FCC17E09PB200 D-Sub Connector Equivalent & Substitute Parts

Part Overview

The FCC17E09PB200 is a 9-position D-Sub plug connector with right-angle solder termination manufactured by Amphenol ICC. This connector features male pins, through-hole mounting, and is designed for signal applications with a 5A current rating and 200V voltage rating. The product is classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for new designs and production continuity.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Material Flammability Rating	UL94 V-0
Backset Spacing	0.405" (10.29mm)
Features	Board Lock, Filter, Grounding Indents
Contact Material	Phosphor Bronze
Dielectric Material	Thermoplastic
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution of the FCC17E09PB200 is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Parameters:

Connector type (Plug, Male Pins)
Number of positions (9)
Number of rows (2)
Shell size and layout (1 / DE, E)
Current rating (5A minimum)
Voltage rating (200V minimum)
Contact finish (Gold)
Contact finish thickness (15.0µin / 0.38µm)

Mechanical Compatibility Parameters:

Mounting type (Through Hole, Right Angle)
Termination method (Solder)
Backset spacing (0.405" / 10.29mm)
Shell material (Steel)
Flange feature (Housing/Shell, Unthreaded or threaded variants)
Operating temperature range (-40°C ~ 85°C minimum)

Compliance Parameters:

Material flammability rating (UL94 V-0)
Moisture sensitivity level (MSL 1)

Substitute parts are grouped into two categories: Amphenol ICC FCE17 Series (active status, RoHS compliant alternatives) and HARTING 09651626 Series (active status, ROHS3 compliant alternatives with extended operating temperature range).

Parameter Comparison

Parameter	FCC17E09PB200	FCE17E09PB200	FCE17E09PB210	FCE17E09PB240	FCE17E09PB250	FCE17E09PB280	FCE17E09PB290	FCE17E09PB2D0	FCE17E09PB2E0	09651626815	09651626816
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not Specified	Not Specified
Contact Finish Thickness	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	Not Specified	Not Specified
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Backset Spacing	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.409" (10.40mm)	0.409" (10.40mm)
Features	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Grounding Indents	Board Lock, Grounding Indents
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Primary Recommendation: Amphenol ICC FCE17 Series

The FCE17E09PB200, FCE17E09PB210, FCE17E09PB240, FCE17E09PB250, FCE17E09PB280, FCE17E09PB290, FCE17E09PB2D0, and FCE17E09PB2E0 connectors are direct functional equivalents to the FCC17E09PB200. All variants maintain identical electrical and mechanical specifications including 9-position configuration, 5A current rating, gold-plated contacts at 15.0µin thickness, UL94 V-0 flammability rating, and -40°C to 85°C operating temperature range. These parts are manufactured by Amphenol ICC and carry active product status with RoHS compliance, addressing the obsolescence of the original FCC17E09PB200. The FCE17 series variants differ only in dielectric material composition (Thermoplastic, Glass Filled) and internal design features, with no impact on connector interface compatibility.

Secondary Recommendation: HARTING 09651626 Series

The HARTING 09651626815 and 09651626816 connectors provide functional equivalence with extended operating temperature capability (-55°C to 125°C) and higher current rating (6.5A). These parts maintain the same 9-position D-Sub configuration, through-hole right-angle solder termination, and UL94 V-0 flammability rating. HARTING parts carry ROHS3 compliance and active product status. The backset spacing of 0.409" (10.40mm) differs marginally from the original 0.405" (10.29mm), and contact finish specifications are not provided. These connectors are suitable for applications requiring enhanced thermal performance or higher current capacity.

Compliance Consideration:

The original FCC17E09PB200 is RoHS non-compliant. All recommended substitutes are RoHS compliant (Amphenol ICC FCE17 series) or ROHS3 compliant (HARTING series), meeting current regulatory requirements for new designs and production.

Frequently Asked Questions (FAQ)

Q: Can the FCE17E09PB200 directly replace the FCC17E09PB200 in existing designs?

A: Yes. The FCE17E09PB200 maintains identical electrical and mechanical specifications including connector type, pin count, current rating, voltage rating, contact finish, and operating temperature range. The connector interface is fully compatible.

Q: What is the difference between the multiple FCE17 variants (PB200, PB210, PB240, PB250, PB280, PB290, PB2D0, PB2E0)?

A: All FCE17 variants share identical electrical and mechanical interface parameters. Differences exist in internal dielectric material composition and design features that do not affect connector compatibility or performance in standard applications.

Q: Why do the HARTING 09651626815 and 09651626816 have different backset spacing (0.409" vs. 0.405")?

A: The HARTING parts have a backset spacing of 0.409" (10.40mm) compared to the original 0.405" (10.29mm). This 0.04mm difference is within typical manufacturing tolerances for D-Sub connectors and does not prevent mechanical or electrical compatibility in standard PCB applications.

Q: Are the HARTING connectors suitable for all applications using the FCC17E09PB200?

A: HARTING 09651626815 and 09651626816 are suitable for applications requiring the same 9-position D-Sub interface. The extended operating temperature range (-55°C to 125°C) and higher current rating (6.5A) provide additional capability. Contact finish specifications for HARTING parts are not provided; verify compatibility with your application requirements.

Q: What is the significance of RoHS compliance in selecting a substitute?

A: The original FCC17E09PB200 is RoHS non-compliant. All recommended substitutes are RoHS or ROHS3 compliant, meeting regulatory requirements for products sold in markets with RoHS directives. New designs should use RoHS-compliant alternatives.

Q: Can I use the FCE17E09PB250 instead of FCE17E09PB200?

A: Yes. Both parts are Amphenol ICC FCE17 series connectors with identical electrical and mechanical specifications. They are interchangeable for connector interface purposes.

Q: What inventory levels are available for these substitute parts?

A: Inventory availability varies by part number. FCE17E09PB250 has 1075 pieces in stock, FCE17E09PB290 has 970 pieces, FCE17E09PB240 has 875 pieces, FCE17E09PB280 has 769 pieces, FCE17E09PB200 has 764 pieces, FCE17E09PB2E0 has 745 pieces, FCE17E09PB2D0 has 716 pieces, and HARTING 09651626816 has 911 pieces. Consult current inventory systems for real-time availability.

Q: Are there any packaging differences between substitute parts?

A: Amphenol ICC FCE17 series parts are supplied in standard packaging. HARTING 09651626815 is supplied in Bulk packaging, while HARTING 09651626816 is supplied in Bag packaging. Packaging does not affect connector performance or compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message