FCC17E09PC640 D-Sub Plug Connector Equivalent & Substitute Parts

Part Overview

The FCC17E09PC640 is a 9-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This right-angle, through-hole solder connector features male pins with a DE/E shell size (1) and is designed for signal applications. The connector incorporates board lock, filter, and grounding indent features with a steel tin-plated shell and gold-plated phosphor bronze contacts.

The FCC17E09PC640 is classified as obsolete. Equivalent and substitute parts are necessary to maintain design continuity, ensure component availability, and support ongoing production and field service requirements. Active alternatives provide comparable electrical and mechanical performance while offering improved availability and compliance status.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Material	Phosphor Bronze
Flange Feature	Housing/Shell (M3)
Material Flammability Rating	UL94 V-0
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the FCC17E09PC640 is determined by strict equivalence across the following critical parameters:

Primary Substitution Criteria:

Connector style (D-Sub)
Connector type (Plug, Male Pins)
Number of positions (9)
Number of rows (2)
Shell size and layout (1 / DE, E)
Mounting type (Through Hole, Right Angle)
Termination method (Solder)
Contact type (Signal)
Flange feature (Housing/Shell)
Material flammability rating (UL94 V-0)
Moisture sensitivity level (MSL 1)

Secondary Compatibility Parameters:

Current rating (5A minimum)
Operating temperature range (-40°C to 85°C minimum)
Shell material (Steel)
Contact material (Phosphor Bronze or equivalent copper alloy)

Substitute parts are grouped into two categories: Amphenol ICC FCE17 series variants (active status, RoHS compliant) and HARTING alternatives (active status, ROHS3 compliant). All listed substitutes maintain functional and mechanical compatibility with the original FCC17E09PC640 design.

Parameter Comparison

Parameter	FCC17E09PC640	FCE17E09PC640	FCE17E09PC600	FCE17E09PC610	FCE17E09PC650	FCE17E09PC680	FCE17E09PC690	FCE17E09PC6D0	FCE17E09PC6E0	09651626815	09651626816
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Shell Material	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Amphenol ICC FCE17 Series (FCE17E09PC640, FCE17E09PC600, FCE17E09PC610, FCE17E09PC650, FCE17E09PC680, FCE17E09PC690, FCE17E09PC6D0, FCE17E09PC6E0)

The FCE17 series variants are direct functional equivalents to the FCC17E09PC640. All FCE17 models maintain identical electrical and mechanical specifications, including 9-position configuration, 5A current rating, -40°C to 85°C operating temperature range, and UL94 V-0 flammability rating. All FCE17 variants are active products with RoHS compliance status, providing improved component availability and regulatory alignment compared to the obsolete FCC17E09PC640. The FCE17 series incorporates thermoplastic glass-filled dielectric material, enhancing mechanical robustness. These parts are suitable for direct substitution in new designs and field replacements.

HARTING 09651626815 and 09651626816

The HARTING alternatives (09651626815 and 09651626816) provide functional compatibility with enhanced performance characteristics. Both HARTING parts maintain the 9-position D-Sub plug configuration, through-hole right-angle mounting, and solder termination. HARTING connectors feature a higher current rating of 6.5A compared to the 5A rating of the FCC17E09PC640, and an extended operating temperature range of -55°C to 125°C. Both HARTING parts are ROHS3 compliant and REACH unaffected. The primary mechanical difference is backset spacing: HARTING parts specify 0.409" (10.40mm) compared to 0.590" (14.99mm) for Amphenol parts. This spacing difference requires verification for PCB layout compatibility before substitution. HARTING parts employ stamped copper alloy contacts rather than machined phosphor bronze, and feature polybutylene terephthalate (PBT) glass-filled dielectric material.

Substitution Priority:

For direct replacement requiring no design modification, select from the Amphenol ICC FCE17 series variants. For applications requiring extended temperature range or higher current capacity, evaluate HARTING alternatives with consideration for backset spacing compatibility.

Frequently Asked Questions (FAQ)

Q: Can the FCE17E09PC640 directly replace the FCC17E09PC640 without PCB modification?

A: Yes. The FCE17E09PC640 maintains identical electrical and mechanical specifications to the FCC17E09PC640, including shell size (1 / DE, E), mounting type (through-hole right angle), backset spacing (0.590" / 14.99mm), and current/voltage ratings. No PCB layout changes are required.

Q: What is the difference between the various FCE17 part numbers (PC600, PC610, PC650, PC680, PC690, PC6D0, PC6E0)?

A: The FCE17 variants differ in internal contact configuration or shell finish specifications indicated by the suffix code. All variants maintain identical external dimensions, mounting characteristics, and electrical performance. Selection among FCE17 variants depends on specific internal contact requirements for your application.

Q: Are the HARTING parts (09651626815 and 09651626816) compatible with the FCC17E09PC640?

A: HARTING parts are functionally compatible for 9-position D-Sub plug applications with the same connector style, type, and mounting method. However, the backset spacing differs: HARTING specifies 0.409" (10.40mm) versus 0.590" (14.99mm) for Amphenol parts. This spacing difference affects PCB hole positioning and requires verification before substitution. HARTING parts also offer higher current rating (6.5A) and extended temperature range (-55°C to 125°C).

Q: What is the difference between 09651626815 and 09651626816?

A: Both HARTING parts are functionally equivalent 9-position D-Sub plugs with identical electrical and mechanical specifications. The primary difference is packaging: 09651626815 is supplied in bulk packaging, while 09651626816 is supplied in bag packaging. Flange feature differs slightly: 09651626815 features M3 housing/shell flange, while 09651626816 features 4-40 housing/shell flange.

Q: Is the FCC17E09PC640 still available for purchase?

A: The FCC17E09PC640 is classified as obsolete. Current inventory of 1027 pieces is available, but long-term availability is not assured. For new designs and ongoing production, transition to active alternatives such as the FCE17 series or HARTING equivalents.

Q: What compliance certifications apply to substitute parts?

A: All FCE17 series variants are RoHS compliant. HARTING parts 09651626815 and 09651626816 are ROHS3 compliant and REACH unaffected. The original FCC17E09PC640 is RoHS non-compliant. For applications requiring RoHS compliance, FCE17 or HARTING alternatives are required.

Q: Can I use HARTING parts in applications requiring the original 200V voltage rating?

A: The provided specifications for HARTING parts do not include voltage rating data. Verify HARTING part voltage specifications with the manufacturer before substitution in applications with specific voltage requirements.

Q: What is the contact finish difference between FCC17E09PC640 and substitute parts?

A: The FCC17E09PC640 features gold-plated contacts (15.0µin / 0.38µm thickness) on phosphor bronze base material. FCE17 variants maintain identical gold plating and phosphor bronze contacts. HARTING parts do not specify contact finish in the provided data; contact the manufacturer for finish specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message