FCC17E09PC28B Equivalent & Substitute Parts

Part Overview

The FCC17E09PC28B is a 9-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This right-angle, through-hole solder termination connector features male pins with a 2-row configuration in shell size 1 (DE, E). The part is classified as obsolete, necessitating identification of active equivalent alternatives for new designs and ongoing production requirements. Substitute parts maintain functional compatibility while offering improved product status and compliance certifications.

Key Parameters

Parameter	FCC17E09PC28B
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Material Flammability Rating	UL94 V-0
Contact Material	Phosphor Bronze
Backset Spacing	0.590" (14.99mm)
Product Status	Obsolete
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitute parts for the FCC17E09PC28B are grouped into two categories based on substitution compatibility:

Category 1: Direct Series Equivalents (Amphenol ICC FCE17 Series)

The FCE17E09PC28B, FCE17E09PC20B, FCE17E09PC21B, FCE17E09PC24B, FCE17E09PC25B, FCE17E09PC29B, FCE17E09PC2DB, and FCE17E09PC2EB are parametric equivalents within the Amphenol ICC product line. These parts maintain identical specifications across the following critical parameters:

Connector style, type, and pin configuration (9-position D-Sub plug, male pins)
Shell size and layout (1 DE, E)
Mounting configuration (through hole, right angle)
Termination method (solder)
Shell material and finish (steel, tin plated)
Contact finish and thickness (gold, 15.0µin)
Current rating (5A)
Material flammability (UL94 V-0)
Contact material (phosphor bronze)
Backset spacing (0.590" / 14.99mm)
Operating temperature range (-40°C ~ 85°C)
Moisture sensitivity level (MSL 1)

The primary distinction is product status: all FCE17 variants are active, whereas the FCC17E09PC28B is obsolete. Additionally, FCE17 variants are RoHS compliant, addressing regulatory requirements not met by the original part.

Category 2: Cross-Manufacturer Alternative (HARTING 09651626815 and 09651626816)

The HARTING 09651626815 and 09651626816 connectors provide functional alternatives with the following shared parameters:

Connector style and type (D-Sub plug, male pins)
Pin configuration (9-position, 2-row)
Shell size and layout (1 DE, E)
Mounting configuration (through hole, right angle)
Termination method (solder)
Material flammability (UL94 V-0)
Moisture sensitivity level (MSL 1)

These HARTING parts differ in backset spacing (0.409" / 10.40mm versus 0.590" / 14.99mm), current rating (6.5A versus 5A), contact material (copper alloy versus phosphor bronze), and operating temperature range (-55°C ~ 125°C versus -40°C ~ 85°C). These differences require mechanical and electrical validation before substitution.

Parameter Comparison

Parameter	FCC17E09PC28B	FCE17E09PC28B	FCE17E09PC20B	FCE17E09PC21B	FCE17E09PC24B	FCE17E09PC25B	FCE17E09PC29B	FCE17E09PC2DB	FCE17E09PC2EB	09651626815	09651626816
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not Specified	Not Specified
Contact Finish Thickness	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	Not Specified	Not Specified
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Backset Spacing	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.409" (10.40mm)	0.409" (10.40mm)
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Primary Recommendation: Amphenol ICC FCE17 Series

The FCE17E09PC28B, FCE17E09PC20B, FCE17E09PC21B, FCE17E09PC24B, FCE17E09PC25B, FCE17E09PC29B, FCE17E09PC2DB, and FCE17E09PC2EB are the preferred substitutes for the obsolete FCC17E09PC28B. These parts are functionally identical across all critical electrical and mechanical parameters. The FCE17 series offers the following advantages:

Active product status with ongoing manufacturer support
RoHS compliance, meeting current regulatory requirements
Identical connector configuration, pin count, and shell size
Matching electrical ratings (5A current, 200V voltage capability)
Identical operating temperature range (-40°C ~ 85°C)
Equivalent contact materials and finishes
Direct mechanical compatibility with existing PCB layouts and mating connectors

Selection among FCE17 variants depends on packaging requirements and inventory availability. All variants maintain identical electrical and mechanical specifications.

