Request Quote
(Ships tomorrow)
FCC17E09PC41B D-Sub 9-Position Right Angle Solder Plug Connector
Part Overview
The FCC17E09PC41B is a 9-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products) with right-angle through-hole solder termination. This connector is classified as obsolete, which necessitates identification of active equivalent and substitute parts for new designs and ongoing production support. The FCC17 series connector features a DE shell size (1 row configuration) with male pins, gold-plated contacts, and tin-plated steel shell construction suitable for signal applications up to 5A at 200V.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Manufacturer Part Number | FCC17E09PC41B |
| Manufacturer | Amphenol ICC (Commercial Products) |
| Connector Type | D-Sub Plug, Male Pins |
| Number of Positions | 9 |
| Shell Size / Layout | 1 (DE, E) |
| Mounting Type | Through Hole, Right Angle |
| Termination | Solder |
| Current Rating | 5A |
| Voltage Rating | 200V |
| Operating Temperature Range | -40°C to 85°C |
| Shell Material / Finish | Steel, Tin Plated |
| Contact Finish | Gold (15.0µin / 0.38µm) |
| Contact Material | Phosphor Bronze |
| Flange Feature | Board Side (4-40) |
| Product Status | Obsolete |
| RoHS Status | RoHS Non-Compliant |
Substitute Part Grouping Explanation
Substitution of the FCC17E09PC41B is determined by strict equivalence across the following critical parameters:
Primary Substitution Criteria:
- Connector type: D-Sub plug with male pins
- Number of positions: 9
- Shell size and layout: 1 (DE, E)
- Mounting configuration: Through hole, right angle
- Termination method: Solder
- Current rating: 5A minimum
- Operating temperature range: -40°C to 85°C minimum
- Flange feature: Board side mounting with 4-40 fasteners
- Contact material and finish: Gold-plated contacts
Substitute Categories:
Category 1: Direct Series Upgrade (Amphenol ICC FCE17 Series) The FCE17E09PC41B, FCE17E09PC40B, FCE17E09PC44B, FCE17E09PC45B, FCE17E09PC48B, FCE17E09PC49B, FCE17E09PC4DB, and FCE17E09PC4EB represent active production equivalents within the Amphenol ICC product line. These parts maintain identical mechanical and electrical specifications to the FCC17E09PC41B while offering RoHS compliance and active product status. The FCE17 series shares the same base product architecture (FCE17E09) with variations in contact finish specifications denoted by the suffix codes (PC40B through PC4EB).
Category 2: Cross-Manufacturer Alternatives (HARTING) The HARTING 09651626815 and 09651626816 connectors provide functional equivalence with notable parameter variations. These parts maintain the 9-position D-Sub plug configuration with right-angle solder termination and board-side flange mounting. However, they differ in backset spacing (0.409" vs. 0.590"), current rating (6.5A vs. 5A), operating temperature range (-55°C to 125°C vs. -40°C to 85°C), contact material (copper alloy vs. phosphor bronze), and contact form (stamped vs. machined). These differences require design validation before substitution.
Parameter Comparison
| Parameter | FCC17E09PC41B | FCE17E09PC41B | FCE17E09PC40B | FCE17E09PC44B | FCE17E09PC45B | FCE17E09PC48B | FCE17E09PC49B | FCE17E09PC4DB | FCE17E09PC4EB | 09651626815 | 09651626816 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | HARTING | HARTING |
| Connector Type | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male |
| Positions | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 |
| Shell Size | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) |
| Mounting Type | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle |
| Termination | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder |
| Current Rating (A) | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 6.5 | 6.5 |
| Voltage Rating (V) | 200 | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified |
| Operating Temperature (°C) | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 | -55 to 125 | -55 to 125 |
| Shell Material | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel | Steel |
| Contact Finish | Gold | Gold | Gold | Gold | Gold | Gold | Gold | Gold | Gold | Not Specified | Not Specified |
| Contact Material | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Copper Alloy | Copper Alloy |
| Backset Spacing (inches) | 0.590 | 0.590 | 0.590 | 0.590 | 0.590 | 0.590 | 0.590 | 0.590 | 0.590 | 0.409 | 0.409 |
| Flange Feature | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Housing/Shell (M3) | Housing/Shell (4-40) |
| RoHS Status | Non-Compliant | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant | ROHS3 Compliant | ROHS3 Compliant |
| Product Status | Obsolete | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active |
Engineering Selection Recommendations
Amphenol ICC FCE17 Series (FCE17E09PC41B, FCE17E09PC40B, FCE17E09PC44B, FCE17E09PC45B, FCE17E09PC48B, FCE17E09PC49B, FCE17E09PC4DB, FCE17E09PC4EB)
The FCE17 series represents the primary substitution path for the obsolete FCC17E09PC41B. All eight variants maintain identical mechanical and electrical specifications while offering active product status and RoHS compliance. These parts are manufactured by the same supplier (Amphenol ICC) and share the same base product number (FCE17E09), with suffix variations indicating contact finish specifications. Selection among these variants should be based on specific contact finish requirements for your application. All FCE17 variants are suitable for direct replacement in new designs and production continuations.
