6DB, FCE17E09PC6EB) represent direct parametric equivalents within the same manufacturer's active product line. These parts maintain identical mechanical interfaces, electrical ratings, and connector geometry while offering RoHS compliance status.

HARTING 09651626815 and 09651626816 provide functional equivalence with notable parameter variations: increased current rating (6.5A), extended operating temperature range (-55°C to 125°C), different backset spacing (0.409" vs. 0.590"), and housing-mounted flange configuration (M3 or 4-40 variants). These parts are suitable for applications where enhanced thermal performance and higher current capacity are acceptable.

Parameter Comparison

Parameter	FCC17E09PC65B	FCE17E09PC65B	FCE17E09PC60B	FCE17E09PC61B	FCE17E09PC64B	FCE17E09PC68B	FCE17E09PC69B	FCE17E09PC6DB	FCE17E09PC6EB	09651626815	09651626816
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Shell Size / Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Backset Spacing	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.409" (10.40mm)	0.409" (10.40mm)
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Shell Material / Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Gold, 15.0µin	Not specified	Not specified
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Amphenol ICC FCE17 Series Selection (FCE17E09PC65B, FCE17E09PC60B, FCE17E09PC61B, FCE17E09PC64B, FCE17E09PC68B, FCE17E09PC69B, FCE17E09PC6DB, FCE17E09PC6EB):

These connectors are the primary substitutes for FCC17E09PC65B. All FCE17 variants maintain identical mechanical and electrical specifications while offering active product status and RoHS compliance. The FCE17 series provides direct form-fit-function replacement with no design modifications required. Selection among FCE17 variants depends on packaging requirements and inventory availability. FCE17E09PC68B offers the highest inventory level (1085 units) and is packaged in boxes, suitable for production environments.

HARTING 09651626815 and 09651626816 Selection:

These HARTING connectors provide functional equivalence with design trade-offs. The increased current rating (6.5A vs. 5A) and extended operating temperature range (-55°C to 125°C vs. -40°C to 85°C) offer enhanced performance margins for demanding applications. However, the reduced backset spacing (0.409" vs. 0.590") requires PCB layout verification to confirm mechanical compatibility. The housing-mounted flange configuration differs from the board-side mounting of the original part. ROHS3 compliance status meets current regulatory requirements. These parts are suitable for applications where thermal performance enhancement justifies mechanical interface verification.

Compliance Considerations:

The FCC17E09PC65B is RoHS non-compliant. All Amphenol ICC FCE17 alternatives are RoHS compliant, meeting current regulatory requirements for new designs and production. HARTING parts are ROHS3 compliant. Selection of compliant alternatives is necessary for applications subject to RoHS directives.

Frequently Asked Questions (FAQ)

Q: Can FCE17E09PC65B directly replace FCC17E09PC65B without PCB modifications?

A: Yes. FCE17E09PC65B maintains identical mechanical dimensions, backset spacing (0.590"), flange mounting configuration (board side M3), and electrical ratings (5A, 200V). No PCB layout changes are required for direct substitution.

Q: What is the difference between the various FCE17E09PC6xB variants?

A: All FCE17E09PC6xB variants (PC60B, PC61B, PC64B, PC65B, PC68B, PC69B, PC6DB, PC6EB) share identical electrical and mechanical specifications. Differences are limited to internal contact or shell configuration details not specified in the provided parameters. Selection can be based on availability and packaging preference.

Q: Are HARTING 09651626815 and 09651626816 drop-in replacements?

A: These HARTING connectors provide functional equivalence with mechanical differences. The backset spacing is reduced from 0.590" to 0.409", requiring PCB layout verification. The flange is housing-mounted rather than board-side mounted. These differences necessitate design review before implementation. The increased current rating (6.5A) and extended temperature range (-55°C to 125°C) provide performance enhancements suitable for demanding applications.

Q: What is the difference between HARTING 09651626815 and 09651626816?

A: Both parts are functionally equivalent 9-position D-Sub plugs with identical electrical and thermal specifications. The primary difference is the flange mounting configuration: 09651626815 uses M3 mounting holes, while 09651626816 uses 4-40 mounting holes. Selection depends on the PCB mounting hole pattern.

Q: Is RoHS compliance required for my application?

A: RoHS compliance is mandatory for products sold in the European Union and many other markets. The FCC17E09PC65B is RoHS non-compliant. All Amphenol ICC FCE17 alternatives are RoHS compliant, and HARTING parts are ROHS3 compliant. For new designs and ongoing production, RoHS-compliant alternatives are required.

Q: What packaging options are available?

A: Amphenol ICC FCE17E09PC68B is packaged in boxes, suitable for production environments. Other FCE17 variants have unspecified packaging. HARTING 09651626815 is supplied in bulk packaging, while 09651626816 is supplied in bags. Packaging selection depends on production volume and handling requirements.

Q: Can I use a substitute with a higher current rating (6.5A vs. 5A)?

A: Yes. A connector rated for 6.5A can safely carry 5A loads. The higher rating provides additional margin and does not create compatibility issues. This is a conservative design practice suitable for applications requiring enhanced reliability.

Q: What is the significance of the contact finish thickness specification?

A: The FCC17E09PC65B specifies gold contact finish at 15.0µin (0.38µm). All Amphenol ICC FCE17 alternatives maintain this specification, ensuring equivalent contact resistance and corrosion protection. HARTING parts do not specify contact finish thickness, representing a potential difference in contact durability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message