FCC17E09PC2E0 Equivalent & Substitute Parts Reference

Part Overview

The FCC17E09PC2E0 is a 9-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This right-angle, through-hole solder termination connector features male pins, a 1 (DE, E) shell size, and is designed for signal applications with a 5A current rating and 200V voltage rating. The part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement continuity.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Material Flammability Rating	UL94 V-0
Backset Spacing	0.590" (14.99mm)
Features	Board Lock, Filter, Grounding Indents
Contact Material	Phosphor Bronze
Dielectric Material	Thermoplastic
RoHS Status	RoHS non-compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution for the FCC17E09PC2E0 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Connector Style: D-Sub
Connector Type: Plug, Male Pins
Number of Positions: 9
Number of Rows: 2
Shell Size, Connector Layout: 1 (DE, E)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Current Rating: 5A minimum
Operating Temperature Range: -40°C ~ 85°C minimum
Material Flammability Rating: UL94 V-0

Substitute Categories:

Category 1: Amphenol ICC Active Series (FCE17 Series) The FCE17E09PC2E0, FCE17E09PC200, FCE17E09PC210, FCE17E09PC240, FCE17E09PC250, FCE17E09PC280, FCE17E09PC290, and FCE17E09PC2D0 are direct parametric equivalents from Amphenol ICC. These parts maintain identical mechanical and electrical specifications to the FCC17E09PC2E0 while offering active product status. The primary distinction is RoHS compliance status: FCE17 series parts are RoHS Compliant, whereas the FCC17E09PC2E0 is RoHS non-compliant. The dielectric material in FCE17 variants includes glass-filled thermoplastic formulations.

Category 2: HARTING Cross-Manufacturer Equivalents The HARTING parts 09651626815 and 09651626816 provide functional equivalence with notable parameter variations. These connectors maintain the 9-position D-Sub plug configuration with right-angle through-hole mounting and solder termination. However, they differ in backset spacing (0.409" vs. 0.590"), current rating (6.5A vs. 5A), operating temperature range (-55°C ~ 125°C vs. -40°C ~ 85°C), contact material (Copper Alloy vs. Phosphor Bronze), and flange feature design (M3 or 4-40 vs. unthreaded housing).

Parameter Comparison

Parameter	FCC17E09PC2E0	FCE17E09PC2E0	FCE17E09PC200	FCE17E09PC210	FCE17E09PC240	FCE17E09PC250	FCE17E09PC280	FCE17E09PC290	FCE17E09PC2D0	09651626815	09651626816
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Shell Size	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Material Flammability	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Backset Spacing	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.409" (10.40mm)	0.409" (10.40mm)
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

Primary Recommendation: Amphenol ICC FCE17 Series

For applications requiring direct mechanical and electrical compatibility with minimal design modification, the Amphenol ICC FCE17E09PC2E0, FCE17E09PC200, FCE17E09PC210, FCE17E09PC240, FCE17E09PC250, FCE17E09PC280, FCE17E09PC290, and FCE17E09PC2D0 connectors are preferred substitutes. These parts maintain identical form factor, pin configuration, current rating, voltage rating, and operating temperature specifications. All FCE17 variants are active products with RoHS compliance, providing long-term supply assurance and regulatory alignment. The transition from the obsolete FCC17E09PC2E0 to any FCE17 variant requires no circuit board redesign or mechanical accommodation changes.

Secondary Recommendation: HARTING 09651626815 and 09651626816

The HARTING D-Sub plug connectors 09651626815 and 09651626816 provide functional equivalence for applications where parameter variations are acceptable. These parts maintain the 9-position D-Sub plug configuration, right-angle through-hole mounting, and solder termination. However, design integration requires evaluation of the following differences: reduced backset spacing (0.409" vs. 0.590"), higher current rating (6.5A vs. 5A), extended operating temperature range (-55°C ~ 125°C vs. -40°C ~ 85°C), and alternative contact material (Copper Alloy vs. Phosphor Bronze). HARTING parts are ROHS3 compliant and active products. These connectors are suitable for applications with more demanding thermal or current requirements than the original specification.