Secondary Recommendation: HARTING 09651626815 and 09651626816

The HARTING 09651626815 and 09651626816 connectors provide functional alternatives for applications where the following parameter differences are acceptable:

Reduced backset spacing (0.409" versus 0.590") requires PCB layout modification
Increased current rating (6.5A versus 5A) provides additional capacity
Extended operating temperature range (-55°C ~ 125°C versus -40°C ~ 85°C) supports wider environmental conditions
Copper alloy contact material differs from phosphor bronze

These HARTING parts are suitable for new designs where mechanical constraints permit the reduced backset spacing and where the extended temperature range provides system benefits. Existing designs using the FCC17E09PC28B require mechanical validation before HARTING substitution.

Frequently Asked Questions (FAQ)

Q: Can the FCE17E09PC28B directly replace the FCC17E09PC28B in existing designs?

A: Yes. The FCE17E09PC28B maintains identical electrical and mechanical specifications across all critical parameters, including connector type, pin configuration, shell size, mounting style, current rating, voltage rating, and operating temperature range. Direct substitution is supported without design modification.

Q: What is the primary advantage of FCE17 series substitutes over the original FCC17E09PC28B?

A: The FCE17 series parts are active products with RoHS compliance certification. The original FCC17E09PC28B is obsolete and RoHS non-compliant. For new production and designs subject to RoHS regulations, FCE17 variants are required.

Q: Are all FCE17 variants electrically and mechanically identical?

A: Yes. All FCE17 variants (FCE17E09PC28B, FCE17E09PC20B, FCE17E09PC21B, FCE17E09PC24B, FCE17E09PC25B, FCE17E09PC29B, FCE17E09PC2DB, FCE17E09PC2EB) share identical electrical ratings, mechanical dimensions, and connector specifications. Differences exist only in packaging format and inventory availability.

Q: Can HARTING 09651626815 or 09651626816 replace the FCC17E09PC28B?

A: HARTING parts provide functional alternatives with the same connector style, pin count, and shell size. However, they differ in backset spacing (0.409" versus 0.590"), current rating (6.5A versus 5A), contact material (copper alloy versus phosphor bronze), and operating temperature range (-55°C ~ 125°C versus -40°C ~ 85°C). Substitution requires mechanical validation and confirmation that these parameter differences are acceptable for the application.

Q: What is backset spacing and why does it matter for substitution?

A: Backset spacing is the distance from the rear of the connector shell to the solder cup termination points. The FCC17E09PC28B has 0.590" (14.99mm) backset spacing, while HARTING alternatives have 0.409" (10.40mm). Different backset spacing requires different PCB hole patterns and component placement. Existing PCB designs cannot accommodate HARTING connectors without layout modification.

Q: Are there packaging differences among the FCE17 variants?

A: Yes. FCE17E09PC29B is packaged in a box, while other FCE17 variants use standard packaging. All variants are functionally identical; packaging selection depends on inventory management and distribution requirements.

Q: What does RoHS compliance mean for this connector?

A: RoHS (Restriction of Hazardous Substances) compliance indicates the part meets European Union regulations restricting the use of specific hazardous materials including lead, cadmium, and mercury. FCE17 series parts are RoHS compliant; the original FCC17E09PC28B is not. RoHS compliance is required for products sold in regulated markets.

Q: Can I mix FCC17E09PC28B and FCE17 variants in the same production run?

A: No. For consistency and regulatory compliance, use only FCE17 variants in new production. The FCC17E09PC28B is obsolete and should not be used in new designs or ongoing production requiring RoHS compliance.

Q: What is the difference between ROHS3 and RoHS compliance?

A: ROHS3 refers to the third iteration of RoHS regulations, which includes additional restricted substances beyond the original RoHS directive. HARTING parts are ROHS3 compliant, indicating compliance with the most current regulatory requirements. Both RoHS and ROHS3 compliant parts meet current regulatory standards.

Q: How do I select between multiple FCE17 variants?

A: All FCE17 variants are electrically and mechanically identical. Selection should be based on packaging preference, inventory availability, and lead time. Consult inventory levels and packaging specifications to determine the most suitable variant for your procurement requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message