FCC17E09PC4D0 Equivalent & Substitute Parts

Part Overview

The FCC17E09PC4D0 is a 9-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This right-angle, through-hole solder connector features male pins, a DE/E shell size (Size 1), and is designed for signal applications with a 5A current rating and 200V voltage rating. The part is classified as obsolete, necessitating identification of active equivalent and substitute components for new designs and ongoing production support.

Key Parameters

Parameter	Value
Manufacturer Part Number	FCC17E09PC4D0
Manufacturer	Amphenol ICC (Commercial Products)
Connector Type	Plug, Male Pins
Number of Positions	9
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Product Status	Obsolete
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution of the FCC17E09PC4D0 is determined by strict alignment of the following critical parameters:

Primary Substitution Criteria:

Connector Type: Plug, Male Pins (9-position)
Shell Size, Connector Layout: 1 (DE, E)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Number of Positions: 9
Number of Rows: 2
Flange Feature: Housing/Shell (4-40)
Contact Type: Signal
Material Flammability Rating: UL94 V-0
Backset Spacing: 0.590" (14.99mm)
Contact Material: Phosphor Bronze
Dielectric Material: Thermoplastic

Secondary Compatibility Parameters:

Current Rating: 5A (minimum requirement)
Operating Temperature Range: -40°C ~ 85°C (minimum requirement)
Contact Finish: Gold
Contact Finish Thickness: 15.0µin (0.38µm)
Features: Board Lock, Filter, Grounding Indents

Substitute parts are grouped into two categories: Amphenol ICC FCE17 series (active status, RoHS compliant) and HARTING 09651626 series (active status, ROHS3 compliant). All substitutes maintain identical connector geometry, pin configuration, and electrical performance within the specified operating envelope.

Parameter Comparison

Parameter	FCC17E09PC4D0	FCE17E09PC4D0	FCE17E09PC400	FCE17E09PC410	FCE17E09PC440	FCE17E09PC450	FCE17E09PC480	FCE17E09PC490	FCE17E09PC4E0	09651626816
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING
Series	FCC17	FCE17	FCE17	FCE17	FCE17	FCE17	FCE17	FCE17	FCE17	—
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	9	9	9	9	9	9	9	9	9	9
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	—
Contact Finish Thickness	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	—
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Backset Spacing	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.409" (10.40mm)
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Amphenol ICC FCE17 Series (Primary Substitutes)

The FCE17E09PC4D0, FCE17E09PC400, FCE17E09PC410, FCE17E09PC440, FCE17E09PC450, FCE17E09PC480, FCE17E09PC490, and FCE17E09PC4E0 are direct functional equivalents of the obsolete FCC17E09PC4D0. All FCE17 variants maintain identical connector geometry, pin configuration, electrical ratings, and mechanical specifications. The primary distinction among FCE17 variants is the contact finish specification (indicated by the suffix code), which does not affect interchangeability for standard signal applications.

All FCE17 substitutes are active products with RoHS compliance status, addressing regulatory requirements for new designs. These parts are recommended as the primary replacement path for the FCC17E09PC4D0 due to manufacturer continuity, identical mechanical fit, and proven compatibility with existing PCB layouts and mating connectors.

HARTING 09651626816 (Secondary Substitute)

The HARTING 09651626816 provides functional equivalence with notable parameter variations. This connector maintains the 9-position D-Sub plug configuration, right-angle through-hole mounting, and solder termination. However, the backset spacing differs (0.409" versus 0.590"), and the contact material is copper alloy rather than phosphor bronze. The HARTING part offers enhanced current rating (6.5A versus 5A) and extended operating temperature range (-55°C to 125°C versus -40°C to 85°C).

The HARTING 09651626816 is suitable for applications requiring extended temperature performance or higher current capacity. ROHS3 compliance and active product status support new design adoption. PCB layout modification is required due to backset spacing difference.

Frequently Asked Questions (FAQ)

Q: Can FCE17E09PC4D0 directly replace FCC17E09PC4D0 without PCB modification?

A: Yes. The FCE17E09PC4D0 maintains identical mechanical dimensions, pin spacing (0.590" backset), shell size (DE/E, Size 1), and mounting configuration. No PCB layout changes are required. The connector will mate with existing receptacles designed for the FCC17E09PC4D0.

Q: What is the difference between FCE17E09PC4D0, FCE17E09PC400, FCE17E09PC410, FCE17E09PC440, FCE17E09PC450, FCE17E09PC480, FCE17E09PC490, and FCE17E09PC4E0?

A: All eight FCE17 variants are mechanically and electrically identical. The suffix code (4D0, 400, 410, 440, 450, 480, 490, 4E0) specifies the contact finish specification. For standard signal applications, all variants are interchangeable. Selection should be based on availability and specific contact finish requirements for your application.

Q: Why does the HARTING 09651626816 have different backset spacing?

A: The HARTING 09651626816 uses a different connector design standard with 0.409" backset spacing compared to the 0.590" spacing of the Amphenol FCC17/FCE17 series. This dimensional difference requires PCB layout modification and is not a direct drop-in replacement. Use HARTING 09651626816 only when extended temperature range or higher current capacity is required and PCB redesign is feasible.

Q: Is the FCC17E09PC4D0 still available?

A: The FCC17E09PC4D0 is classified as obsolete. Current inventory of 1,172 pieces is available, but long-term supply cannot be guaranteed. Migration to active FCE17 series substitutes is recommended for new designs and ongoing production support.

Q: Are all substitute parts RoHS compliant?

A: The Amphenol FCE17 series parts are RoHS compliant. The HARTING 09651626816 is ROHS3 compliant. The original FCC17E09PC4D0 is RoHS non-compliant. For applications requiring RoHS compliance, use FCE17 or HARTING substitutes.

Q: What is the current rating difference between FCC17E09PC4D0 and HARTING 09651626816?

A: The FCC17E09PC4D0 and all FCE17 variants are rated for 5A. The HARTING 09651626816 is rated for 6.5A. For applications requiring higher current capacity, the HARTING part provides additional margin. Verify that your application current requirements do not exceed 5A before selecting Amphenol parts.

Q: Can I use HARTING 09651626816 in a design originally specified for FCC17E09PC4D0?

A: Direct substitution is not recommended without design review. The HARTING part has different backset spacing (0.409" versus 0.590"), requiring PCB layout modification. Additionally, the contact material differs (copper alloy versus phosphor bronze). Use HARTING 09651626816 only when PCB redesign is acceptable and extended temperature performance is required.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message