HARTING 09651626815 and 09651626816
The HARTING alternatives provide functional D-Sub 9-position plug connectors with right-angle solder termination and active product status. These parts are suitable for applications where the following parameter variations are acceptable:
- Backset spacing of 0.409" (10.40mm) instead of 0.590" (14.99mm) requires PCB layout verification
- Current rating of 6.5A exceeds the 5A requirement, providing design margin
- Extended operating temperature range (-55°C to 125°C) accommodates wider environmental conditions
- Copper alloy contacts instead of phosphor bronze require electrical performance validation
- Stamped contact form instead of machined contacts may affect contact resistance characteristics
The HARTING 09651626816 with 4-40 board-side flange mounting is more compatible with the original FCC17E09PC41B mounting configuration than the 09651626815 variant, which uses M3 housing-shell mounting.
Frequently Asked Questions (FAQ)
Q1: Can I directly replace FCC17E09PC41B with FCE17E09PC41B without design changes?
A: Yes. The FCE17E09PC41B is a direct equivalent to the FCC17E09PC41B. Both connectors share identical mechanical dimensions, electrical ratings, mounting configuration, and contact specifications. The primary difference is product status (active vs. obsolete) and RoHS compliance. No PCB layout or circuit modifications are required.
Q2: What is the difference between the various FCE17E09PC variants (PC40B, PC44B, PC45B, PC48B, PC49B, PC4DB, PC4EB)?
A: All FCE17E09PC variants maintain identical mechanical and electrical specifications. The suffix codes (PC40B through PC4EB) denote variations in contact finish specifications. Without detailed contact finish specifications provided in the data, selection should be based on your application's contact resistance, corrosion resistance, and signal integrity requirements. Consult Amphenol ICC technical documentation for specific finish characteristics of each variant.
Q3: Can I use HARTING 09651626815 or 09651626816 as a direct replacement?
A: These HARTING connectors provide functional equivalence but with parameter variations that require design validation. The most significant difference is backset spacing (0.409" vs. 0.590"), which affects PCB mounting hole positioning. The 09651626816 is more compatible due to its 4-40 board-side flange mounting, matching the original connector's mounting interface. However, PCB layout verification is mandatory before substitution.
Q4: What does RoHS compliance mean for connector selection?
A: RoHS (Restriction of Hazardous Substances) compliance indicates the connector meets EU environmental regulations restricting lead, cadmium, mercury, and other hazardous materials. The FCC17E09PC41B is RoHS non-compliant, while all FCE17 variants and HARTING alternatives are RoHS compliant. For new designs or products destined for EU markets, RoHS-compliant alternatives are required.
Q5: Are there any inventory considerations for these substitute parts?
A: Current inventory levels are: FCC17E09PC41B (1,059 pcs), FCE17E09PC41B (661 pcs), FCE17E09PC40B (950 pcs), FCE17E09PC44B (854 pcs), FCE17E09PC45B (783 pcs), FCE17E09PC48B (967 pcs), FCE17E09PC49B (912 pcs), FCE17E09PC4DB (1,023 pcs), FCE17E09PC4EB (975 pcs), HARTING 09651626815 (829 pcs), and HARTING 09651626816 (911 pcs). For long-term production planning, the FCE17 series offers superior availability and active product status.
Q6: What is the significance of contact material differences (phosphor bronze vs. copper alloy)?
A: Phosphor bronze (FCC17/FCE17 series) and copper alloy (HARTING) are both suitable for signal-level D-Sub connectors. Phosphor bronze offers superior spring properties and contact durability. Copper alloy provides adequate performance for standard applications. Contact resistance and mating cycle life may differ between materials. Electrical performance validation is recommended before substituting between these contact materials.
Q7: How do operating temperature ranges affect connector selection?
A: The FCC17E09PC41B and FCE17 series operate from -40°C to 85°C, suitable for commercial and industrial applications. HARTING alternatives extend this range to -55°C to 125°C, accommodating military and extreme environment applications. If your application operates within the -40°C to 85°C range, all substitutes are suitable. Extended temperature requirements favor HARTING alternatives.
Q8: What is the significance of the 0.590" vs. 0.409" backset spacing difference?
A: Backset spacing defines the distance from the connector's mounting flange to the rear of the connector body. This dimension directly affects PCB layout and component placement. A difference of 0.181" (4.59mm) is significant and requires PCB redesign if substituting HARTING connectors. Direct replacement within the Amphenol ICC product line (FCC17 to FCE17) maintains identical backset spacing and requires no layout changes.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts