Request Quote
(Ships tomorrow)
FCC17E09PB280 D-Sub Connector Equivalent & Substitute Parts
Part Overview
The FCC17E09PB280 is a 9-position D-Sub plug connector with right-angle solder termination manufactured by Amphenol ICC. This connector features male pins, through-hole mounting, and is designed for signal applications with a 5A current rating and 200V voltage rating. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for new designs and production continuity.
Substiute Parts
Key Parameters
| Parameter | FCC17E09PB280 |
|---|---|
| Connector Type | D-Sub Plug, Male Pins |
| Number of Positions | 9 |
| Shell Size | 1 (DE, E) |
| Mounting Type | Through Hole, Right Angle |
| Termination | Solder |
| Current Rating | 5A |
| Voltage Rating | 200V |
| Operating Temperature | -40°C ~ 85°C |
| Shell Material | Steel, Tin Plated |
| Contact Finish | Gold (15.0µin / 0.38µm) |
| Backset Spacing | 0.405" (10.29mm) |
| Flange Feature | Housing/Shell (Unthreaded) |
| Features | Board Lock, Filter, Grounding Indents |
| Material Flammability | UL94 V-0 |
| RoHS Status | Non-compliant |
Substitute Part Grouping Explanation
Substitution of the FCC17E09PB280 is determined by strict adherence to the following critical parameters:
Electrical Compatibility Parameters:
- Connector type: D-Sub plug with male pins
- Number of positions: 9
- Shell size: 1 (DE, E)
- Current rating: 5A minimum
- Voltage rating: 200V minimum
- Contact finish: Gold plating
Mechanical Compatibility Parameters:
- Mounting type: Through hole, right angle
- Termination method: Solder
- Backset spacing: 0.405" (10.29mm)
- Flange feature: Housing/Shell configuration
- Shell material: Steel with tin plating
- Operating temperature range: -40°C to 85°C minimum
Compliance Parameters:
- Material flammability: UL94 V-0
- Moisture sensitivity level: 1 (Unlimited)
Substitute parts are grouped into two categories: Amphenol ICC FCE17 series variants (active status, RoHS compliant) and HARTING alternatives (active status, ROHS3 compliant). All substitutes maintain identical electrical and mechanical specifications within the allowed parameter ranges.
Parameter Comparison
| Part Number | Manufacturer | Series | Status | Positions | Shell Size | Mounting | Current (A) | Voltage (V) | Temp Range (°C) | RoHS | Inventory |
|---|---|---|---|---|---|---|---|---|---|---|---|
| FCC17E09PB280 | Amphenol ICC | FCC17 | Obsolete | 9 | 1 (DE, E) | Through Hole, R/A | 5 | 200 | -40 ~ 85 | Non-compliant | 847 |
| FCE17E09PB280 | Amphenol ICC | FCE17 | Active | 9 | 1 (DE, E) | Through Hole, R/A | 5 | — | -40 ~ 85 | Compliant | 769 |
| FCE17E09PB200 | Amphenol ICC | FCE17 | Active | 9 | 1 (DE, E) | Through Hole, R/A | 5 | — | -40 ~ 85 | Compliant | 764 |
| FCE17E09PB210 | Amphenol ICC | FCE17 | Active | 9 | 1 (DE, E) | Through Hole, R/A | 5 | — | -40 ~ 85 | Compliant | 907 |
| FCE17E09PB240 | Amphenol ICC | FCE17 | Active | 9 | 1 (DE, E) | Through Hole, R/A | 5 | — | -40 ~ 85 | Compliant | 875 |
| FCE17E09PB250 | Amphenol ICC | FCE17 | Active | 9 | 1 (DE, E) | Through Hole, R/A | 5 | — | -40 ~ 85 | Compliant | 1075 |
| FCE17E09PB290 | Amphenol ICC | FCE17 | Active | 9 | 1 (DE, E) | Through Hole, R/A | 5 | — | -40 ~ 85 | Compliant | 970 |
| FCE17E09PB2D0 | Amphenol ICC | FCE17 | Active | 9 | 1 (DE, E) | Through Hole, R/A | 5 | — | -40 ~ 85 | Compliant | 716 |
| FCE17E09PB2E0 | Amphenol ICC | FCE17 | Active | 9 | 1 (DE, E) | Through Hole, R/A | 5 | — | -40 ~ 85 | Compliant | 745 |
| 09651626815 | HARTING | — | Active | 9 | 1 (DE, E) | Through Hole, R/A | 6.5 | — | -55 ~ 125 | ROHS3 Compliant | 829 |
| 09651626816 | HARTING | — | Active | 9 | 1 (DE, E) | Through Hole, R/A | 6.5 | — | -55 ~ 125 | ROHS3 Compliant | 911 |
Engineering Selection Recommendations
Primary Substitutes (Amphenol ICC FCE17 Series):
The FCE17E09PB280, FCE17E09PB200, FCE17E09PB210, FCE17E09PB240, FCE17E09PB250, FCE17E09PB290, FCE17E09PB2D0, and FCE17E09PB2E0 are direct functional equivalents to the obsolete FCC17E09PB280. All FCE17 variants maintain identical electrical and mechanical specifications: 9-position D-Sub plug configuration, 5A current rating, through-hole right-angle solder termination, and -40°C to 85°C operating temperature range. The primary distinction is product status: all FCE17 variants are active and RoHS compliant, whereas the FCC17E09PB280 is obsolete and non-compliant. These parts are suitable for new designs requiring regulatory compliance and long-term supply assurance.