Compliance Considerations

The FCC17E09PC2E0 is RoHS non-compliant. All recommended Amphenol ICC FCE17 substitutes are RoHS Compliant, and HARTING parts are ROHS3 Compliant. For new designs or applications subject to RoHS regulations, FCE17 series selection is mandatory. For legacy system maintenance where RoHS compliance is not required, the FCC17E09PC2E0 remains available in inventory (747 pcs).

Frequently Asked Questions (FAQ)

Q: Can FCE17E09PC2E0 replace FCC17E09PC2E0 directly without board modification?

A: Yes. The FCE17E09PC2E0 maintains identical mechanical dimensions, pin configuration, mounting type (through-hole right angle), and electrical ratings (5A, 200V, -40°C ~ 85°C). No printed circuit board redesign is required. The primary difference is RoHS compliance status and active product availability.

Q: What is the difference between the multiple FCE17 part numbers (PC200, PC210, PC240, PC250, PC280, PC290, PC2D0)?

A: All FCE17 variants listed share identical electrical and mechanical specifications. The suffix designations (PC200, PC210, PC240, PC250, PC280, PC290, PC2D0) represent internal Amphenol ICC configuration codes that do not affect connector performance or compatibility. Selection among these variants may be based on inventory availability or internal procurement specifications.

Q: Are HARTING 09651626815 and 09651626816 pin-compatible with FCC17E09PC2E0?

A: Both connectors are 9-position D-Sub plugs with male pins and maintain the 1 (DE, E) shell size. However, the backset spacing differs (0.409" vs. 0.590"), which affects printed circuit board layout. Direct board-level substitution without layout modification is not possible. These HARTING parts are suitable for new designs or applications where backset spacing adjustment is feasible.

Q: What is the significance of backset spacing in D-Sub connector selection?

A: Backset spacing defines the distance from the connector mounting face to the rear of the connector body. The FCC17E09PC2E0 specifies 0.590" (14.99mm), while HARTING alternatives specify 0.409" (10.40mm). This parameter directly affects printed circuit board layout, component placement, and enclosure design. Mismatched backset spacing requires board redesign and may affect mechanical fit within the system.

Q: Can I use HARTING connectors in applications requiring the full -40°C ~ 85°C operating range?

A: Yes. HARTING parts 09651626815 and 09651626816 support an extended operating temperature range of -55°C ~ 125°C, which encompasses the original -40°C ~ 85°C specification. These connectors are suitable for applications within the original temperature range and for applications requiring extended thermal performance.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant status?

A: RoHS Compliant indicates compliance with the original Restriction of Hazardous Substances Directive. ROHS3 Compliant indicates compliance with RoHS 3 (Directive 2015/863/EU), which includes additional restricted substances. Both compliance levels are acceptable for new designs; ROHS3 represents the current regulatory standard.

Q: Are there inventory considerations when selecting substitute parts?

A: Yes. Current inventory levels are: FCC17E09PC2E0 (747 pcs), FCE17E09PC2E0 (756 pcs), FCE17E09PC200 (779 pcs), FCE17E09PC210 (960 pcs), FCE17E09PC240 (1009 pcs), FCE17E09PC250 (748 pcs), FCE17E09PC280 (1047 pcs), FCE17E09PC290 (922 pcs), FCE17E09PC2D0 (982 pcs), 09651626815 (829 pcs), and 09651626816 (911 pcs). For high-volume procurement, FCE17E09PC240 and FCE17E09PC280 offer the highest available stock levels.

Q: What contact material differences exist between substitute options?

A: The FCC17E09PC2E0 and all Amphenol ICC FCE17 variants use Phosphor Bronze contacts with gold plating (15.0µin / 0.38µm thickness). HARTING parts 09651626815 and 09651626816 use Copper Alloy contacts without specified plating thickness. Phosphor Bronze provides superior corrosion resistance and contact reliability in signal applications. For applications requiring maximum contact durability, Amphenol ICC FCE17 variants are preferred.

Q: Can I mix FCC17E09PC2E0 and FCE17 series connectors in the same system?

A: Mechanical and electrical compatibility exists between FCC17E09PC2E0 and FCE17 series connectors. However, mixing obsolete and active product lines in the same system is not recommended for long-term supply chain management. Standardization on a single active product line (FCE17 series) ensures consistent availability and regulatory compliance across the product lifecycle.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message