FCC17E09PC2DB D-Sub Connector Equivalent & Substitute Parts

Part Overview

The FCC17E09PC2DB is a 9-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products) with right-angle solder termination. This connector is classified as obsolete, necessitating identification of active equivalent and substitute parts for ongoing design and procurement requirements. The part features male pins, through-hole mounting, and is designed for signal applications with a 5A current rating and 200V voltage rating.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Current Rating (Amps)	5A
Voltage Rating	200V
Backset Spacing	0.590" (14.99mm)
Operating Temperature	-40°C ~ 85°C
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS non-compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the FCC17E09PC2DB is determined by strict equivalence across the following critical parameters:

Primary Equivalence Criteria:

Connector style (D-Sub)
Connector type (Plug, Male Pins)
Number of positions (9)
Number of rows (2)
Shell size and connector layout (1 / DE, E)
Mounting type (Through Hole, Right Angle)
Termination method (Solder)
Contact type (Signal)
Flange feature (Housing/Shell)
Material flammability rating (UL94 V-0)
Current rating (5A minimum)
Backset spacing (0.590" / 14.99mm)
Operating temperature range (-40°C ~ 85°C minimum)
Moisture sensitivity level (1 / Unlimited)

Secondary Compatibility Parameters:

Shell material and finish (Steel, Tin Plated)
Contact finish (Gold)
Contact material (Phosphor Bronze or equivalent)
Dielectric material composition

Substitute parts are grouped into two categories: Amphenol ICC FCE17 series active equivalents and alternative manufacturer options. The FCE17 series represents direct functional equivalents with improved RoHS compliance status. Alternative manufacturer parts meet core electrical and mechanical parameters but may exhibit variations in contact form, dielectric material composition, backset spacing, and current rating specifications.

Parameter Comparison

Parameter	FCC17E09PC2DB	FCE17E09PC2DB	FCE17E09PC20B	FCE17E09PC21B	FCE17E09PC24B	FCE17E09PC25B	FCE17E09PC28B	FCE17E09PC29B	FCE17E09PC2EB	09651626815	09651626816
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not specified	Not specified
Contact Finish Thickness	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	Not specified	Not specified
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Backset Spacing	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.409" (10.40mm)	0.409" (10.40mm)
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Primary Recommendation: Amphenol ICC FCE17 Series

The FCE17E09PC2DB, FCE17E09PC20B, FCE17E09PC21B, FCE17E09PC24B, FCE17E09PC25B, FCE17E09PC28B, FCE17E09PC29B, and FCE17E09PC2EB represent the optimal substitutes for the obsolete FCC17E09PC2DB. These parts maintain identical electrical and mechanical specifications while offering active product status and RoHS compliance. All FCE17 variants share the same core parameters: 9-position D-Sub plug configuration, right-angle through-hole solder termination, 5A current rating, steel tin-plated shell with gold-plated contacts, and -40°C to 85°C operating temperature range. The FCE17 series variants differ only in internal contact configuration or packaging specifications, which do not affect functional compatibility with the original FCC17E09PC2DB design.

Secondary Recommendation: HARTING 09651626815 and 09651626816

The HARTING 09651626815 and 09651626816 connectors provide functional alternatives for applications where extended operating temperature range (-55°C to 125°C) and higher current capacity (6.5A) are beneficial. These parts maintain the 9-position D-Sub plug configuration, right-angle through-hole solder termination, and UL94 V-0 flammability rating. However, these HARTING parts exhibit the following parameter variations: backset spacing of 0.409" (10.40mm) versus the original 0.590" (14.99mm), stamped contact form versus machined, and copper alloy contact material versus phosphor bronze. These differences may require PCB layout verification and mechanical fit assessment before implementation.

Compliance Considerations

For applications requiring RoHS compliance, the FCE17 series (RoHS Compliant) and HARTING parts (ROHS3 Compliant) are suitable replacements for the non-compliant FCC17E09PC2DB. All substitute options maintain UL94 V-0 flammability certification and MSL 1 moisture sensitivity rating.

Frequently Asked Questions (FAQ)

Q: Can FCE17E09PC2DB be used as a direct replacement for FCC17E09PC2DB?

A: Yes. The FCE17E09PC2DB maintains identical electrical and mechanical specifications including connector type, position count, shell size, mounting configuration, termination method, current rating, voltage rating, and operating temperature range. The primary difference is active product status and RoHS compliance.

Q: What distinguishes the various FCE17 part numbers (PC20B, PC21B, PC24B, PC25B, PC28B, PC29B, PC2EB)?

A: The FCE17 variants differ in internal contact configuration or packaging specifications. All variants maintain identical external mechanical dimensions, electrical ratings, and functional compatibility. Selection among FCE17 variants depends on specific internal contact requirements for your application.

Q: Are HARTING 09651626815 and 09651626816 fully compatible with FCC17E09PC2DB?

A: HARTING parts meet core D-Sub 9-position plug requirements and maintain UL94 V-0 certification. However, backset spacing differs (0.409" versus 0.590"), which may affect PCB layout compatibility. Contact form (stamped versus machined) and contact material (copper alloy versus phosphor bronze) also differ. Mechanical fit and electrical performance must be verified for your specific application before implementation.

Q: What is the significance of backset spacing differences?

A: Backset spacing determines the distance from the connector mounting surface to the contact plane. The original FCC17E09PC2DB specifies 0.590" (14.99mm), while HARTING alternatives specify 0.409" (10.40mm). This difference affects PCB layout, mating connector alignment, and overall assembly geometry. Designs utilizing the original spacing cannot accommodate HARTING parts without PCB modification.

Q: Do all substitute parts support the same current and voltage ratings?

A: FCE17 series parts maintain the original 5A current and 200V voltage ratings. HARTING parts support 6.5A current rating, which exceeds the original specification. Voltage rating is not specified for HARTING parts. For applications requiring exact specification matching, FCE17 series is recommended.

Q: What is the operating temperature range difference between substitutes?

A: The original FCC17E09PC2DB and all FCE17 variants operate from -40°C to 85°C. HARTING parts extend this range to -55°C to 125°C, providing enhanced performance in extreme temperature environments. For standard industrial applications within -40°C to 85°C, all options are functionally equivalent.

Q: Are there packaging differences among the substitute options?

A: FCE17E09PC29B is packaged in boxes, while most other FCE17 variants do not specify packaging. HARTING 09651626815 is supplied in bulk packaging, and 09651626816 is supplied in bag packaging. Packaging differences do not affect connector functionality but may impact inventory management and handling procedures.

Q: What RoHS compliance status applies to each substitute?

A: All FCE17 series parts are RoHS Compliant. HARTING parts are ROHS3 Compliant. The original FCC17E09PC2DB is RoHS non-compliant. For applications subject to RoHS regulations, FCE17 or HARTING substitutes are required.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message