Secondary Substitutes (HARTING 09651626815 and 09651626816):
The HARTING 09651626815 and 09651626816 connectors provide functional equivalence with enhanced electrical performance. Both parts maintain the 9-position D-Sub plug configuration, through-hole right-angle solder termination, and shell size 1 (DE, E) specification. The HARTING alternatives offer a higher current rating of 6.5A compared to the 5A rating of the FCC17E09PB280, and an extended operating temperature range of -55°C to 125°C. Both HARTING parts are active and ROHS3 compliant. The primary mechanical difference is the flange feature: HARTING 09651626815 features M3 housing/shell configuration, while 09651626816 features 4-40 housing/shell configuration, compared to the unthreaded housing/shell of the original part. Contact material differs (copper alloy versus phosphor bronze), and contact form is stamped rather than machined.
Compliance Considerations:
For applications requiring RoHS compliance, all FCE17 series variants and HARTING alternatives are suitable replacements. The original FCC17E09PB280 is non-compliant and should be replaced in new designs subject to regulatory requirements.
Frequently Asked Questions (FAQ)
Q: Can the FCE17E09PB280 directly replace the FCC17E09PB280 in existing designs?
A: Yes. The FCE17E09PB280 maintains identical electrical and mechanical specifications: 9-position D-Sub plug, 5A current rating, 200V voltage capability, through-hole right-angle solder termination, and -40°C to 85°C operating temperature range. The primary difference is product status and RoHS compliance. Footprint and pin configuration are identical.
Q: What is the difference between the various FCE17 part numbers (PB280, PB200, PB210, PB240, PB250, PB290, PB2D0, PB2E0)?
A: All FCE17 variants listed maintain identical electrical and mechanical specifications. The suffix designations (PB280, PB200, etc.) represent internal manufacturing or configuration codes that do not affect functional compatibility. All are suitable for direct substitution of the FCC17E09PB280.
Q: Are the HARTING 09651626815 and 09651626816 fully compatible with the FCC17E09PB280?
A: The HARTING parts provide functional equivalence with enhanced specifications. Both maintain the 9-position D-Sub plug configuration and through-hole right-angle solder termination. Differences include: higher current rating (6.5A versus 5A), extended operating temperature range (-55°C to 125°C versus -40°C to 85°C), different flange feature configurations (M3 or 4-40 versus unthreaded), stamped contact form (versus machined), and copper alloy contact material (versus phosphor bronze). These differences do not prevent functional substitution in applications within the original electrical specifications.
Q: What is the difference between HARTING 09651626815 and 09651626816?
A: Both parts are electrically and mechanically equivalent with identical 9-position D-Sub plug configuration, 6.5A current rating, and -55°C to 125°C operating temperature. The primary difference is the flange feature: 09651626815 features M3 housing/shell configuration, while 09651626816 features 4-40 housing/shell configuration. Selection depends on mounting requirements and PCB design specifications.
Q: Is the FCC17E09PB280 still available for purchase?
A: The FCC17E09PB280 is classified as obsolete. However, 847 pieces are currently in stock. For new designs and long-term supply assurance, active alternatives such as the FCE17 series or HARTING equivalents are recommended.
Q: Do all substitute parts meet UL94 V-0 flammability requirements?
A: Yes. The FCC17E09PB280, all FCE17 variants, and both HARTING alternatives meet UL94 V-0 material flammability rating requirements.
Q: What is the moisture sensitivity level (MSL) for these connectors?
A: All listed parts have MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.
Q: Are there differences in contact finish between the main part and substitutes?
A: The FCC17E09PB280 and all FCE17 variants feature gold contact finish at 15.0µin (0.38µm) thickness. The HARTING alternatives do not specify contact finish in the provided parameters. For applications requiring specific contact finish specifications, the FCE17 series is recommended.
Q: Can these connectors be used in applications exceeding 5A current?
A: The FCC17E09PB280 and FCE17 series are rated for 5A maximum current. The HARTING alternatives (09651626815 and 09651626816) are rated for 6.5A and are suitable for higher current applications within that rating. Application requirements must not exceed the specified current rating of the selected part.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts